Tianbin Ren
Research Subjects
Tianbin Ren has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Kai Yang
Institute of Nano and Biopolymeric Materials
3 shared publicationsShun Luo
Institute of Nano and Biopolymeric Materials
3 shared publicationsXiaojian Wu
Institute of Nano and Biopolymeric Materials
3 shared publicationsZhen Zhong
Institute of Nano and Biopolymeric Materials
3 shared publications- Yongyong Li
Shanghai Skin Disease Hospital The Institute for Biomedical Engineering & Nano Science School of Medicine Tongji University Shanghai 200092 P. R. China
2 shared publications Fu Hongye
Institute of Nano- and Bio-Polymeric Materials, School of Materials Science and Engineering, Tongji University, 4800 Caoan Road, Shanghai 201804, China
1 shared publication
Latest Publications
- Open Access
- 9 November 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (66) , 37765-37773
Facile preparation of degradable multi-arm-star-branched waterborne polyurethane with bio-based tannic acid
A facile method was developed for preparation of degradable multi-arm-star-branched waterborne polyurethanes (MWPUs) by incorporation of bio-based material (tannic acid, TA) in the structure of waterborne polyurethanes.
- 9 November 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (66) , 37765-37773
Open AccessFacile preparation of degradable multi-arm-star-branched waterborne polyurethane with bio-based tannic acid
A facile method was developed for preparation of degradable multi-arm-star-branched waterborne polyurethanes (MWPUs) by incorporation of bio-based material (tannic acid, TA) in the structure of waterborne polyurethanes.
- Open Access
- 30 October 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (64) , 36571-36578
In situ and controllable synthesis of Ag NPs in tannic acid-based hyperbranched waterborne polyurethanes to prepare antibacterial polyurethanes/Ag NPs composites
In this research, a simple and facile method was developed for preparation of antibacterial polyurethanes/Ag NPs composites, where tannic acid-based hyperbranched waterborne polyurethanes (THWPU) was employed as both reductant and stabilizer to in situ and controllably synthesize Ag NPs at mild room temperature. The resultant Ag NPs in THWPU was confirmed by UV spectrophotometer, SEM and EDX. The effects of reaction temperature on the properties of the formed Ag NPs were investigated, and the results showed that the formed Ag NPs under room temperature and 80 °C were both spherical, whereas increasing the reaction temperature benefits for promoting the formation of Ag NPs and narrowing the size distribution of the formed Ag NPs. Furthermore, triangular Ag NPs were in situ synthesized in THWPU via adding strong reductant (NaBH4) during the formation of Ag NPs. Both spherical and triangular Ag NPs enhanced the mechanical property, thermal stability and antibacterial performance of THWPU. More importantly, our results demonstrated that formation of spherical Ag NPs in THWPU were beneficial for improving the mechanical property and thermal stability of THWPU, while the formation of triangular Ag NPs enabled THWPU better antibacterial performance against E. coli and S. aureus. Given these advantages, our obtained Ag NPs nanocomposites could be suitable for a broad range of commercial applications, such as medical products, children's products.
- 30 October 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (64) , 36571-36578
Open AccessIn situ and controllable synthesis of Ag NPs in tannic acid-based hyperbranched waterborne polyurethanes to prepare antibacterial polyurethanes/Ag NPs composites
In this research, a simple and facile method was developed for preparation of antibacterial polyurethanes/Ag NPs composites, where tannic acid-based hyperbranched waterborne polyurethanes (THWPU) was employed as both reductant and stabilizer to in situ and controllably synthesize Ag NPs at mild room temperature. The resultant Ag NPs in THWPU was confirmed by UV spectrophotometer, SEM and EDX. The effects of reaction temperature on the properties of the formed Ag NPs were investigated, and the results showed that the formed Ag NPs under room temperature and 80 °C were both spherical, whereas increasing the reaction temperature benefits for promoting the formation of Ag NPs and narrowing the size distribution of the formed Ag NPs. Furthermore, triangular Ag NPs were in situ synthesized in THWPU via adding strong reductant (NaBH4) during the formation of Ag NPs. Both spherical and triangular Ag NPs enhanced the mechanical property, thermal stability and antibacterial performance of THWPU. More importantly, our results demonstrated that formation of spherical Ag NPs in THWPU were beneficial for improving the mechanical property and thermal stability of THWPU, while the formation of triangular Ag NPs enabled THWPU better antibacterial performance against E. coli and S. aureus. Given these advantages, our obtained Ag NPs nanocomposites could be suitable for a broad range of commercial applications, such as medical products, children's products.
- Open Access
- 1 September 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (67) , 42296-42304
High-performance anionic waterborne polyurethane/Ag nanocomposites with excellent antibacterial property via in situ synthesis of Ag nanoparticles
Anionic waterborne polyurethane (WPU)/inorganic nanoparticle composites have attracted growing interest due to their outstanding properties. In our work, high-performance anionic WPU/Ag nanocomposites with excellent antibacterial property were successfully prepared by an in situ method, where carboxylate-functionalized WPUs served as stabilizers for the synthesis of AgNPs. The chemical structure of the prepared WPU and WPU/Ag nanocomposite was characterized via FTIR spectroscopy and UV-vis spectroscopy, while TEM, SEM and XRD were also used to confirm the formation of AgNPs in the WPU matrix. The results demonstrated that the formed AgNPs exhibited a spherical shape and were evenly distributed in the WPU matrix. The size of AgNPs ranged from 5 to 50 nm depending on the amount of added AgNO3 in WPU dispersions. More importantly, incorporation of AgNPs in the WPU matrix was demonstrated to significantly improve the thermal stability, mechanical performance and water resistance property of the WPU films. Furthermore, the presence of AgNPs provided the nanocomposite films with excellent antibacterial behavior against E. coli. Given these advantages, our obtained WPU/Ag nanocomposites could be suitable for a broad range of commercial applications.
