Tham Tran Hong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tham Tran Hong has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Hieu Van Le
Hong Duc University
2 shared publications Hue Thi Nguyen
Faculty of Natural Sciences, Hong Duc University, 565 Quang Trung Street, Thanh Hoa City
2 shared publications- Lanh Chu Van
Department of Physics, Vinh University, Vinh, Vietnam
2 shared publications An Nguyen Manh
Faculty of Engineering, Technology, and Communication, Hong Duc University, 565 Quang Trung Street, Thanh Hoa City, Vietnam
1 shared publication- Ben Chu Van
Posts and Telecommunications Institute of Technology
1 shared publication Bien Chu Van
Yersin Da Lat University, 27 Ton That Tung, Ward 8, Da Lat City, Vietnam
1 shared publication
Latest Publications
- Open Access
- 28 May 2026
- Published by Publishing House for Science and Technology, Vietnam Academy of Science and Technology (Publications) in Communications in Physics
Investigation of the effective refractive index in suspended core photonic crystal fiber based on As2S3 with CS2-filled air holes
This study investigates how the structural parameters of suspended-core photonic crystal fibers (SC-PCFs) influence their effective refractive index (neff), focusing on designs based on arsenic sulfide (As₂S₃) with carbon disulfide (CS₂)-filled air holes. As₂S₃ provides a high nonlinear refractive index and wide infrared transparency, while CS₂ infiltration enables enhanced optical control due to its high refractive index. Using Lumerical Mode Solutions, numerical simulations were conducted for TE₀₀ and TE₁₀₀ modes across the wavelength range from 2 to 5 μm, with structure ratios (w/ ) varying from 0.35 to 0.85. Results show that neff increases with slot width and reaches 2.2251 at 2150 nm for CS₂-filled designs. Compared to air-filled fibers, CS₂ infiltration improves refractive index control and optical confinement. These results provides quantitative design guidance for optimizing modal confinement and birefringence in SC-PCFs targeting nonlinear and polarization-sensitive applications in the mid-infrared regime.
- 28 May 2026
- Published by Publishing House for Science and Technology, Vietnam Academy of Science and Technology (Publications) in Communications in Physics
Open AccessInvestigation of the effective refractive index in suspended core photonic crystal fiber based on As2S3 with CS2-filled air holes
This study investigates how the structural parameters of suspended-core photonic crystal fibers (SC-PCFs) influence their effective refractive index (neff), focusing on designs based on arsenic sulfide (As₂S₃) with carbon disulfide (CS₂)-filled air holes. As₂S₃ provides a high nonlinear refractive index and wide infrared transparency, while CS₂ infiltration enables enhanced optical control due to its high refractive index. Using Lumerical Mode Solutions, numerical simulations were conducted for TE₀₀ and TE₁₀₀ modes across the wavelength range from 2 to 5 μm, with structure ratios (w/ ) varying from 0.35 to 0.85. Results show that neff increases with slot width and reaches 2.2251 at 2150 nm for CS₂-filled designs. Compared to air-filled fibers, CS₂ infiltration improves refractive index control and optical confinement. These results provides quantitative design guidance for optimizing modal confinement and birefringence in SC-PCFs targeting nonlinear and polarization-sensitive applications in the mid-infrared regime.
- Open Access
- 9 December 2025
- Published by Publishing House for Science and Technology, Vietnam Academy of Science and Technology (Publications) in Communications in Physics
- Vol. 36 (3) , 343
Optical properties of photonic crystal fibers made from Ge23Sb7S70 chalcogenide
In this paper, we investigate a photonic crystal fiber (PCF) of Ge23Sb7S70 chalcogenide with five air-hole rings arranged in a regular hexagonal lattice. Using simulations and numerical analyses, we investigated the influence of structural parameters on the optical properties of the PCF. The results show that controlling the lattice constant (Λ) and the filling factor (f = d/Λ) in the cladding allows precise tuning of the dispersion and confinement loss properties over a wide wavelength range. Furthermore, we propose two optimized structures, #F1 (Λ = 2.0 μm, f = 0.35) and # F2 (Λ = 3.0 μm, f = 0.35), which are designed to operate in the all-normal dispersion region and the anomalous dispersion region, respectively, making them promising candidates for super-continuum generation applications.
