WHWenjie Hao

Wenjie Hao

*This is an algorithmically generated author record based on publicly available information.

Wenjie Hao has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental and Numerical Investigation of Single Bubble Condensation: Influence of the Shrinkage-Induced Volume Effect

    by Wenjie Hao, Yao Liu, Jinyu Han, Jiechen Wu, Chenru Zhao, Hanliang Bo

    In heat exchange equipment such as Pressurized Water Reactor (PWR) cores and steam generators, the wall heat flux and vapor phase distribution are critical parameters that directly govern the heat transfer, turbulence intensity, and flow instability within the flow channels. Bubble condensation represents pivotal processes that significantly influence these parameters. While the wake structures of single bubbles under adiabatic conditions have been extensively investigated, research regarding the wake characteristics of a single condensing bubble remains scarce. In this study, experiments on single bubble condensation in subcooled pool boiling were conducted. An experimental database concerning the variation of single bubble diameter was established within a subcooling range of 4.5 K to 29.3 K, providing detailed benchmark data for numerical simulations involving vapor-liquid condensation. Numerical simulations of single bubble condensation were performed by coupling the Volume of Fluid-Continuous Surface Force (VOF-CSF) and Lee models. Furthermore, a semi-empirical prediction model for the phase change coefficient (L) was developed based on the thermal diffusivity (α), initial bubble diameter (D0), and Jakob number (Ja), extending the applicability of the Lee model. Moreover, numerical simulations were conducted to investigate single bubble condensation under zero-gravity conditions using the improved Lee model, providing a detailed analysis of the impact of condensation as the primary driving force on flow field characteristics. The ”volume effect” induced by the volumetric shrinkage of the condensing bubble was identified. Furthermore, the concept of a ”Condensation-affected Zone” was proposed, and its length (Lc) was quantitatively defined. Additionally, numerical simulations of single bubble condensation under gravity conditions were performed. Comparisons with the flow field of an adiabatic rising bubble revealed that the volume effect caused by condensation shrinkage expands the range of the bubble wake region, intensifies the vortices, velocity, and velocity gradients within the wake, and attenuates potential flow disturbances. Results show that the condensation volume effect on wake velocity characteristics becomes more pronounced with larger bubble diameters and higher subcooling degrees.

  • Open Access

    A Unified Model for Nucleate Boiling Heat Transfer under Combined Inclination and Subcooling Effects

    by Jinyu Han, Wen He, Wenjie Hao, Yao Liu, Jiechen Wu, Zhiyuan Sun, Chenru Zhao, Hanliang Bo

    Nucleate boiling, as an efficient phase-change heat transfer mechanism, holds significant application value in the realm of nuclear reactor safety. The In-Vessel Retention-External Reactor Vessel Cooling (IVR-ERVC) technology, which relies on nucleate boiling along the external wall of the reactor pressure vessel to cool and retain molten core materials, represents a crucial measure for addressing severe accidents. However, current research on the combined effects of inclination and subcooling on boiling mechanisms such as in the IVR-ERVC technology is limited, and there is a lack of available boiling heat transfer models that account for these effects. This study aims to establish a unified nucleate boiling heat transfer model that simultaneously considers both effects.,To achieve this, a statistical analysis was conducted to investigate the patterns of these two effects. For subcooled pool boiling, a database comprising 1,333 data points from 22 independent studies was constructed, and a subcooling correction factor was introduced. For inclined pool boiling, a database comprising 2,901 data points from 42 independent studies was used to introduce an inclination correction factor. Additionally, a combined subcooling and inclination database, comprising 340 data points from 3 independent studies, was used for the final validation. To address the limitations of existing experimental data, a series of experimental investigations were conducted, expanding the range of experimental conditions and enriching the database with additional data on combined subcooling and inclination effects. Verification results indicate that the model exhibits good prediction accuracy, with a mean absolute error (MAE) of 26.5% for the experimental data with only subcooling effects, 35.6% for the experimental data with only inclination effects, and 38.5% for the experimental data with combined subcooling and inclination effects. The established model is applicable within a wide range of conditions: atmospheric pressure, smooth surfaces, 0°≤β≤180°, 0 K≤ΔTsub≤85 K, and 1.3 kW/m²≤q≤8610.5 kW/m². The established correlation effectively describes the local heat transfer characteristics of the external surface of the reactor pressure vessel's lower head under IVR-ERVC conditions, thereby providing theoretical support for the analysis of severe accidents in nuclear reactors.

