Zixi Wan
Research Subjects
Zixi Wan has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Zhiyong Fan
The Hong Kong University of Science and Technology
4 shared publications Chak Lam Jonathan Chan
The Hong Kong University of Science and Technology
3 shared publications- Chen Wang
The Hong Kong University of Science and Technology
3 shared publications Feng Xue
The Hong Kong University of Science and Technology
3 shared publicationsWeiqi Zhang
The Hong Kong University of Science and Technology
3 shared publicationsWenhao Ye
Department of Electronic and Computer Engineering
2 shared publications
Latest Publications
- Open Access
- 28 July 2026
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 11 (8) , 6682-6691
Nanostructured Catalytic Filter-Assisted Nanotube Array Sensor for Selective NO2 Detection
NO2 detection is crucial for protecting the public health and understanding atmospheric chemistry. SnO2-based chemiresistive NO2 gas sensors inherently suffer from poor selectivity because of their inherent non-specific adsorption. While bilayer catalytic filters have improved selectivity for decades, signal crosstalk from the top catalytic filter remains a fundamental limitation. To overcome this, we developed a porous alumina membrane-based nanotube array gas sensor with a vertical top−bottom signal electrode structure. An in situ grown reticulate ZnO nanosheet filter was integrated on the sensor surface. This design provides high catalytic activity while the top−bottom signal electrode configuration effectively insulates the sensing element from the filter-induced signal interference. As a result, the ZnO nanosheet filter-assisted sensor achieves excellent selectivity for NO2, exhibiting negligible responses to ethanol, formaldehyde, toluene, CO, NH3, and NO. The sensor demonstrates high sensitivity (815% to 1 ppm NO2) with the theoretical detection limit of 1.86 ppb (in dry air) at 250 °C. Moreover, the interference of humidity on the sensing response is remarkably inhibited by the ZnO nanosheet filter. Meanwhile, the sensor shows comparable accuracy with a commercial electrochemical (EC) NO2 sensor module. In addition, we demonstrated the sensor’s potential miniaturization and mass production using a highly compatible lithography process, resulting in the sensor size down to 10 μm.
- 28 July 2026
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 11 (8) , 6682-6691
Open AccessNanostructured Catalytic Filter-Assisted Nanotube Array Sensor for Selective NO2 Detection
NO2 detection is crucial for protecting the public health and understanding atmospheric chemistry. SnO2-based chemiresistive NO2 gas sensors inherently suffer from poor selectivity because of their inherent non-specific adsorption. While bilayer catalytic filters have improved selectivity for decades, signal crosstalk from the top catalytic filter remains a fundamental limitation. To overcome this, we developed a porous alumina membrane-based nanotube array gas sensor with a vertical top−bottom signal electrode structure. An in situ grown reticulate ZnO nanosheet filter was integrated on the sensor surface. This design provides high catalytic activity while the top−bottom signal electrode configuration effectively insulates the sensing element from the filter-induced signal interference. As a result, the ZnO nanosheet filter-assisted sensor achieves excellent selectivity for NO2, exhibiting negligible responses to ethanol, formaldehyde, toluene, CO, NH3, and NO. The sensor demonstrates high sensitivity (815% to 1 ppm NO2) with the theoretical detection limit of 1.86 ppb (in dry air) at 250 °C. Moreover, the interference of humidity on the sensing response is remarkably inhibited by the ZnO nanosheet filter. Meanwhile, the sensor shows comparable accuracy with a commercial electrochemical (EC) NO2 sensor module. In addition, we demonstrated the sensor’s potential miniaturization and mass production using a highly compatible lithography process, resulting in the sensor size down to 10 μm.
