Antônio Santos Araújo Junior
Research Subjects
Antônio Santos Araújo Junior has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Feliciano José Ricardo Cangue
TotalEnergies, Surface and Coatings Technology
2 shared publications - José Aécio Gomes de Sousa
Universidade Tecnológica Federal do Paraná, Brasil
2 shared publications - Luiz Leroy Thomé Vaughan
Universidade Federal de Itajubá, Brasil
2 shared publications - Elizabeth Mendes de Oliveira
Centro Federal de Tecnologia, Rua do Areal, 522, Pq Mambucaba, Angra dos Reis, CEP 23953-030 Rio de Janeiro, RJ, Brazil
1 shared publication - Izabella Christynne Ribeiro Pinto Valadão
Universidade Federal Fluminense (UFF)
1 shared publication - José Adilson de Castro
Programa de Ps-Graduao em Engenharia Metalrgica, Universidade Federal Fluminense (UFF), Volta Redonda, RJ, Brazil
1 shared publication
Latest Publications
- Open Access
- 3 January 2025
- Published by Universidade Federal de Vicosa in The Journal of Engineering and Exact Sciences
- Vol. 11 (1) , 22392
Environmental and technical evaluation of Babassu and Sunflower oils as cutting fluids for precision drilling in Al-Mg-Si alloys
The increasing global concern with environmental preservation and its impacts on society has driven significant changes in manufacturing processes, many of which are still responsible for pollution. To sustainably meet the growing demand for high-quality products, industries have adopted new environmentally responsible technologies and methodologies. In this context, the pursuit of sustainable alternatives in manufacturing has become essential. Among these, clean drilling of aluminum alloys has gained considerable attention, particularly in sectors where precision and quality are vital to competitiveness. This study conducts a comparative evaluation between a conventional synthetic-based cutting fluid, specifically designed for aluminum machining and two vegetable-based fluids (Babassu oil and Sunflower oil) during constant-pressure drilling of Al6351-T6 aluminum alloy. All fluids were applied using Minimum Quantity Lubrication (MQL). Dry machining tests were also performed. Output parameters included drilling depth, cutting power and chip thickness. The results demonstrated that the vegetable oils were effective and exhibited performance comparable to the commercial cutting fluid. Cutting power was primarily influenced by rotation speed, increasing with higher spindle speeds, while applied load did not significantly affect this variable. Drilling depth was directly affected by both the cutting fluids and operational parameters, with better outcomes observed under lubricated conditions, particularly when using the Quimatic fluid.
- 3 January 2025
- Published by Universidade Federal de Vicosa in The Journal of Engineering and Exact Sciences
- Vol. 11 (1) , 22392
Open AccessEnvironmental and technical evaluation of Babassu and Sunflower oils as cutting fluids for precision drilling in Al-Mg-Si alloys
The increasing global concern with environmental preservation and its impacts on society has driven significant changes in manufacturing processes, many of which are still responsible for pollution. To sustainably meet the growing demand for high-quality products, industries have adopted new environmentally responsible technologies and methodologies. In this context, the pursuit of sustainable alternatives in manufacturing has become essential. Among these, clean drilling of aluminum alloys has gained considerable attention, particularly in sectors where precision and quality are vital to competitiveness. This study conducts a comparative evaluation between a conventional synthetic-based cutting fluid, specifically designed for aluminum machining and two vegetable-based fluids (Babassu oil and Sunflower oil) during constant-pressure drilling of Al6351-T6 aluminum alloy. All fluids were applied using Minimum Quantity Lubrication (MQL). Dry machining tests were also performed. Output parameters included drilling depth, cutting power and chip thickness. The results demonstrated that the vegetable oils were effective and exhibited performance comparable to the commercial cutting fluid. Cutting power was primarily influenced by rotation speed, increasing with higher spindle speeds, while applied load did not significantly affect this variable. Drilling depth was directly affected by both the cutting fluids and operational parameters, with better outcomes observed under lubricated conditions, particularly when using the Quimatic fluid.