  • Coalescence dynamics of two coaxially rising bubbles: Modeling and semi-empirical analysis of drainage time

    by Wenjie Hao, Yao Liu, Jinyu Han, Chenru Zhao, Hanliang Bo

    Drainage models are crucial for bubble coalescence efficiency, with drainage time being a key parameter. However, existing theoretical models often assume planar liquid films, ignoring bubble deformation effects during coalescence, which reduces their practical applicability and predictive accuracy. To address this limitation, we employ a coupled volume of fluid method and the continuum surface force model to systematically investigate the coalescence dynamics of two coaxially rising gaseous bubbles covering a wide range of operating conditions with Weber numbers (We) of 0.0316–2.5708, Morton numbers (Mo) of 6.895 × 10−9–0.3664, Galileo numbers (Ga) of 6.83–222.92, and Eötvös numbers (Eo) of 1.22–8.7. Through a mechanistic analysis of the dynamic processes involving leading and trailing bubbles, along with the associated variations in the interfacial liquid film thickness during coalescence, we define the contact moment as the characteristic transition point in the vertex velocity of the trailing bubble's upper interface. The initial liquid film thickness and drainage time are systematically quantified based on this definition and a semi-empirical predictive model correlating the initial liquid film thickness with We and Mo is developed. Furthermore, a Ga-Eo phase diagram is constructed to quantify the trailing bubble's shape at the contact moment. Moreover, a systematic assessment and subsequent modification of Chesters model, originally derived under the planar film assumption, are performed. Finally, novel semi-empirical drainage time models are developed by incorporating effects of bubble shape and central symmetry, significantly enhancing predictive accuracy and extending applicability.


  • Improved Eulerian–Lagrangian modeling of bubble coalescence and breakup in bubble columns

    by Yao Liu, Wenjie Hao, Jinyu Han, Wen He, Chenru Zhao, Hanliang Bo

    This study presents an improved Eulerian–Lagrangian modeling of bubble dynamics, including coalescence and breakup in bubble columns. The influences of bubble coalescence and breakup models on simulations are investigated. A hard-sphere collision model is employed to track bubble interactions, with bubble breakup governed by a critical Weber number and coalescence modeled using the critical coalescence velocity model and film drainage models. The simulation framework is validated against experimental data from Deen et al. [“Comparison of PIV and LDA measurement methods applied to the gas-liquid flow in a bubble column,” in 10th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2000, Vol. 1] and Lau et al. [“Experimental study of the bubble size distribution in a pseudo-2D bubble column,” Chem. Eng. Sci. 98, 203–211 (2013)]. Results show that the breakup model with a critical Weber number of 0.2, combined with the Tomiyama lift force and stochastic dispersion models, produces predictions closest to experimental data, although further improvements are still needed under various flow conditions, incorporating more detailed turbulence effects. Moreover, a comparative analysis of coalescence efficiency shows that the critical coalescence velocity model gives more accurate results than both film drainage models and the Eulerian–Eulerian Prince model, particularly in high-turbulence regions. Simulation results indicate that at lower superficial gas velocities (5–10 mm/s), the bubble size distribution is unimodal, while at higher velocities (15–20 mm/s), it becomes bimodal due to enhanced breakup and coalescence effects. Additionally, this study presents statistical coalescence efficiency results and compares with those using the widely adopted Prince model in the Eulerian–Eulerian framework, offering insights into discrepancies between Eulerian–Lagrangian and Eulerian–Eulerian models. The findings highlight the advantages of using a physically based approach to model bubble dynamics and provide a valuable reference for refining the coalescence model in the population balance method in the Eulerian–Eulerian framework.