Mahoto Takeda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mahoto Takeda has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Dong-Sik Bae
Changwon National University
2 shared publications Sung Kang
2 shared publicationsDong-Sik Bae
Department of Advanced Materials Engineering, Changwon National University, Changwon 641-773, Korea
1 shared publicationJ. S. Kim
Department of Materials Engineering (SEISAN)
1 shared publicationJun-Seop Kim
Department of Materials Engineering (SEISAN), Yokohama National University, Yokohama 240-8501, Japan
1 shared publicationK. Kuwada
Department of Materials Engineering (SEISAN)
1 shared publication
Latest Publications
- 16 November 2016
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 55 (12) , 123002
Microstructural evolution and magnetic properties of ultrafine solute-atom particles formed in a Cu75–Ni20–Fe5 alloy on isothermal annealing
Microstructural features strongly affect magnetism in nano-granular magnetic materials. In the present work we have investigated the relationship between the magnetic properties and the self-organized microstructure formed in a Cu75–Ni20–Fe5 alloy comprising ferromagnetic elements and copper atoms. High resolution transmission electron microscopy (HRTEM) observations showed that on isothermal annealing at 873 K, nano-scale solute (Fe,Ni)-rich clusters initially formed with a random distribution in the Cu-rich matrix. Superconducting quantum interference device (SQUID) measurements revealed that these ultrafine solute clusters exhibited super-spinglass and superparamagnetic states. On further isothermal annealing the precipitates evolved to cubic or rectangular ferromagnetic particles and aligned along the 〈100〉 directions of the copper-rich matrix. Electron energy-band calculations based on the first-principle Korringa–Kohn–Rostocker (KKR) method were also implemented to investigate both the electronic structure and the magnetic properties of the alloy. Inputting compositions obtained experimentally by scanning transmission electron microscopy–electron dispersive X-ray spectroscopy (STEM–EDS) analysis, the KKR calculation confirmed that ferromagnetic precipitates (of moment 1.07μB per atom) formed after annealing for 2 × 104 min. Magneto-thermogravimetric (MTG) analysis determined with high sensitivity the Curie temperatures and magnetic susceptibility above room temperature of samples containing nano-scale ferromagnetic particles.
- 16 November 2016
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 55 (12) , 123002
Microstructural evolution and magnetic properties of ultrafine solute-atom particles formed in a Cu75–Ni20–Fe5 alloy on isothermal annealing
Microstructural features strongly affect magnetism in nano-granular magnetic materials. In the present work we have investigated the relationship between the magnetic properties and the self-organized microstructure formed in a Cu75–Ni20–Fe5 alloy comprising ferromagnetic elements and copper atoms. High resolution transmission electron microscopy (HRTEM) observations showed that on isothermal annealing at 873 K, nano-scale solute (Fe,Ni)-rich clusters initially formed with a random distribution in the Cu-rich matrix. Superconducting quantum interference device (SQUID) measurements revealed that these ultrafine solute clusters exhibited super-spinglass and superparamagnetic states. On further isothermal annealing the precipitates evolved to cubic or rectangular ferromagnetic particles and aligned along the 〈100〉 directions of the copper-rich matrix. Electron energy-band calculations based on the first-principle Korringa–Kohn–Rostocker (KKR) method were also implemented to investigate both the electronic structure and the magnetic properties of the alloy. Inputting compositions obtained experimentally by scanning transmission electron microscopy–electron dispersive X-ray spectroscopy (STEM–EDS) analysis, the KKR calculation confirmed that ferromagnetic precipitates (of moment 1.07μB per atom) formed after annealing for 2 × 104 min. Magneto-thermogravimetric (MTG) analysis determined with high sensitivity the Curie temperatures and magnetic susceptibility above room temperature of samples containing nano-scale ferromagnetic particles.
