Machavaram Venkata Kartikeyan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Machavaram Venkata Kartikeyan has a total of 178 co-authors. Here are the top co-authors by number of shared publications:
M. Thumm
Karlsruhe Institute of Technology, Ass. EURATOM-KIT, IHM, Kaiserstr. 12, 76131, Germany
19 shared publications- Jagannath Malik
Department of Electrical Engineering, Indian Institute of Technology Patna, Patna, India
16 shared publications E. Borie
Dept. Electronics and Computer Engineering, Indian Institute of Technology, Roorkee-247667, India
14 shared publications- Manfred Thumm
Institute for Pulsed Power and Microwave Technology (IHM), Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany
13 shared publications - Sivasubramanian Yuvaraj
Department of Electronics and Communication Engineering, Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram, India
13 shared publications - E. Borie
Bau 421, Forschungszentrum Karlsruhe (FZK)
10 shared publications
Latest Publications
- 24 August 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (8)
Unloaded wires-based simple biasing circuit for varactor-controlled metasurfaces
This paper introduces a varactor-loaded reconfigurable metasurface designed for discrete beam steering, a feature crucial for many applications such as smart radio environments. Initially, MATLAB is used to determine the meta-atom impedances that yield the desired reflection under normal incidence. Subsequently, capacitive-type meta-atoms are employed to achieve these impedances, which are then replaced with varactor diodes to create the reconfigurable metasurface. The unloaded wires are deliberately integrated into the same plane as the capacitively loaded meta-atoms to serve as biasing wires, allowing for changes in the capacitance of varactor diodes. This approach simplifies the design by eliminating the need for additional substrates for biasing circuitry. The proposed technique is tested on a two-bit reflective metasurface at 10 GHz and demonstrates promising beam- steering performance. The simulated results are confirmed by fabricating and testing the metasurface at different reflection angles.
- 24 August 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (8)
Unloaded wires-based simple biasing circuit for varactor-controlled metasurfaces
This paper introduces a varactor-loaded reconfigurable metasurface designed for discrete beam steering, a feature crucial for many applications such as smart radio environments. Initially, MATLAB is used to determine the meta-atom impedances that yield the desired reflection under normal incidence. Subsequently, capacitive-type meta-atoms are employed to achieve these impedances, which are then replaced with varactor diodes to create the reconfigurable metasurface. The unloaded wires are deliberately integrated into the same plane as the capacitively loaded meta-atoms to serve as biasing wires, allowing for changes in the capacitance of varactor diodes. This approach simplifies the design by eliminating the need for additional substrates for biasing circuitry. The proposed technique is tested on a two-bit reflective metasurface at 10 GHz and demonstrates promising beam- steering performance. The simulated results are confirmed by fabricating and testing the metasurface at different reflection angles.
- 5 May 2026
- Published by Taylor & Francis in IETE Technical Review
- Vol. 43 (4) , 1-12
Tailored Bandwidth Filtering Power Divider Using Off-Resonance LC-Resonator Loaded Compact Artificial Transmission Line
1. Modern radar and electronic warfare systems require high-performance receivers with a broad dynamic range and a high RF input handling capability to ensure reliable target detection and minimize...
- 5 May 2026
- Published by Taylor & Francis in IETE Technical Review
- Vol. 43 (4) , 1-12
Tailored Bandwidth Filtering Power Divider Using Off-Resonance LC-Resonator Loaded Compact Artificial Transmission Line
1. Modern radar and electronic warfare systems require high-performance receivers with a broad dynamic range and a high RF input handling capability to ensure reliable target detection and minimize...
