Yi Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Yi Zhou has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
Zhiqing Zou
7 shared publicationsHui Yang
6 shared publications- Hui Yang
Shanghai Advanced Research Institute, Chinese Academy of Sciences
5 shared publications Daniel L. Akins
CASI, The City College of The City University of New York, New York, New York 10031, United States
3 shared publicationsJingjing Jiang
3 shared publicationsJun Li
3 shared publications
Latest Publications
- 1 May 2021
- Published by Elsevier in Electrochimica Acta
- Vol. 379, 138153
Electricity generation from salinity gradient to remove chromium using reverse electrodialysis coupled with electrocoagulation
- 1 May 2021
- Published by Elsevier in Electrochimica Acta
- Vol. 379, 138153
Electricity generation from salinity gradient to remove chromium using reverse electrodialysis coupled with electrocoagulation
- 1 November 2017
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 42 (45) , 27657-27665
A green, cheap, high-performance carbonaceous catalyst derived from Chlorella pyrenoidosa for oxygen reduction reaction in microbial fuel cells
- 1 November 2017
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 42 (45) , 27657-27665
A green, cheap, high-performance carbonaceous catalyst derived from Chlorella pyrenoidosa for oxygen reduction reaction in microbial fuel cells
- 1 October 2017
- Published by Elsevier in Electrochimica Acta
- Vol. 252, 541-548
An ordered structured cathode based on vertically aligned Pt nanotubes for ultra-low Pt loading passive direct methanol fuel cells
- 1 October 2017
- Published by Elsevier in Electrochimica Acta
- Vol. 252, 541-548
An ordered structured cathode based on vertically aligned Pt nanotubes for ultra-low Pt loading passive direct methanol fuel cells
- Open Access
- 21 February 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (20) , 12329-12335
High performance MWCNT–Pt nanocomposite-based cathode for passive direct methanol fuel cells
Reduction of the Pt loading required in cathodes is crucial for the development of passive direct methanol fuel cells (DMFCs). Herein, a novel membrane electrode assembly (MEA) that utilizes a MWCNT–Pt nanocomposite cathodic catalyst layer (CCL) with a 3D network structure is shown to require significantly less Pt loading. With a CCL Pt loading of 0.5 mg cm−2, the maximum power density of the prepared DMFC is 19.2 ± 0.4 mW cm−2 using 2.0 M methanol solution at 25 ± 1 °C, which is higher than that of the power density by a conventional MEA with twice the Pt loading (1.0 mg cm−2). Electrochemical tests show that the structure of the CCL decreases the charge transfer resistance of the cathode reaction and greatly increases the cathode catalyst utilization in comparison with the conventional MEA. The enhanced MEA performance is attributed to the discontinuous distributions of the Pt MWCNT structures and the formation of a cross-twined network within the CCL. This study could provide a promising way to reduce the cost of future commercialized DMFCs.
- 21 February 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (20) , 12329-12335
Open AccessHigh performance MWCNT–Pt nanocomposite-based cathode for passive direct methanol fuel cells
Reduction of the Pt loading required in cathodes is crucial for the development of passive direct methanol fuel cells (DMFCs). Herein, a novel membrane electrode assembly (MEA) that utilizes a MWCNT–Pt nanocomposite cathodic catalyst layer (CCL) with a 3D network structure is shown to require significantly less Pt loading. With a CCL Pt loading of 0.5 mg cm−2, the maximum power density of the prepared DMFC is 19.2 ± 0.4 mW cm−2 using 2.0 M methanol solution at 25 ± 1 °C, which is higher than that of the power density by a conventional MEA with twice the Pt loading (1.0 mg cm−2). Electrochemical tests show that the structure of the CCL decreases the charge transfer resistance of the cathode reaction and greatly increases the cathode catalyst utilization in comparison with the conventional MEA. The enhanced MEA performance is attributed to the discontinuous distributions of the Pt MWCNT structures and the formation of a cross-twined network within the CCL. This study could provide a promising way to reduce the cost of future commercialized DMFCs.
