MFMarco Favaretti

Marco Favaretti

*This is an algorithmically generated author record based on publicly available information.

Marco Favaretti has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • RELIABILITY OF GUELPH PERMEAMETER FOR DETERMINING THE LINERS HYDRAULIC CONDUCTIVITY

    by Giampaolo Cortellazzo, Francesco Benedetti, Stefano Busana, Marco Favaretti

    The aim of this study is to evaluate whether the Guelph permeameter can be effectively used as a quick and reliable instrument to measure the hydraulic conductivity of compacted mineral liners. The investigation was carried out on two distinct areas of the final capping of a municipal solid waste landfill in Italy. On the first test site, hydraulic conductivity tests were performed using the Guelph permeameter, assessing reliability and repeatability of test results. On the second one, many undisturbed soil samples were taken and tested in the laboratory using a modified oedometric apparatus as a falling-head permeameter. Further hydraulic conductivity tests with Guelph permeameter were also performed in the holes made by soil sampling. The campaign was integrated with in situ density tests using the calibrated sand method, to check the uniformity of the compaction degree of liners. A final comparison between hydraulic conductivity obtained in situ and in the laboratory was proposed and critically analysed. The experiments performed on the two test sites with the Guelph permeameter and their statistical processing demonstrate that the instrument is not only economical and easy to use, but also reliable if used with appropriate precautions.

  • Field trial of a reinforced landfill cover system: performance and failure

    by Giampaolo Cortellazzo, Luis E. Russo, Stefano Busana, Laura Carbone, Marco Favaretti, Hartmut Hangen


  • Open Access

    Experimental Acceptance Procedure for Using Cullet in the Gas Collection Layer of MSW Landfill

    by Giampaolo Cortellazzo, Eugenio Bellò, Stefano Busana, Marco Favaretti

    The multilayer system of a non-hazardous solid wastes landfill cover, required by most international regulations, includes a granular layer of adequate permeability and thickness for the collection and drainage of biogas. The choice of the most suitable material generally falls on granular soils, containing very low percentages of fines. The paper presents the possibility of replacing natural soils with cullet, obtained by the glass shredding, and widely available on the market. Its hydraulic conductivity with regard to biogas and its granulometric compatibility with the adjacent layers may be initially assessed by means of the usual filter design criteria. Then, its crushing strength, under static and cyclical loads, must be evaluated, since the capping systems are crossed by heavy earthmoving trucks, and consequently, there is the possibility of a change of the cullet granulometric distribution. As cullet is not a conventional material, the usual geotechnical laboratory tests cannot be directly applied to it. The paper suggests an innovative laboratory procedure, defined as a static and cyclical punching test, which allows to evaluate the crushing resistance of cullet by using the traditional apparatus for soil compaction.


  • Open Access

    A New Approach for the Design, Construction and Control of Compacted Mineral Liners of a MSW Landfill Capping

    by G. Cortellazzo, M. C. Mandaglio, S. Busana, M. Favaretti, N. Moraci

    Design parameters typically used for the mineral liner of landfill cover system (e.g. water contentw, dry densityρdand hydraulic conductivityk) are often difficult to obtain on site. After construction, these experimental parameters need to be checked against the predicted values. In this paper, a rigorous procedure for design, construction and control of a compacted mineral liner in a capping multilayer system has been developed. The procedure has been schematically subdivided in three phases. The first phase (design) was based on a wide preliminary set of laboratory tests, composed of classification, compaction and permeability tests. An analytical relationship among degree of saturationSr, dry densityρdand hydraulic conductivitykis also defined. The second phase (construction) was developed through a suitable compaction of the mineral liner planned after the design phase. The last phase (in-site control) consists of checking the design parameters (w,Sr,ρd,k) actually achieved on site. A comparison between coefficientsk, obtained through site permeability tests and an analytical relationship obtained in the design phase, was made successfully. Owing to this new approach, it will no longer be necessary to perform in situ permeability tests, but it will be enough to define the above-mentioned analytical relationship during the design phase. In this way, a dangerous damage to the mineral liner, caused by the execution of invasive permeability tests, will be also avoided.

  • Open Access

    Design and construction of a compacted clay liner in cover system of a municipal solid waste (MSW) landfill using nonstandard procedures

    by Nicola Moraci Moraci, Stefano Busana, Giampaolo Cortellazzo, Marco Favaretti, Maria Clorinda Mandaglio, Micol Schepis

    Design and construction of a mineral barrier layer involve many experimental and technological aspects. A specific soil water content and laboratory compaction energy, which are required to obtain permeability values according to the national regulation in force, must be determined. It is also necessary to control water content, compaction energy, and permeability of the liner actually compacted in situ. This paper shows how a compacted mineral barrier mainly composed of silty clay soil (the excavated soil is a natural but potentially re-usable waste product) was put in place to cover a large municipal solid waste (MSW) landfill and compacted using a heavy dumper, capable of achieving an adequate compaction degree. The in situ hydraulic properties of the liner were compared with those obtained by laboratory testing and to the limits imposed by the Italian regulation. The actual compaction degree was checked by in situ tests. Hydraulic conductivity tests were carried out in situ, using Boutwell and Guelph permeameters, and in the laboratory using rigid wall and flexible wall permeameters. In situ testing provided more realistic permeability values than laboratory ones and demonstrated that the actual construction procedure used was effective to obtain the design targets.