- 22 September 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 222
Cavity design and interaction computation of a tri-frequency 42-85-94 GHz gyrotron
- 22 September 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 222
Cavity design and interaction computation of a tri-frequency 42-85-94 GHz gyrotron
- 5 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (10) , 2913-2919
Advanced Design Studies of Key Components for a Triple-Frequency 42-/84-/95-GHz Gyrotron Output System
This article presents the design, simulation, and optimization of the key components of an advanced output system for a triple-frequency gyrotron operating at 42 GHz (TE ${}_{\textbf {6,2}}$ ), 84 GHz (TE ${}_{\textbf {10,4}}$ ), and 95 GHz (TE ${}_{\textbf {12,4}}$ ). The gyrotron generates the output power up to 200 kW at the desired frequencies with efficiency exceeding 40%, suitable for various applications in thermonuclear fusion reactors, including plasma start-up, current drive, and RF heating. Key components include a nonlinear taper (NLT), a quasi-optical launcher (QOL), a sapphire Brewster window, and a matching optics unit (MOU). The geometry of these components is optimized using the in-house tool package Gyrotron Design Studio (GDS V. 2024). In addition, commercial packages, Launcher Optimization Tool (LOT) and Surf3D, are used for designing QOL. Gaussian mode content factors of the output beams from the launcher are greater than 98% for all frequencies. The sapphire Brewster window enhances beam transport efficiency, while the MOU, featuring two beam-shaping mirrors, ensures optimal beam quality and effective coupling of the Gaussian beam to the corrugated waveguide. This study demonstrates the successful application of advanced design and optimization methods, using both proprietary and commercial simulation tools to achieve a high-performance output system for the triple-frequency gyrotron.
- 5 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 53 (10) , 2913-2919
Advanced Design Studies of Key Components for a Triple-Frequency 42-/84-/95-GHz Gyrotron Output System
This article presents the design, simulation, and optimization of the key components of an advanced output system for a triple-frequency gyrotron operating at 42 GHz (TE ${}_{\textbf {6,2}}$ ), 84 GHz (TE ${}_{\textbf {10,4}}$ ), and 95 GHz (TE ${}_{\textbf {12,4}}$ ). The gyrotron generates the output power up to 200 kW at the desired frequencies with efficiency exceeding 40%, suitable for various applications in thermonuclear fusion reactors, including plasma start-up, current drive, and RF heating. Key components include a nonlinear taper (NLT), a quasi-optical launcher (QOL), a sapphire Brewster window, and a matching optics unit (MOU). The geometry of these components is optimized using the in-house tool package Gyrotron Design Studio (GDS V. 2024). In addition, commercial packages, Launcher Optimization Tool (LOT) and Surf3D, are used for designing QOL. Gaussian mode content factors of the output beams from the launcher are greater than 98% for all frequencies. The sapphire Brewster window enhances beam transport efficiency, while the MOU, featuring two beam-shaping mirrors, ensures optimal beam quality and effective coupling of the Gaussian beam to the corrugated waveguide. This study demonstrates the successful application of advanced design and optimization methods, using both proprietary and commercial simulation tools to achieve a high-performance output system for the triple-frequency gyrotron.
- 22 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Letters on Electromagnetic Compatibility Practice and Applications
- Vol. 7 (3) , 68-72
Top-Loaded Circular Patch Log-Periodic Antenna for IEMI Sensing
This paper presents the top-loaded circular patch planar log periodic dipole array (PLPDA) antenna for detecting intentional electromagnetic interference (IEMI) within the 0.5 GHz to 2.0 GHz operating band. The dipoles of the traditional log periodic antenna have been modified using circular patches and achieved a compact design with dimensions of 25.5× 27×0.16 cm3. The modified designfs dimensions are 31.65 % and 15 % lower compared to conventional planar LPDA antenna along lateral and horizontal directions, respectively. Even with a compact size, the presented antenna gives good impedance matching with reflection coefficient |S11| less than -10 dB, a gain of 5±1 dB, 70 % radiation efficiency, and a stable radiation pattern with low cross polarizations. Considering such high performance with a compact size, the proposed antenna is well-suited for system-level integration as a non-powered passive sensor to detect the IEMI signals. At the end of the paper, the experiments relating to IEMI detection and their results are discussed to explain how
- 22 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Letters on Electromagnetic Compatibility Practice and Applications