- 1 July 2016
- Published by Elsevier in Chinese Journal of Catalysis
- Vol. 37 (7) , 1089-1095
Controllable fabrication of ordered Pt nanorod array as catalytic electrode for passive direct methanol fuel cells
- 1 July 2016
- Published by Elsevier in Chinese Journal of Catalysis
- Vol. 37 (7) , 1089-1095
Controllable fabrication of ordered Pt nanorod array as catalytic electrode for passive direct methanol fuel cells
- 29 August 2015
- Published by Tsinghua University Press in Nano Research
- Vol. 8 (8) , 2777-2788
Conversion of PtNi alloy from disordered to ordered for enhanced activity and durability in methanol-tolerant oxygen reduction reactions
The development of cost-effective oxygen reduction reaction (ORR) catalysts with a high methanol tolerance and enhanced durability is highly desirable for direct methanol fuel cells. This work focuses on the conversion of PtNi nanoparticles from a disordered solid solution to an ordered intermetallic compound. Here the effect of this conversion on ORR activity, durability, and methanol tolerance are characterized. X-ray diffraction and transmission electron microscopy results confirm the formation of ordered PtNi intermetallic nanoparticles with high dispersion and a mean particle size of about 7.6 nm. The PtNi intermetallic nanoparticles exhibited enhanced mass and specific activities toward the methanol-tolerant ORR in pure and methanol-containing electrolytes. The specific activity of the ORR at 0.85 V on the PtNi intermetallic nanoparticles is almost 6 times greater than on commercial Pt/C and 3 times greater than on disordered PtNi alloy. Durability tests indicated a minimal loss of ORR activity for PtNi intermetallic nanoparticles after 5,000 potential cycles, whereas the ORR activity decreased by 28% for disordered PtNi alloy. The enhanced methanoltolerant ORR activity and durability may be attributed to the structural and compositional stabilities of the ordered PtNi intermetallic nanoparticles compared relative to the stabilities of the disordered PtNi alloy, strongly suggesting that the PtNi intermetallic nanoparticles may serve as highly active and durable methanol-tolerant ORR electrocatalysts for practical applications.
- 29 August 2015
- Published by Tsinghua University Press in Nano Research
- Vol. 8 (8) , 2777-2788
Conversion of PtNi alloy from disordered to ordered for enhanced activity and durability in methanol-tolerant oxygen reduction reactions
The development of cost-effective oxygen reduction reaction (ORR) catalysts with a high methanol tolerance and enhanced durability is highly desirable for direct methanol fuel cells. This work focuses on the conversion of PtNi nanoparticles from a disordered solid solution to an ordered intermetallic compound. Here the effect of this conversion on ORR activity, durability, and methanol tolerance are characterized. X-ray diffraction and transmission electron microscopy results confirm the formation of ordered PtNi intermetallic nanoparticles with high dispersion and a mean particle size of about 7.6 nm. The PtNi intermetallic nanoparticles exhibited enhanced mass and specific activities toward the methanol-tolerant ORR in pure and methanol-containing electrolytes. The specific activity of the ORR at 0.85 V on the PtNi intermetallic nanoparticles is almost 6 times greater than on commercial Pt/C and 3 times greater than on disordered PtNi alloy. Durability tests indicated a minimal loss of ORR activity for PtNi intermetallic nanoparticles after 5,000 potential cycles, whereas the ORR activity decreased by 28% for disordered PtNi alloy. The enhanced methanoltolerant ORR activity and durability may be attributed to the structural and compositional stabilities of the ordered PtNi intermetallic nanoparticles compared relative to the stabilities of the disordered PtNi alloy, strongly suggesting that the PtNi intermetallic nanoparticles may serve as highly active and durable methanol-tolerant ORR electrocatalysts for practical applications.
- 12 June 2015
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 3 (29) , 15177-15183
Shape-controlled porous heterogeneous PtRu/C/Nafion microspheres enabling high performance direct methanol fuel cells
An anode catalytic layer for direct methanol fuel cells (DMFCs) with decreased PtRu loading as low as 1.0 mg cm−2 has been prepared by an electrospray method. The morphology of the electrosprayed composite of PtRu/C/Nafion/polyethylene oxide (PEO) is altered from irregular particles to porous microspheres and to nanofibers by adjusting the PEO content. A hybrid structure is assembled using the porous microspheres as the anode catalytic layer for DMFCs, leading to a remarkable enhancement in the maximum power density of 35.4 mW cm−2, which is ∼50% higher than that of the conventional one at the same PtRu loading of 1.0 mg cm−2 and is even comparable to that (31.5 mW cm−2) of the conventional one at a higher PtRu loading of 2.0 mg cm−2. Further investigation reveals that the improved performance is mainly attributed to its hierarchical factual structure. In the primary structure, a single microsphere is with well-distributed PtRu/C and is fully rich in nano-pores and nano-channels, resulting in an increase in the electrochemical active surface area and higher catalyst utilization. In the secondary structure, micro-sized pathways are formed by the stereoscopic microspheres, resulting in enhanced mass transport, higher current density and power density.
- 12 June 2015
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 3 (29) , 15177-15183
Shape-controlled porous heterogeneous PtRu/C/Nafion microspheres enabling high performance direct methanol fuel cells
An anode catalytic layer for direct methanol fuel cells (DMFCs) with decreased PtRu loading as low as 1.0 mg cm−2 has been prepared by an electrospray method. The morphology of the electrosprayed composite of PtRu/C/Nafion/polyethylene oxide (PEO) is altered from irregular particles to porous microspheres and to nanofibers by adjusting the PEO content. A hybrid structure is assembled using the porous microspheres as the anode catalytic layer for DMFCs, leading to a remarkable enhancement in the maximum power density of 35.4 mW cm−2, which is ∼50% higher than that of the conventional one at the same PtRu loading of 1.0 mg cm−2 and is even comparable to that (31.5 mW cm−2) of the conventional one at a higher PtRu loading of 2.0 mg cm−2. Further investigation reveals that the improved performance is mainly attributed to its hierarchical factual structure. In the primary structure, a single microsphere is with well-distributed PtRu/C and is fully rich in nano-pores and nano-channels, resulting in an increase in the electrochemical active surface area and higher catalyst utilization. In the secondary structure, micro-sized pathways are formed by the stereoscopic microspheres, resulting in enhanced mass transport, higher current density and power density.
