Amit Prakash Patil
Research Subjects
Research Interests
Amit Prakash Patil has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Paresh Chandra Deka
National Institute of Technology Karnataka
3 shared publications - Sujay Raghavendra Naganna
Department of Civil Engineering Manipal Institute of Technology Bengaluru, Manipal Academy of Higher Education Manipal India
3 shared publications B. M. Sreedhara
Department of Civil Engineering, Siddaganga Institute of Technology, Tumakuru 572103, Karnataka, India
1 shared publicationGeetha Kuntoji
Department of Civil Engineering, BMS College of Engineering, Bengaluru 560019, Karnataka, India
1 shared publication- Girish J. Kulkarni
N K Orchid College of Engineering and Technology
1 shared publication Jagalingam Pushparaj
School of Computer Science and Engineering, Vellore Institute of Technology, Vellore 632014, Tamil Nadu, India
1 shared publication
Latest Publications
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2716 (1)
Improving bearing capacity of soil by incorporating waste tyre
Scarcity of land, an abundance of black cotton soil and the Inherent drawback of black cotton soil (low bearing capacity, swelling and shrinkage) compelled researchers to alter the properties of such soil and utilize the existing soil for its intended purpose. If modification is achieved by using the waste material, which otherwise will be a burden on the land where it is dumped. It will be a source of pollution and will create a variety of health-related issues to human being. Discarded waste tires are becoming a serious threat to health, environment, and ecologically stem worldwide if it is not disposed of properly. The present study aims at improvement of load carrying capacity of soil using rubber tyre waste in the form of strips of size 4cm width, 10cm length and 2cm height interconnected together to span entire area of soil sample. The results obtained made it clear that in absence of any reinforcement the bearing capacity of soil obtained was 120kPa and when it is reinforced with single layer the bearing capacity increased by 6.67%. When two layers were used it increased by 10% and when three layers of reinforcement were used it was found to increase by 16.67%. It was found in the study that no significant change was found in the bearing capacity on increasing the layers further.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2716 (1)
Open AccessImproving bearing capacity of soil by incorporating waste tyre
Scarcity of land, an abundance of black cotton soil and the Inherent drawback of black cotton soil (low bearing capacity, swelling and shrinkage) compelled researchers to alter the properties of such soil and utilize the existing soil for its intended purpose. If modification is achieved by using the waste material, which otherwise will be a burden on the land where it is dumped. It will be a source of pollution and will create a variety of health-related issues to human being. Discarded waste tires are becoming a serious threat to health, environment, and ecologically stem worldwide if it is not disposed of properly. The present study aims at improvement of load carrying capacity of soil using rubber tyre waste in the form of strips of size 4cm width, 10cm length and 2cm height interconnected together to span entire area of soil sample. The results obtained made it clear that in absence of any reinforcement the bearing capacity of soil obtained was 120kPa and when it is reinforced with single layer the bearing capacity increased by 6.67%. When two layers were used it increased by 10% and when three layers of reinforcement were used it was found to increase by 16.67%. It was found in the study that no significant change was found in the bearing capacity on increasing the layers further.
- 25 January 2022
- Published by Springer Nature in Sādhanā
- Vol. 47 (1) , 1-15
Machine learning-based modeling of saturated hydraulic conductivity in soils of tropical semi-arid zone of India
- 25 January 2022
- Published by Springer Nature in Sādhanā
- Vol. 47 (1) , 1-15
Machine learning-based modeling of saturated hydraulic conductivity in soils of tropical semi-arid zone of India
- Open Access
- 3 June 2021
- Published by IWA Publishing in Journal of Hydroinformatics
- Vol. 23 (4) , 849-863
Application of gradient tree boosting regressor for the prediction of scour depth around bridge piers
Scour around bridge piers is a complex phenomenon and it is essential to assess or predict the scour hazard around bridge piers in tandem with completely understanding its mechanism. To date, there is no exact method for the estimation of scour depth. Nowadays, machine learning techniques are being recognized as effective tools for the prediction of scour depth using experimental data. In the present study, gradient tree boosting (GTB) technique was used for the prediction of scour depth around various pier shapes under different streambed conditions. Sediment size, sediment quantity, velocity, and flow time were used as input parameters to predict the scour depth under clear-water and live-bed scour conditions. The scour depth was predicted for different pier shapes such as, circular, rectangular, round-nosed and sharp-nosed shaped. The GTB model predicted scour depth values were compared with that of the group method of data handling (GMDH) technique. The performance of GTB and GMDH models were then evaluated based on statistical indices such as RRMSE, NNSE, WI, MNE, SI, and KGE. The study concludes that the GTB model performance was relatively superior to that of GMDH in the prediction of scour depth around different pier shapes.