- Top Cited Papers
- 13 January 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (3) , 3066-3077
A High-Performance Artificial Olfactory Chip for Real-Time Cold Chain Food Freshness Monitoring
Intelligent food freshness monitoring systems are in urgent demand for food safety and quality assurance in modern cold chain transportation. Conventional monitoring techniques are rendered impractical within the hermetic confines of refrigeration units. Conversely, the utilization of electronic olfactory systems to discern distinct volatile molecules emitted by food stored during the deterioration process presents an effective monitoring remedy. In this study, an artificial olfactory chip featuring a nine-box-grid configured gas sensor array (9-Array) has been designed for smart cold chain management. Through its nanotubular design, the 9-Array chip exhibits remarkable sensitivity and discriminability to ammonia (NH3), ethanol (EtOH), trimethylamine (TMA), and hydrogen sulfide (H2S) emitted from decaying meat, vegetables, and fruits. Notably, this chip excels in accurately categorizing these gases and their combinations by leveraging distinct responses from individual sensor pixels, enabling the precise differentiation of overlapping gas signatures originating from diverse food sources. When seamlessly integrated into a food freshness monitoring system within a refrigerated environment, the 9-Array chip showcases reliable real-time monitoring capabilities and sustained performance over extended periods. It possesses the capability to recognize at least 7 types of foods and evaluate their freshness over 7 days. Moreover, our olfactory chip adeptly identifies and evaluates the freshness of varied food items within mixed food contexts, showing its potential as a future key component for advanced smart cold chain food management platforms that elevate food management efficiency and safety standards.
- 13 January 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (3) , 3066-3077
Top Cited PapersA High-Performance Artificial Olfactory Chip for Real-Time Cold Chain Food Freshness Monitoring
Intelligent food freshness monitoring systems are in urgent demand for food safety and quality assurance in modern cold chain transportation. Conventional monitoring techniques are rendered impractical within the hermetic confines of refrigeration units. Conversely, the utilization of electronic olfactory systems to discern distinct volatile molecules emitted by food stored during the deterioration process presents an effective monitoring remedy. In this study, an artificial olfactory chip featuring a nine-box-grid configured gas sensor array (9-Array) has been designed for smart cold chain management. Through its nanotubular design, the 9-Array chip exhibits remarkable sensitivity and discriminability to ammonia (NH3), ethanol (EtOH), trimethylamine (TMA), and hydrogen sulfide (H2S) emitted from decaying meat, vegetables, and fruits. Notably, this chip excels in accurately categorizing these gases and their combinations by leveraging distinct responses from individual sensor pixels, enabling the precise differentiation of overlapping gas signatures originating from diverse food sources. When seamlessly integrated into a food freshness monitoring system within a refrigerated environment, the 9-Array chip showcases reliable real-time monitoring capabilities and sustained performance over extended periods. It possesses the capability to recognize at least 7 types of foods and evaluate their freshness over 7 days. Moreover, our olfactory chip adeptly identifies and evaluates the freshness of varied food items within mixed food contexts, showing its potential as a future key component for advanced smart cold chain food management platforms that elevate food management efficiency and safety standards.
- 5 November 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (11) , 8447-8457
Inkjet-Printed Wearable E-nose with Liquid-Phase Ligand-Exchanged Quantum Dots for Human-Centered Gas/Odor Monitoring
The development of next-generation wearable electronic nose (e-nose) systems for real-time environmental monitoring requires miniaturized gas sensor arrays with high sensitivity and low-power operation. Current limitations persist in the incompatibility between conventional sensing material deposition methods and MEMS microheater architectures. Here, we present an intelligent wristwatch-formatted e-nose system, integrating a printable quantum dot (QD) sensor array fabricated using an optimized colloidal quantum dot (CQD) ink formulation and a precision inkjet printing strategy. We engineered metal cation-surrounded quantum dots (MCSQDs) via liquid-phase ligand exchange with transition metal chlorides (FeCl3, CoCl2, NiCl2, CuCl2), achieving tailored surface functionalities and enhanced gas discrimination capabilities. The engineered MCSQD inks demonstrated exceptional colloidal stability and seamless MEMS microheater integration, enabling gas sensors with parts-per-billion-level detection limits (4 ppb ethanol). A 16-unit sensor array was embedded into a wearable platform incorporating cloud-based neural network processing. System validation achieved 100% classification accuracy in indoor odor recognition tests using a fully connected neural network (FCNN), while field tests at a transportation hub demonstrated reliable monitoring of Total Volatile Organic Compounds (TVOC), NO2, SO2, and CO with <15% deviation from the reference sensors. This work establishes a viable manufacturing framework bridging quantum-confined material engineering to IoT-enabled artificial olfaction, paving the way for scalable production of QD gas sensor array-based e-noses.