- 1 June 2015
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 40 (20) , 6647-6654
Fabrication of nano-network structure anode by zinc oxide nanorods template for passive direct methanol fuel cells
- 1 June 2015
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 40 (20) , 6647-6654
Fabrication of nano-network structure anode by zinc oxide nanorods template for passive direct methanol fuel cells
- 3 July 2014
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 6 (18) , 10686-10692
Structural transformation of carbon-supported Pt3Cr nanoparticles from a disordered to an ordered phase as a durable oxygen reduction electrocatalyst
The sluggish oxygen reduction kinetics and insufficient durability of cathode catalysts restrict the practical application of proton exchange membrane fuel cells. This study focuses on the structural transformation of carbon-supported Pt3Cr from a disordered to an ordered phase and on the effect of such structural transformation on oxygen reduction reaction (ORR) activity and durability. X-ray diffraction and transmission electron microscopy results confirm the formation of carbon-supported Pt3Cr intermetallic nanoparticles with a mean particle size of ca. 7.2 nm. Line scanning EDX reveals that the practical Pt–Cr atomic ratio is approximately 3 : 1. X-ray photoelectron spectroscopy results indicate that the proportion of metallic Pt increases while the binding energy of Pt 4f decreases with such structural transformation. The Pt3Cr/C intermetallic nanoparticles exhibit enhanced mass and specific activities toward the ORR compared with commercial Pt/C but slightly lower mass activity than the disordered Pt3Cr/C alloy nanoparticles. After the accelerated durability test for 5000 cycles, the Pt3Cr intermetallic nanoparticles displayed negligible decay in ORR mass activity; however the ORR mass activity on the isordered Pt3Cr alloy decreases to ca. 50%. Much enhanced durability of the Pt3Cr/C intermetallic nanoparticles toward the ORR is definitely caused by the much higher structural and compositional stabilities of the Pt3Cr/C intermetallic nanoparticles than that of the disordered Pt3Cr/C alloy nanoparticles, suggesting that the Pt3Cr intermetallic nanoparticles may serve as highly active and durable ORR electrocatalysts for practical application.
- 3 July 2014
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 6 (18) , 10686-10692
Structural transformation of carbon-supported Pt3Cr nanoparticles from a disordered to an ordered phase as a durable oxygen reduction electrocatalyst
The sluggish oxygen reduction kinetics and insufficient durability of cathode catalysts restrict the practical application of proton exchange membrane fuel cells. This study focuses on the structural transformation of carbon-supported Pt3Cr from a disordered to an ordered phase and on the effect of such structural transformation on oxygen reduction reaction (ORR) activity and durability. X-ray diffraction and transmission electron microscopy results confirm the formation of carbon-supported Pt3Cr intermetallic nanoparticles with a mean particle size of ca. 7.2 nm. Line scanning EDX reveals that the practical Pt–Cr atomic ratio is approximately 3 : 1. X-ray photoelectron spectroscopy results indicate that the proportion of metallic Pt increases while the binding energy of Pt 4f decreases with such structural transformation. The Pt3Cr/C intermetallic nanoparticles exhibit enhanced mass and specific activities toward the ORR compared with commercial Pt/C but slightly lower mass activity than the disordered Pt3Cr/C alloy nanoparticles. After the accelerated durability test for 5000 cycles, the Pt3Cr intermetallic nanoparticles displayed negligible decay in ORR mass activity; however the ORR mass activity on the isordered Pt3Cr alloy decreases to ca. 50%. Much enhanced durability of the Pt3Cr/C intermetallic nanoparticles toward the ORR is definitely caused by the much higher structural and compositional stabilities of the Pt3Cr/C intermetallic nanoparticles than that of the disordered Pt3Cr/C alloy nanoparticles, suggesting that the Pt3Cr intermetallic nanoparticles may serve as highly active and durable ORR electrocatalysts for practical application.
- 5 June 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 118 (24) , 12669-12675
Controllable Modification of the Electronic Structure of Carbon-Supported Core–Shell Cu@Pd Catalysts for Formic Acid Oxidation
- 5 June 2014
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 118 (24) , 12669-12675
Controllable Modification of the Electronic Structure of Carbon-Supported Core–Shell Cu@Pd Catalysts for Formic Acid Oxidation