- 3 June 2021
- Published by IWA Publishing in Journal of Hydroinformatics
- Vol. 23 (4) , 849-863
Open AccessApplication of gradient tree boosting regressor for the prediction of scour depth around bridge piers
Scour around bridge piers is a complex phenomenon and it is essential to assess or predict the scour hazard around bridge piers in tandem with completely understanding its mechanism. To date, there is no exact method for the estimation of scour depth. Nowadays, machine learning techniques are being recognized as effective tools for the prediction of scour depth using experimental data. In the present study, gradient tree boosting (GTB) technique was used for the prediction of scour depth around various pier shapes under different streambed conditions. Sediment size, sediment quantity, velocity, and flow time were used as input parameters to predict the scour depth under clear-water and live-bed scour conditions. The scour depth was predicted for different pier shapes such as, circular, rectangular, round-nosed and sharp-nosed shaped. The GTB model predicted scour depth values were compared with that of the group method of data handling (GMDH) technique. The performance of GTB and GMDH models were then evaluated based on statistical indices such as RRMSE, NNSE, WI, MNE, SI, and KGE. The study concludes that the GTB model performance was relatively superior to that of GMDH in the prediction of scour depth around different pier shapes.
- 27 November 2017
- Published by Taylor & Francis in Ish Journal of Hydraulic Engineering
- Vol. 24 (2) , 190-197
Estimation of dew point temperature using SVM and ELM for humid and semi-arid regions of India
The dew point temperature is the temperature at which the moisture in the air begins to condense into dew or water droplets. The accurate estimation of the dew point temperature is very important as it controls the heat stress on humans, detects fluctuations of evaporation rates, and humidity trends. The dew point temperature is a significant parameter particularly required in various hydrological, climatological and agronomical related researches. This study proposes Support Vector Machine (SVM) and Extreme Learning Machine (ELM) models for the estimation of daily dew point temperature. The daily measured weather data (Wet bulb temperature, relative humidity, vapor pressure and dew point temperature) of humid and semi-arid regions of India were used for model development. The statistical indices, namely Mean Absolute Error, Root Mean Square Error, and Nash Sutcliffe Efficiency were adopted to evaluate the performances of these two models. The merit of the ELM model is evaluated against SVM technique in the estimation of dew point temperature. The proposed ELM models demonstrated much greater capability than the SVM models in the estimation of daily dew point temperature.
- 27 November 2017
- Published by Taylor & Francis in Ish Journal of Hydraulic Engineering
- Vol. 24 (2) , 190-197
Estimation of dew point temperature using SVM and ELM for humid and semi-arid regions of India
The dew point temperature is the temperature at which the moisture in the air begins to condense into dew or water droplets. The accurate estimation of the dew point temperature is very important as it controls the heat stress on humans, detects fluctuations of evaporation rates, and humidity trends. The dew point temperature is a significant parameter particularly required in various hydrological, climatological and agronomical related researches. This study proposes Support Vector Machine (SVM) and Extreme Learning Machine (ELM) models for the estimation of daily dew point temperature. The daily measured weather data (Wet bulb temperature, relative humidity, vapor pressure and dew point temperature) of humid and semi-arid regions of India were used for model development. The statistical indices, namely Mean Absolute Error, Root Mean Square Error, and Nash Sutcliffe Efficiency were adopted to evaluate the performances of these two models. The merit of the ELM model is evaluated against SVM technique in the estimation of dew point temperature. The proposed ELM models demonstrated much greater capability than the SVM models in the estimation of daily dew point temperature.
- 8 September 2015
- Published by Springer Nature in Neural Computing and Applications
- Vol. 28 (2) , 275-285
Performance evaluation of hybrid Wavelet-ANN and Wavelet-ANFIS models for estimating evapotranspiration in arid regions of India
- 8 September 2015
- Published by Springer Nature in Neural Computing and Applications
- Vol. 28 (2) , 275-285
Performance evaluation of hybrid Wavelet-ANN and Wavelet-ANFIS models for estimating evapotranspiration in arid regions of India