- Open Access
- 3 January 2025
- Published by Universidade Federal de Vicosa in The Journal of Engineering and Exact Sciences
- Vol. 11 (1) , 21563
Assessing the efficiency of environmentally sustainable cutting fluids in industrial machining applications
The drive towards sustainable manufacturing processes has led to a renewed focus on environmentally friendly alternatives in the industrial sector. Initially, the technological evolution focused on efficiency while overlooking the harmful consequences for operators and the environment. However, increasing concerns about environmental pollution and the need to comply with regulations prompted revisions in cutting fluid compositions to eliminate toxic agents with detrimental environmental impacts. This study meticulously examines the potential of various vegetable oils, including babassu, canola, cotton, corn, soya, and sunflower, as cutting fluids, comparing their performance to the well-established commercial oil LB2000. The assessment encompasses critical parameters, notably wettability, cooling efficiency, and lubricity. Our findings indicate that these edible oils exhibit behaviors closely mirroring those of the industry-standard LB2000, affirming their compatibility with machining operations. The adoption of edible oils as cutting fluids presents a compelling avenue, underpinned by their biodegradability and the prevailing global inclination towards reducing reliance on petroleum-based cutting fluids. In terms of practicality, these tested vegetable oils demonstrate remarkable suitability as cutting fluids, offering enhanced lubricity, particularly in the cutting region. Supplementary tests, spanning wetting properties, cooling capabilities, and lubricity, reaffirmed these vegetable oils' efficacy as cutting fluids, squarely within the boundaries of acceptability for industrial machining. In summary, this investigation highlights the viability of vegetable oils as sustainable and high-performance substitutes for conventional cutting fluids in industrial applications.
- 3 January 2025
- Published by Universidade Federal de Vicosa in The Journal of Engineering and Exact Sciences
- Vol. 11 (1) , 21563
Open AccessAssessing the efficiency of environmentally sustainable cutting fluids in industrial machining applications
The drive towards sustainable manufacturing processes has led to a renewed focus on environmentally friendly alternatives in the industrial sector. Initially, the technological evolution focused on efficiency while overlooking the harmful consequences for operators and the environment. However, increasing concerns about environmental pollution and the need to comply with regulations prompted revisions in cutting fluid compositions to eliminate toxic agents with detrimental environmental impacts. This study meticulously examines the potential of various vegetable oils, including babassu, canola, cotton, corn, soya, and sunflower, as cutting fluids, comparing their performance to the well-established commercial oil LB2000. The assessment encompasses critical parameters, notably wettability, cooling efficiency, and lubricity. Our findings indicate that these edible oils exhibit behaviors closely mirroring those of the industry-standard LB2000, affirming their compatibility with machining operations. The adoption of edible oils as cutting fluids presents a compelling avenue, underpinned by their biodegradability and the prevailing global inclination towards reducing reliance on petroleum-based cutting fluids. In terms of practicality, these tested vegetable oils demonstrate remarkable suitability as cutting fluids, offering enhanced lubricity, particularly in the cutting region. Supplementary tests, spanning wetting properties, cooling capabilities, and lubricity, reaffirmed these vegetable oils' efficacy as cutting fluids, squarely within the boundaries of acceptability for industrial machining. In summary, this investigation highlights the viability of vegetable oils as sustainable and high-performance substitutes for conventional cutting fluids in industrial applications.
- Open Access
- 1 February 2015
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (2) , 13604-13611
CHARACTERISATION OF NANOPARTICLE SIZE OF TIO2 USING NANOPARTICLE TRACKING ANALYSIS (NTA)
The study of nanoparticles involves a new bias research in various areas of technology, whose production and use have been offering multiple benefits to society...
- 1 February 2015
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (2) , 13604-13611
Open AccessCHARACTERISATION OF NANOPARTICLE SIZE OF TIO2 USING NANOPARTICLE TRACKING ANALYSIS (NTA)
The study of nanoparticles involves a new bias research in various areas of technology, whose production and use have been offering multiple benefits to society...