Joon-Young Park
Research Subjects
Joon-Young Park has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Kyeong-Rim Yeo
School of Integrative Engineering, Chung-Ang University, 84 Heukseok-ro, Dongjak-gu, Seoul 06974, Republic of Korea
1 shared publication - Soo-Kil Kim
School of Integrative Engineering Chung‐Ang University Seoul Republic of Korea
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Wiley in International Journal of Energy Research
- Vol. 2026 (1)
Tailored Electrodeposition for Scalable Fabrication of Uniform and High‐Efficiency Large‐Area Electrodes for PEM Water Electrolysis
Water electrolysis is a promising route for large‐scale hydrogen production, offering high‐purity output, CO 2 ‐free emissions, and compatibility with renewable energy integration. Among various fabrication techniques, electrodeposition provides a cost‐effective, tunable, and binder‐free method for producing high‐performance electrodes. However, achieving consistent catalyst properties across large electrode areas remains a major challenge in scaling up electrochemical devices such as proton exchange membrane water electrolyzers (PEMWEs). This study presents a systematic electrodeposition approach for fabricating large‐area Cu–Ni–Mo alloy catalysts with homogeneous composition and electrochemical performance across the electrode surface, guided by a previously optimized small‐area reference. A custom‐designed deposition cell enabled independent control of deposition parameters, and the effects of each parameter on catalyst composition, morphology, and hydrogen evolution reaction (HER) activity were thoroughly evaluated. As the electrode area increased, structural modifications to the deposition cell and electrode configurations required adjusting the deposition potential to maintain equivalent deposition conditions. The working–reference electrode distance was identified as a critical parameter that significantly influenced the actual deposition potential and resulting catalyst properties, while the working–counter electrode distance affected deposition uniformity through changes in ion transport dynamics. Under optimized conditions, a 10.2 cm 2 electrode was fabricated and evaluated through subdivided PEMWE tests, yielding consistent performance (2.00 to 2.03 V cell at 2 A cm −2 ) with only minor deviation from the reference catalyst. Scaling up further to 50 cm 2 yielded an average HER overpotential of 18.3 mV at −10 mA cm −2 and maintained excellent uniformity across the electrode. These findings offer a practical and adaptable methodology for fabricating large‐area alloy electrodes with reproducible performance, advancing the scalable deployment of multicomponent catalysts for PEMWE.
- 1 January 2026
- Published by Wiley in International Journal of Energy Research
- Vol. 2026 (1)
Open AccessTailored Electrodeposition for Scalable Fabrication of Uniform and High‐Efficiency Large‐Area Electrodes for PEM Water Electrolysis
Water electrolysis is a promising route for large‐scale hydrogen production, offering high‐purity output, CO 2 ‐free emissions, and compatibility with renewable energy integration. Among various fabrication techniques, electrodeposition provides a cost‐effective, tunable, and binder‐free method for producing high‐performance electrodes. However, achieving consistent catalyst properties across large electrode areas remains a major challenge in scaling up electrochemical devices such as proton exchange membrane water electrolyzers (PEMWEs). This study presents a systematic electrodeposition approach for fabricating large‐area Cu–Ni–Mo alloy catalysts with homogeneous composition and electrochemical performance across the electrode surface, guided by a previously optimized small‐area reference. A custom‐designed deposition cell enabled independent control of deposition parameters, and the effects of each parameter on catalyst composition, morphology, and hydrogen evolution reaction (HER) activity were thoroughly evaluated. As the electrode area increased, structural modifications to the deposition cell and electrode configurations required adjusting the deposition potential to maintain equivalent deposition conditions. The working–reference electrode distance was identified as a critical parameter that significantly influenced the actual deposition potential and resulting catalyst properties, while the working–counter electrode distance affected deposition uniformity through changes in ion transport dynamics. Under optimized conditions, a 10.2 cm 2 electrode was fabricated and evaluated through subdivided PEMWE tests, yielding consistent performance (2.00 to 2.03 V cell at 2 A cm −2 ) with only minor deviation from the reference catalyst. Scaling up further to 50 cm 2 yielded an average HER overpotential of 18.3 mV at −10 mA cm −2 and maintained excellent uniformity across the electrode. These findings offer a practical and adaptable methodology for fabricating large‐area alloy electrodes with reproducible performance, advancing the scalable deployment of multicomponent catalysts for PEMWE.