Hiram E. Martinez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hiram E. Martinez has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Ismael Cosme
National Institute of Astrophysics, Optics and Electronics (INAOE), Luis Enrique Erro #1, Tonantzintla 72840, Puebla, Mexico
3 shared publications - Svetlana Mansurova
Instituto Nacional de Astrofísica, Óptica y Electrónica (INAOE), Luis Enrique Erro 1, Puebla 72840, CP, Mexico
3 shared publications - Andrey Kosarev
INAOE, Electronics, Luis Enrique Erro No.1, Sta. Maria tonanzintla, Puebla, 72000, Mexico, 52 222 2663 100 Ext. 1409
2 shared publications - Antonio J. Olivares
National Institute of Astrophysics, Optics and Electronics (INAOE), Luis Enrique Erro # 1, Tonantzintla, Puebla, C.P. 72840, Mexico
2 shared publications - Adrian Itzmoyotl
National Institute of Astrophysics, Optics and Electronics (INAOE), Luis Enrique Erro # 1, Tonantzintla, Puebla, C.P. 72840, Mexico
1 shared publication - Carlos Ospina
National Institute for Astrophysics, Optics, and Electronics (INAOE), Puebla 72840, Mexico
1 shared publication
Latest Publications
- Open Access
Study of Si and Ge Atoms Termination Using H-Dilution in SiGe:H Alloys Deposited by Radio Frequency (13.56 MHz) Plasma Discharge at Low Temperature
In this work, we present the study of the atomic composition in amorphous SiXGeY:HZ films deposited by radio frequency (RF—13.56 MHz) plasma discharge at low deposition temperature. A study and control of Si and Ge atoms termination using H-dilution in SiGe:H alloys deposited by RF plasma discharge was conducted and we made a comparison with low-frequency plasma discharge studies. Solid contents of the main elements and contaminants were determined by SIMS technique. It was found that for low dilution rates from RH = 9 to 30, the germanium content in the solid phase strongly depends on the hydrogen dilution and varies from Y = 0.49 to 0.68. On the other hand, with a higher presence of hydrogen in the mixture, the germanium content does not change and remains close to the value of Y = 0.69. The coefficient of Ge preferential incorporation depended on RH and varied from PGe = 0.8 to 4.3. Also, the termination of Si and Ge atoms with hydrogen was studied using FTIR spectroscopy. Preferential termination of Si atoms was observed in the films deposited with low RH < 20, while preferential termination of Ge atoms was found in the films deposited with high RH > 40. In the range of 20 < RH < 40, hydrogen created chemical bonds with both Si and Ge atoms without preference.
Open AccessStudy of Si and Ge Atoms Termination Using H-Dilution in SiGe:H Alloys Deposited by Radio Frequency (13.56 MHz) Plasma Discharge at Low Temperature
In this work, we present the study of the atomic composition in amorphous SiXGeY:HZ films deposited by radio frequency (RF—13.56 MHz) plasma discharge at low deposition temperature. A study and control of Si and Ge atoms termination using H-dilution in SiGe:H alloys deposited by RF plasma discharge was conducted and we made a comparison with low-frequency plasma discharge studies. Solid contents of the main elements and contaminants were determined by SIMS technique. It was found that for low dilution rates from RH = 9 to 30, the germanium content in the solid phase strongly depends on the hydrogen dilution and varies from Y = 0.49 to 0.68. On the other hand, with a higher presence of hydrogen in the mixture, the germanium content does not change and remains close to the value of Y = 0.69. The coefficient of Ge preferential incorporation depended on RH and varied from PGe = 0.8 to 4.3. Also, the termination of Si and Ge atoms with hydrogen was studied using FTIR spectroscopy. Preferential termination of Si atoms was observed in the films deposited with low RH < 20, while preferential termination of Ge atoms was found in the films deposited with high RH > 40. In the range of 20 < RH < 40, hydrogen created chemical bonds with both Si and Ge atoms without preference.