- Vol. 7 (3) , 68-72
Top-Loaded Circular Patch Log-Periodic Antenna for IEMI Sensing
This paper presents the top-loaded circular patch planar log periodic dipole array (PLPDA) antenna for detecting intentional electromagnetic interference (IEMI) within the 0.5 GHz to 2.0 GHz operating band. The dipoles of the traditional log periodic antenna have been modified using circular patches and achieved a compact design with dimensions of 25.5× 27×0.16 cm3. The modified designfs dimensions are 31.65 % and 15 % lower compared to conventional planar LPDA antenna along lateral and horizontal directions, respectively. Even with a compact size, the presented antenna gives good impedance matching with reflection coefficient |S11| less than -10 dB, a gain of 5±1 dB, 70 % radiation efficiency, and a stable radiation pattern with low cross polarizations. Considering such high performance with a compact size, the proposed antenna is well-suited for system-level integration as a non-powered passive sensor to detect the IEMI signals. At the end of the paper, the experiments relating to IEMI detection and their results are discussed to explain how
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (5) , 1072-1080
An Innovative H-Plane Filtering Horn Antenna in Substrate-Integrated Waveguide Technology
In this work, we propose a method for designing an innovative H-plane filtering horn antenna (FHA) based on Substrate Integrated Waveguide (SIW) technology. The approach integrates a bandpass filter directly into the flared section of the horn antenna, thus resulting in an efficient compact multi-functional filtering antenna. To demonstrate the concept, a third-order SIW H-plane FHA with an iris-coupled filtering structure is designed, fabricated, and tested at 5.8 GHz, achieving a 3% fractional bandwidth. The proposed approach significantly enhances the efficiency of conventional horn antenna from a modest 9.2% to 41.3%. The design concept is further extended to millimeter-wave frequencies with an E-plane metal septum filtering structure, where a second-order H-plane FHA centered at 28GHz is designed. Furthermore, the proposed design methodology is systematic and scalable to realize higher order FHA. Additionally, this approach offers substantial size and volume reductions, along with integrated multi-functionality, promoting overall system miniaturization.
- 27 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 15 (5) , 1072-1080
An Innovative H-Plane Filtering Horn Antenna in Substrate-Integrated Waveguide Technology
In this work, we propose a method for designing an innovative H-plane filtering horn antenna (FHA) based on Substrate Integrated Waveguide (SIW) technology. The approach integrates a bandpass filter directly into the flared section of the horn antenna, thus resulting in an efficient compact multi-functional filtering antenna. To demonstrate the concept, a third-order SIW H-plane FHA with an iris-coupled filtering structure is designed, fabricated, and tested at 5.8 GHz, achieving a 3% fractional bandwidth. The proposed approach significantly enhances the efficiency of conventional horn antenna from a modest 9.2% to 41.3%. The design concept is further extended to millimeter-wave frequencies with an E-plane metal septum filtering structure, where a second-order H-plane FHA centered at 28GHz is designed. Furthermore, the proposed design methodology is systematic and scalable to realize higher order FHA. Additionally, this approach offers substantial size and volume reductions, along with integrated multi-functionality, promoting overall system miniaturization.
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (1) , 432-438
Investigation of a Double-Negative Metamaterial-Loaded Helical Slow-Wave Structure: Equivalent Circuit Analysis Approach
This article presents a comprehensive theoretical investigation into a double-negative metamaterial (MTM)-loaded helical slow-wave structure (DNM-HSWS) employing an equivalent circuit analysis (ECA) approach considering the sheath-helix model of the helix. The study involves deriving dispersion and interaction impedance formulations, with a focus on analyzing the propagation and interaction characteristics of the structure. The practically feasible DNM-HSWS is designed and analyzed using CST-microwave studio software. A comparative analysis is conducted between theoretical and simulation results for the designed CST model, verifying the accuracy of the proposed theoretical investigation for the DNM-HSWS. Beyond validation, this study highlights the practical utility of the proposed theoretical investigations and the designed DNM-HSWS within the domain of MTM-inspired vacuum electron device (VED) applications. The findings contribute to advancing the understanding and application of MTM-loaded structures for improved performance in microwave devices.
