FHFatiha Hamidi

Fatiha Hamidi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Fatiha Hamidi has a total of 6 co-authors. Here are the top co-authors by number of shared publications:

  • Ikram Yssaad

    Mohamed Boudiaf University of Science and Technology, Faculty of Chemistry, Laboratory of Functional and Nanostructured Ecomaterials El Mnaouar, BP 1505, Bir El Djir 31000 Oran Algeria

    2 shared publications
  • Denis Luart

    Université de Technologie de Compiègne, ESCOM, Alliance Sorbonne Université, TIMR, Centre Pierre Guillaumat Rue du Dr Schweitzer 60203 Compiègne Cedex France

    1 shared publication
  • Denis Luart

    ESCOM Université de Technologie de Compiègne Alliance+ Sorbonne Université TIMR Compiègne France

    1 shared publication
  • Fatiha Talhaoui

    Mohamed Boudiaf University of Science and Technology, Faculty of Chemistry, Laboratory of Functional and Nanostructured Ecomaterials, Oran, Algeria

    1 shared publication
  • Francesc Medina

    Departament d'Enginyeria Química, Universitat Rovira i Virgili Av. Països Catalans, 26 Tarragona 43007 Spain

    1 shared publication
  • Franscisco Medina

    Chemical Engineering Department, Universitat Rovira I Virgili, 43007 Tarragona, Spain

    1 shared publication

Latest Publications

  • Open Access

    Evaluation of Ag-, Fe- and Ni-exchanged mordenite for the reduction of 4-nitrophenol under different reduction pathways.

    by Ikram Yssaad, Fatiha Hamidi, Denis Luart, Francesc Medina

    Mordenite (MOR) zeolite was hydrothermally synthesized and subsequently modified via ion exchange with Ag+, Fe3+, and Ni2+ ions. The resulting catalysts were evaluated for the reduction of 4-nitrophenol (4-NP) using two approaches: chemical reduction in the presence of NaBH4 and continuous-flow catalytic hydrogenation in an H-Cube Pro reactor (ThalesNano) using hydrogen generated by water electrolysis. The materials were comprehensively characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption at 77 K, X-ray fluorescence (XRF), infrared spectroscopy (FTIR), UV-Vis spectroscopy, and scanning electron microscopy (SEM). Characterization results showed that the mordenite framework remained intact after metal incorporation, although slight decreases in textural properties were observed. Among the catalysts, AgMOR exhibited the highest activity for the NaBH4mediated reduction of 4-NP, achieving 98% conversion, which is attributed to the high dispersion and accessibility of silver species within the zeolite channels. Under continuous-flow hydrogenation, AgMOR, NiMOR, and FeMOR achieved conversions of 89%, 92%, and 60%, respectively, demonstrating the benefits of continuous-flow operation and the critical role of metal-support interactions in determining catalytic performance.

  • Open Access

    Comparative study of two different zeolites BEA and ZSM-5 exchanged by copper and iron via the oxidation of phenol by hydrogen peroxide

    by Fatiha Talhaoui, Fatiha Hamidi, Fransisco Medina

    Introduction/Purpose: Water pollution by organic compounds such as phenol poses a major environmental risk. This study aims to compare the catalytic efficiency of ZSM-5 and BEA zeolites, doped with iron (Fe) and copper (Cu), for the wet oxidation of phenol using hydrogen peroxide (H₂O₂). Method: BEA and ZSM-5 zeolites were synthesized via hydrothermal methods, then ion-exchanged to incorporate Cu²⁺ and Fe²⁺. The catalysts were characterized using XRD, FTIR, SEM, and XPS. Phenol oxidation was carried out at 80 °C in aqueous medium with an H₂O₂/phenol molar ratio ranging from 10:1 to 15:1. The reaction products were analyzed by HPLC. Results: The crystalline structures of the zeolites were maintained after ion exchange. The metals were well dispersed on the surface. Fe-BEA and Fe-ZSM-5 catalysts showed the highest activity (up to 99% conversion), followed by Cu-BEA (88%) and Cu-ZSM-5 (68%). The pure zeolites exhibited low activity (<10%). The optimal H₂O₂/phenol ratio was 14:1. Fe-BEA proved to be the most effective, combining high activity with enhanced diffusion within the pores. Conclusion: Iron-exchanged zeolites, particularly Fe-BEA, are highly effective catalysts for phenol oxidation in aqueous media, outperforming both copper-doped and pure forms. Conclusion: Iron-exchanged zeolites, particularly Fe-BEA, are highly effective catalysts for phenol oxidation in aqueous media, outperforming both copper-doped and pure forms. The porous structure and the nature of the metal are key factors determining catalytic performance.

  • Open Access

    Effect of variations in parameters on the crystallization of mordenite zeolite

    by Ikram Yssaad, Fatiha Hamidi, Denis Luart

    Introduction/purpose: This study highlights the importance of synthesis parameters in the crystallization of mordenite zeolite. Precise control of the SiO₂/Al₂O₃ ratio, alkalinity and crystallization time results in mordenite crystals with high crystallinity and optimum purity, while avoiding the formation of secondary or amorphous phases. Methods: The materials were prepared by the hydrothermal method, using silica gel and sodium aluminate as sources of silicon and aluminum, respectively. Several synthesis parameters were varied, including SiO₂/Al₂O₃ molar ratio, alkalinity (OH-/Si), as well as crystallization time, in order to assess their effect on mordenite crystal formation. Experiments were carried out at a constant temperature of 170°C and 190°C. Results: The results show that the SiO₂/Al₂O₃ ratio plays a crucial role in crystal formation. A low ratio, such as 15, combined with high alkalinity, favors the formation of analcime crystals. On the other hand, a high ratio, such as 30, leads to the formation of mordenite crystals with high crystallinity and purity. However, when this ratio reaches 60 and is combined with low alkalinity, crystalline nucleation is impeded, leading to the formation of an amorphous material. Concerning alkalinity (OH-/Si), the values of 0.39 and 0.49 result in pure, well-crystallized mordenite crystals, while higher values, such as 0.59, lead to the formation of secondary phases. With regard to crystallization time, the periods of 48 and 72 hours at 170°C produced pure, well-crystallized mordenite crystals. Conclusion: This study highlights the importance of synthesis parameters in the crystallization of mordenite zeolite. Precise control of the SiO₂/Al₂O₃ ratio, alkalinity and crystallization time results in mordenite crystals with high crystallinity and optimum purity, while avoiding the formation of secondary or amorphous phases.