- Open Access
Nanostructural Modification of PEDOT:PSS for High Charge Carrier Collection in Hybrid Frontal Interface of Solar Cells
In this work, we propose poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) material to form a hybrid heterojunction with amorphous silicon-based materials for high charge carrier collection at the frontal interface of solar cells. The nanostructural characteristics of PEDOT:PSS layers were modified using post-treatment techniques via isopropyl alcohol (IPA). Atomic force microscopy (AFM), Fourier-transform infrared (FTIR), and Raman spectroscopy demonstrated conformational changes and nanostructural reorganization in the surface of the polymer in order to tailor hybrid interface to be used in the heterojunctions of inorganic solar cells. To prove this concept, hybrid polymer/amorphous silicon solar cells were fabricated. The hybrid PEDOT:PSS/buffer/a-Si:H heterojunction demonstrated high transmittance, reduction of electron diffusion, and enhancement of the internal electric field. Although the structure was a planar superstrate-type configuration and the PEDOT:PSS layer was exposed to glow discharge, the hybrid solar cell reached high efficiency compared to that in similar hybrid solar cells with substrate-type configuration and that in textured well-optimized amorphous silicon solar cells fabricated at low temperature. Thus, we demonstrate that PEDOT:PSS is fully tailored and compatible material with plasma processes and can be a substitute for inorganic p-type layers in inorganic solar cells and related devices with improvement of performance and simplification of fabrication process.
Open AccessNanostructural Modification of PEDOT:PSS for High Charge Carrier Collection in Hybrid Frontal Interface of Solar Cells
In this work, we propose poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) material to form a hybrid heterojunction with amorphous silicon-based materials for high charge carrier collection at the frontal interface of solar cells. The nanostructural characteristics of PEDOT:PSS layers were modified using post-treatment techniques via isopropyl alcohol (IPA). Atomic force microscopy (AFM), Fourier-transform infrared (FTIR), and Raman spectroscopy demonstrated conformational changes and nanostructural reorganization in the surface of the polymer in order to tailor hybrid interface to be used in the heterojunctions of inorganic solar cells. To prove this concept, hybrid polymer/amorphous silicon solar cells were fabricated. The hybrid PEDOT:PSS/buffer/a-Si:H heterojunction demonstrated high transmittance, reduction of electron diffusion, and enhancement of the internal electric field. Although the structure was a planar superstrate-type configuration and the PEDOT:PSS layer was exposed to glow discharge, the hybrid solar cell reached high efficiency compared to that in similar hybrid solar cells with substrate-type configuration and that in textured well-optimized amorphous silicon solar cells fabricated at low temperature. Thus, we demonstrate that PEDOT:PSS is fully tailored and compatible material with plasma processes and can be a substitute for inorganic p-type layers in inorganic solar cells and related devices with improvement of performance and simplification of fabrication process.
- Open Access
AZO/PEDOT:PSS Polymer Frontal Interface Deposited on Flexible Substrates for a-Si:H Photovoltaic Applications
Thin-film hybrid organic-inorganic photovoltaic structures based on hydrogenated silicon (Si:H), poly(3,4ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) polymer Al-doped ZnO (AZO) films deposited on different types of flexible substrates have been fabricated and investigated. The compatibility of the polymer and inorganic materials regimes and deposition techniques used for device fabrication has been demonstrated on flexible substrates. Morphological characteristics of transparent Al-doped ZnO (AZO) films deposited on substrates have been measured by atomic force microscopy. Electronic characteristics of the fabricated photovoltaic structures have been measured and analyzed for different thicknesses of the transparent electrodes and different substrate types. Photovoltaic hybrid structure on polyethylene naphthalate (PEN) substrate showed the best characteristics: short circuit current density Jsc = 9.79 mA/cm2, open circuit voltage Uoc = 565 mV, and PCE η = 1.3%. To analyze the mechanisms governing the device performance, short circuit current density spectral dependence of the devices fabricated on different types of flexible substrates has been measured. As demonstrated by our analysis, the structures on PEN substrates, besides better substrate transmittance, also show better junction properties.
Open AccessAZO/PEDOT:PSS Polymer Frontal Interface Deposited on Flexible Substrates for a-Si:H Photovoltaic Applications
Thin-film hybrid organic-inorganic photovoltaic structures based on hydrogenated silicon (Si:H), poly(3,4ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) polymer Al-doped ZnO (AZO) films deposited on different types of flexible substrates have been fabricated and investigated. The compatibility of the polymer and inorganic materials regimes and deposition techniques used for device fabrication has been demonstrated on flexible substrates. Morphological characteristics of transparent Al-doped ZnO (AZO) films deposited on substrates have been measured by atomic force microscopy. Electronic characteristics of the fabricated photovoltaic structures have been measured and analyzed for different thicknesses of the transparent electrodes and different substrate types. Photovoltaic hybrid structure on polyethylene naphthalate (PEN) substrate showed the best characteristics: short circuit current density Jsc = 9.79 mA/cm2, open circuit voltage Uoc = 565 mV, and PCE η = 1.3%. To analyze the mechanisms governing the device performance, short circuit current density spectral dependence of the devices fabricated on different types of flexible substrates has been measured. As demonstrated by our analysis, the structures on PEN substrates, besides better substrate transmittance, also show better junction properties.