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 72 (1) , 432-438
Investigation of a Double-Negative Metamaterial-Loaded Helical Slow-Wave Structure: Equivalent Circuit Analysis Approach
This article presents a comprehensive theoretical investigation into a double-negative metamaterial (MTM)-loaded helical slow-wave structure (DNM-HSWS) employing an equivalent circuit analysis (ECA) approach considering the sheath-helix model of the helix. The study involves deriving dispersion and interaction impedance formulations, with a focus on analyzing the propagation and interaction characteristics of the structure. The practically feasible DNM-HSWS is designed and analyzed using CST-microwave studio software. A comparative analysis is conducted between theoretical and simulation results for the designed CST model, verifying the accuracy of the proposed theoretical investigation for the DNM-HSWS. Beyond validation, this study highlights the practical utility of the proposed theoretical investigations and the designed DNM-HSWS within the domain of MTM-inspired vacuum electron device (VED) applications. The findings contribute to advancing the understanding and application of MTM-loaded structures for improved performance in microwave devices.
- 11 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (1) , 267-271
Diagonally Shielded HMSIW-Based Self-Triplexing Radiating Element for 5G Wireless Applications
A compact self-triplexing antenna (STA) operating simultaneously at 5.25GHz, 28.85GHz, and 31.9GHz with better than 33dB isolation among the frequency bands is presented in this paper. The design is based on a diagonally shielded half-mode substrate integrated waveguide (DS-HMSIW) cavity, which is designed by placing an open rectangular slot along the diagonal perfect magnetic wall and a row of metallized vias in a square cavity to shield the RF leakage. The cavity is loaded with two orthogonal modified rectangular slots on its top surface to facilitate triplexing operation. The STA features input reflection better than -10dB over a fractional bandwidth (FBW) of 3.79%, 4.16%, and 3.29% at 5.25GHz, 28.85GHz, and 31.9GHz, respectively. The proposed STA has a peak gain of 5.1 dBi, 8.1 dBi, and 8.3 dBi with good cross-polarization levels at 5.25GHz, 28.85GHz, and 31.9GHz, respectively. The STA achieves an efficiency better than 80%, 90% in microwave and mm-wave frequency regimes, respectively. The proposed STA is modeled, fabricated, and simulated results are experimentally validated.
- 11 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 24 (1) , 267-271
Diagonally Shielded HMSIW-Based Self-Triplexing Radiating Element for 5G Wireless Applications
A compact self-triplexing antenna (STA) operating simultaneously at 5.25GHz, 28.85GHz, and 31.9GHz with better than 33dB isolation among the frequency bands is presented in this paper. The design is based on a diagonally shielded half-mode substrate integrated waveguide (DS-HMSIW) cavity, which is designed by placing an open rectangular slot along the diagonal perfect magnetic wall and a row of metallized vias in a square cavity to shield the RF leakage. The cavity is loaded with two orthogonal modified rectangular slots on its top surface to facilitate triplexing operation. The STA features input reflection better than -10dB over a fractional bandwidth (FBW) of 3.79%, 4.16%, and 3.29% at 5.25GHz, 28.85GHz, and 31.9GHz, respectively. The proposed STA has a peak gain of 5.1 dBi, 8.1 dBi, and 8.3 dBi with good cross-polarization levels at 5.25GHz, 28.85GHz, and 31.9GHz, respectively. The STA achieves an efficiency better than 80%, 90% in microwave and mm-wave frequency regimes, respectively. The proposed STA is modeled, fabricated, and simulated results are experimentally validated.
- 15 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Letters on Electromagnetic Compatibility Practice and Applications
- Vol. 6 (4) , 155-159
Ring Resonator Loaded Log-Periodic Antenna for IEMI Detection Application
A patch added planar log periodic ring resonator meander dipole array (PPLPMDA) antenna having dimensions of 27× 27× 0.16 cm3 is developed to detect an intentional electromagnetic interference (IEMI) signal in the frequency range of 0.5 to 2GHz.A meander line concept has been utilized in the radiator section to lower the antenna size. The lateral dimension of the PPLPMDA antenna is smaller by 36.65% and the horizontal dimension is smaller by 10% compared to the conventional PLPDA antenna. The patches have been included for certain dipoles to get a high and nearly stable gain in the entire operating frequency range. The fabricated PPLPMDA antenna is tested in terms of S-parameters, far field radiation performance, IEMI sensing, etc., and witnessed a good agreement between simulation and measurement results. The measurements show that the PPLPMDA antenna has an average gain of 4.25 ± reflection coefficient |S11| ≤ 10dB, and stable radiation pattern. Compared to the existing designs, the proposed PPLPMDA antenna has a compact nature without sacrificing the far-field performance, which makes it more suitable for system-level integration as a non-powered passive sensor to detect IEMI signals.