- 9 December 2025
- Published by Publishing House for Science and Technology, Vietnam Academy of Science and Technology (Publications) in Communications in Physics
- Vol. 36 (3) , 343
Open AccessOptical properties of photonic crystal fibers made from Ge23Sb7S70 chalcogenide
In this paper, we investigate a photonic crystal fiber (PCF) of Ge23Sb7S70 chalcogenide with five air-hole rings arranged in a regular hexagonal lattice. Using simulations and numerical analyses, we investigated the influence of structural parameters on the optical properties of the PCF. The results show that controlling the lattice constant (Λ) and the filling factor (f = d/Λ) in the cladding allows precise tuning of the dispersion and confinement loss properties over a wide wavelength range. Furthermore, we propose two optimized structures, #F1 (Λ = 2.0 μm, f = 0.35) and # F2 (Λ = 3.0 μm, f = 0.35), which are designed to operate in the all-normal dispersion region and the anomalous dispersion region, respectively, making them promising candidates for super-continuum generation applications.
- 1 December 2025
- Published by IOP Publishing in Journal of Optics
- Vol. 27 (12) , 125503
Polarization-maintaining highly nonlinear photonic crystal fiber based on Ge 20 As 20 Se 15 Te 45 chalcogenide for mid-infrared supercontinuum generation
This work presents a polarization-maintaining (PM) highly nonlinear Ge 20 As 20 Se 15 Te 45 chalcogenide photonic crystal fiber (PCF) designed for broadband mid-infrared (MIR) supercontinuum (SC) generation. Through optimization of the PM-PCF’s geometrical parameters, the proposed fiber exhibits ultra-flat normal dispersion properties for the fundamental mode with the x -polarization component. In contrast, the y -polarization fundamental mode, the proposed PCF provides flat anomalous dispersion properties at a pump wavelength of 9.8 μ m. The effects of input energy and pulse width on the spectral profiles and coherence properties of the SC spectrum are investigated. The result is a highly coherent SC extending from 4.98 µ m to 15.08 µ m (a bandwidth of 10.1 µ m) and from 2.9 µ m to 25.2 µ m (a bandwidth of 22.45 µ m) in the MIR region when a pump pulse with a wavelength of 9.8 μ m is used for the designed fiber with the x -polarization and y -polarization factors, respectively. The proposed PM-PCF-based SC source shows potential as a candidate for nonlinear applications, including frequency metrology, optical sensing, and optical tomography.
- 1 December 2025
- Published by IOP Publishing in Journal of Optics
- Vol. 27 (12) , 125503
Polarization-maintaining highly nonlinear photonic crystal fiber based on Ge 20 As 20 Se 15 Te 45 chalcogenide for mid-infrared supercontinuum generation
This work presents a polarization-maintaining (PM) highly nonlinear Ge 20 As 20 Se 15 Te 45 chalcogenide photonic crystal fiber (PCF) designed for broadband mid-infrared (MIR) supercontinuum (SC) generation. Through optimization of the PM-PCF’s geometrical parameters, the proposed fiber exhibits ultra-flat normal dispersion properties for the fundamental mode with the x -polarization component. In contrast, the y -polarization fundamental mode, the proposed PCF provides flat anomalous dispersion properties at a pump wavelength of 9.8 μ m. The effects of input energy and pulse width on the spectral profiles and coherence properties of the SC spectrum are investigated. The result is a highly coherent SC extending from 4.98 µ m to 15.08 µ m (a bandwidth of 10.1 µ m) and from 2.9 µ m to 25.2 µ m (a bandwidth of 22.45 µ m) in the MIR region when a pump pulse with a wavelength of 9.8 μ m is used for the designed fiber with the x -polarization and y -polarization factors, respectively. The proposed PM-PCF-based SC source shows potential as a candidate for nonlinear applications, including frequency metrology, optical sensing, and optical tomography.