- Open Access
- 20 October 2015
- Published by Wiley in Advances in Condensed Matter Physics
- Vol. 2015, 1-7
Precipitation Behavior and Magnetic Properties of Cu-Fe-Co Alloys Containing Nanogranular Ferromagnetic-Element Particles
This work investigates the evolution of microstructures and magnetic properties during isothermal annealing of Cu-Fe-Co alloys, using electron microscopy and superconducting quantum interference device (SQUID) magnetometry. Small coherent granular precipitates composed of iron and cobalt formed in the copper matrix in the early stage of precipitation. As annealing proceeded, the precipitates lost coherency to the matrix after reaching a size of 15–20 nm and twin-like structures were consecutively introduced in the particles. The SQUID measurements revealed that the magnetic properties of the specimens correlated with the microstructural evolution. The coercive force initially increased with annealing time but decreased after reaching a peak. Lorentz Microscopy suggested that the initial large increase of magnetization was invoked by a structural transition from fcc to B2 in the precipitates.
- 20 October 2015
- Published by Wiley in Advances in Condensed Matter Physics
- Vol. 2015, 1-7
Open AccessPrecipitation Behavior and Magnetic Properties of Cu-Fe-Co Alloys Containing Nanogranular Ferromagnetic-Element Particles
This work investigates the evolution of microstructures and magnetic properties during isothermal annealing of Cu-Fe-Co alloys, using electron microscopy and superconducting quantum interference device (SQUID) magnetometry. Small coherent granular precipitates composed of iron and cobalt formed in the copper matrix in the early stage of precipitation. As annealing proceeded, the precipitates lost coherency to the matrix after reaching a size of 15–20 nm and twin-like structures were consecutively introduced in the particles. The SQUID measurements revealed that the magnetic properties of the specimens correlated with the microstructural evolution. The coercive force initially increased with annealing time but decreased after reaching a peak. Lorentz Microscopy suggested that the initial large increase of magnetization was invoked by a structural transition from fcc to B2 in the precipitates.
- Open Access
- 1 April 2011
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 50 (4R) , 045807
Microstructure Affecting Magnetoresistance of a Cu75–Fe5–Ni20Alloy
The electromagnetic properties of a Cu75–Fe5–Ni20 alloy have been investigated upon isothermal annealing of the alloy at 873 K, using a superconducting quantum interference device (SQUID) magnetometer and a physical property measurement system (PPMS) instrument. Magnetoresistance (MR) was closely related to the magnetization value in specimens of the alloy. The most striking finding of the present work is that the as-quenched specimen with no visible precipitates attains the largest MR (∼16% at H=7 T and T=10 K), although fine precipitates with a proper size were thought to be essential in our previous studies. The present investigation also revealed that several significant effects accompanied the magnetic and magnetoresistive properties, with microstructural evolution occurring during the phase decomposition of a Cu75–Fe5–Ni20 alloy.
- 1 April 2011
- Published by IOP Publishing in Japanese Journal of Applied Physics
- Vol. 50 (4R) , 045807
Open AccessMicrostructure Affecting Magnetoresistance of a Cu75–Fe5–Ni20Alloy
The electromagnetic properties of a Cu75–Fe5–Ni20 alloy have been investigated upon isothermal annealing of the alloy at 873 K, using a superconducting quantum interference device (SQUID) magnetometer and a physical property measurement system (PPMS) instrument. Magnetoresistance (MR) was closely related to the magnetization value in specimens of the alloy. The most striking finding of the present work is that the as-quenched specimen with no visible precipitates attains the largest MR (∼16% at H=7 T and T=10 K), although fine precipitates with a proper size were thought to be essential in our previous studies. The present investigation also revealed that several significant effects accompanied the magnetic and magnetoresistive properties, with microstructural evolution occurring during the phase decomposition of a Cu75–Fe5–Ni20 alloy.
- 30 April 2010
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 496 (1-2) , 196-201
Linear arrangement of nano-scale magnetic particles formed in Cu–Fe–Ni alloys
- 30 April 2010
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 496 (1-2) , 196-201
Linear arrangement of nano-scale magnetic particles formed in Cu–Fe–Ni alloys