- 15 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Letters on Electromagnetic Compatibility Practice and Applications
- Vol. 6 (4) , 155-159
Ring Resonator Loaded Log-Periodic Antenna for IEMI Detection Application
A patch added planar log periodic ring resonator meander dipole array (PPLPMDA) antenna having dimensions of 27× 27× 0.16 cm3 is developed to detect an intentional electromagnetic interference (IEMI) signal in the frequency range of 0.5 to 2GHz.A meander line concept has been utilized in the radiator section to lower the antenna size. The lateral dimension of the PPLPMDA antenna is smaller by 36.65% and the horizontal dimension is smaller by 10% compared to the conventional PLPDA antenna. The patches have been included for certain dipoles to get a high and nearly stable gain in the entire operating frequency range. The fabricated PPLPMDA antenna is tested in terms of S-parameters, far field radiation performance, IEMI sensing, etc., and witnessed a good agreement between simulation and measurement results. The measurements show that the PPLPMDA antenna has an average gain of 4.25 ± reflection coefficient |S11| ≤ 10dB, and stable radiation pattern. Compared to the existing designs, the proposed PPLPMDA antenna has a compact nature without sacrificing the far-field performance, which makes it more suitable for system-level integration as a non-powered passive sensor to detect IEMI signals.
- 13 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (3) , 682-689
Analysis of a New Metamaterial-Loaded Helical Slow-Wave Structure for Vacuum Electron Device Applications
The design of a metamaterial-loaded helical slow-wave structure (MHSWS) is proposed, facilitating the dual purpose of enabling forward-wave (FW) propagation for traveling-wave tubes (TWTs) at lower frequencies and backward-wave (BW) propagation for BW oscillators at higher frequencies within the propagation band. A practically feasible interaction structure is designed, and its dispersion and interaction characteristics are analyzed using CST microwave studio (CST-MWS). An in-depth electromagnetic (EM) field analysis of the proposed MHSWS is conducted, deriving dispersion and interaction impedance formulas to analyze its propagation characteristics comprehensively. Comparative analyses between theoretical and simulation results ensured the reliability of numerical characterizations for the structure, highlighting a strong agreement between theoretical and simulation outcomes. The designed MHSWS supported both FW and BW modes, along with the point of mode-degeneracy that facilitates the slowing and stopping of EM waves inside the structure. Leveraging its advanced propagation and interaction characteristics, the proposed MHSWS established its applicability to designing high-efficiency interaction circuits for vacuum electron device applications.
- 13 March 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (3) , 682-689
Analysis of a New Metamaterial-Loaded Helical Slow-Wave Structure for Vacuum Electron Device Applications
The design of a metamaterial-loaded helical slow-wave structure (MHSWS) is proposed, facilitating the dual purpose of enabling forward-wave (FW) propagation for traveling-wave tubes (TWTs) at lower frequencies and backward-wave (BW) propagation for BW oscillators at higher frequencies within the propagation band. A practically feasible interaction structure is designed, and its dispersion and interaction characteristics are analyzed using CST microwave studio (CST-MWS). An in-depth electromagnetic (EM) field analysis of the proposed MHSWS is conducted, deriving dispersion and interaction impedance formulas to analyze its propagation characteristics comprehensively. Comparative analyses between theoretical and simulation results ensured the reliability of numerical characterizations for the structure, highlighting a strong agreement between theoretical and simulation outcomes. The designed MHSWS supported both FW and BW modes, along with the point of mode-degeneracy that facilitates the slowing and stopping of EM waves inside the structure. Leveraging its advanced propagation and interaction characteristics, the proposed MHSWS established its applicability to designing high-efficiency interaction circuits for vacuum electron device applications.