- 5 November 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (11) , 8447-8457
Inkjet-Printed Wearable E-nose with Liquid-Phase Ligand-Exchanged Quantum Dots for Human-Centered Gas/Odor Monitoring
The development of next-generation wearable electronic nose (e-nose) systems for real-time environmental monitoring requires miniaturized gas sensor arrays with high sensitivity and low-power operation. Current limitations persist in the incompatibility between conventional sensing material deposition methods and MEMS microheater architectures. Here, we present an intelligent wristwatch-formatted e-nose system, integrating a printable quantum dot (QD) sensor array fabricated using an optimized colloidal quantum dot (CQD) ink formulation and a precision inkjet printing strategy. We engineered metal cation-surrounded quantum dots (MCSQDs) via liquid-phase ligand exchange with transition metal chlorides (FeCl3, CoCl2, NiCl2, CuCl2), achieving tailored surface functionalities and enhanced gas discrimination capabilities. The engineered MCSQD inks demonstrated exceptional colloidal stability and seamless MEMS microheater integration, enabling gas sensors with parts-per-billion-level detection limits (4 ppb ethanol). A 16-unit sensor array was embedded into a wearable platform incorporating cloud-based neural network processing. System validation achieved 100% classification accuracy in indoor odor recognition tests using a fully connected neural network (FCNN), while field tests at a transportation hub demonstrated reliable monitoring of Total Volatile Organic Compounds (TVOC), NO2, SO2, and CO with <15% deviation from the reference sensors. This work establishes a viable manufacturing framework bridging quantum-confined material engineering to IoT-enabled artificial olfaction, paving the way for scalable production of QD gas sensor array-based e-noses.
- Open Access
- 17 March 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (15) , 5989-5996
Metal–Organic Frameworks-Based Microrockets for Controlled and Sustained Drug Release
Gastritis, linked to chronic stress and poor diets, poses significant risks, including ulcers and gastric cancers. Current treatments involving frequent dosing of multiple drugs face challenges with patient nonadherence and antibiotic resistance. To overcome these issues, metal-organic framework (MOF)-based microrockets utilizing a zinc-powered engine were engineered with pH-sensitive coatings for targeted gastritis treatment. These microrockets can self-propel into the gastric mucus via bubble propulsion and slowly release pharmaceutical ingredients from MOF components. A poly(3,4-ethylenedioxythiophene) shell and pH-sensitive enteric coating is designed for protection of MOFs in acid while allowing sustained drug release at the mucosa's neutral pH. In vivo studies demonstrate these microrockets sustain a prolonged drug retention for 48 h. This biocompatible design represents a promising strategy for active and controlled drug delivery with sustained release in acidic environments, presenting the potential for diverse biomedical applications.
- 17 March 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (15) , 5989-5996
Open AccessMetal–Organic Frameworks-Based Microrockets for Controlled and Sustained Drug Release
Gastritis, linked to chronic stress and poor diets, poses significant risks, including ulcers and gastric cancers. Current treatments involving frequent dosing of multiple drugs face challenges with patient nonadherence and antibiotic resistance. To overcome these issues, metal-organic framework (MOF)-based microrockets utilizing a zinc-powered engine were engineered with pH-sensitive coatings for targeted gastritis treatment. These microrockets can self-propel into the gastric mucus via bubble propulsion and slowly release pharmaceutical ingredients from MOF components. A poly(3,4-ethylenedioxythiophene) shell and pH-sensitive enteric coating is designed for protection of MOFs in acid while allowing sustained drug release at the mucosa's neutral pH. In vivo studies demonstrate these microrockets sustain a prolonged drug retention for 48 h. This biocompatible design represents a promising strategy for active and controlled drug delivery with sustained release in acidic environments, presenting the potential for diverse biomedical applications.