- 1 September 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (67) , 42296-42304
Open AccessHigh-performance anionic waterborne polyurethane/Ag nanocomposites with excellent antibacterial property via in situ synthesis of Ag nanoparticles
Anionic waterborne polyurethane (WPU)/inorganic nanoparticle composites have attracted growing interest due to their outstanding properties. In our work, high-performance anionic WPU/Ag nanocomposites with excellent antibacterial property were successfully prepared by an in situ method, where carboxylate-functionalized WPUs served as stabilizers for the synthesis of AgNPs. The chemical structure of the prepared WPU and WPU/Ag nanocomposite was characterized via FTIR spectroscopy and UV-vis spectroscopy, while TEM, SEM and XRD were also used to confirm the formation of AgNPs in the WPU matrix. The results demonstrated that the formed AgNPs exhibited a spherical shape and were evenly distributed in the WPU matrix. The size of AgNPs ranged from 5 to 50 nm depending on the amount of added AgNO3 in WPU dispersions. More importantly, incorporation of AgNPs in the WPU matrix was demonstrated to significantly improve the thermal stability, mechanical performance and water resistance property of the WPU films. Furthermore, the presence of AgNPs provided the nanocomposite films with excellent antibacterial behavior against E. coli. Given these advantages, our obtained WPU/Ag nanocomposites could be suitable for a broad range of commercial applications.
- 8 January 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (19) , 14138-14146
Effect of monomer sequence of poly(histidine/lysine) catiomers on gene packing capacity and delivery efficiency
Polymeric catiomers, which can mimic viruses for gene packing and delivery, have received considerable attention as nonviral vectors for gene therapy. Inspired by the critically important role of the sequence of structural units in various biomolecules, including DNA and protein, in this study, we intend to investigate how the monomer sequence of a polymeric catiomer affects its gene packing capacity and delivery efficiency. The well-documented poly(histidine-co-lysine) was chosen as the scaffold for gene carrier. Four reducible polycations (RPCs) based on sequence-regulated peptides monomers were synthesized. Chemical parameters (namely, composition and molecular weight) of four RPCs were controlled at comparable level except for the monomer sequence. All of the RPCs exhibited low cytotoxicity and effective DNA binding ability. However, these RPCs displayed distinct diversity from each other, especially in their ability of binding to DNA, buffering capacity and transfection efficiency. Using 293T cell as the mode, we found that the regulation of the monomer sequence of polycations could significantly affect their properties for gene delivery, with differences of 100 fold. The sequence effect might be correlated with different chain folding as well as physiochemical properties of RPCs/pDNA complexes, providing new insight for designing gene vector with promising prospects in gene therapy.
- 8 January 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (19) , 14138-14146
Effect of monomer sequence of poly(histidine/lysine) catiomers on gene packing capacity and delivery efficiency
Polymeric catiomers, which can mimic viruses for gene packing and delivery, have received considerable attention as nonviral vectors for gene therapy. Inspired by the critically important role of the sequence of structural units in various biomolecules, including DNA and protein, in this study, we intend to investigate how the monomer sequence of a polymeric catiomer affects its gene packing capacity and delivery efficiency. The well-documented poly(histidine-co-lysine) was chosen as the scaffold for gene carrier. Four reducible polycations (RPCs) based on sequence-regulated peptides monomers were synthesized. Chemical parameters (namely, composition and molecular weight) of four RPCs were controlled at comparable level except for the monomer sequence. All of the RPCs exhibited low cytotoxicity and effective DNA binding ability. However, these RPCs displayed distinct diversity from each other, especially in their ability of binding to DNA, buffering capacity and transfection efficiency. Using 293T cell as the mode, we found that the regulation of the monomer sequence of polycations could significantly affect their properties for gene delivery, with differences of 100 fold. The sequence effect might be correlated with different chain folding as well as physiochemical properties of RPCs/pDNA complexes, providing new insight for designing gene vector with promising prospects in gene therapy.
- 13 June 2012
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 3 (9) , 2561-2569
Engineered polyethylenimine/graphene oxide nanocomposite for nuclear localized gene delivery
Nuclear localized signals (NLS) capable of recognition by nuclear transport proteins can aid the nuclear translocation of the payloads. In this report, NLS peptide PKKKRKV (PV7, one of the primary NLS peptides) was introduced into GO-PEI (10 kDa)/DNA binary complexes to engineer a nuclei localized gene delivery system, based on electrostatic and hydrogen-bonded interactions. To assess the functional mechanism of NLS peptides in the GO-PEI system, the PV7 was introduced via three different routes, including post-addition after the formation of a GO-PEI/DNA binary, simultaneous addition with GO-PEI, pDNA, and prior-addition into the cell culture before treatment with GO-PEI/DNA complexes. In vitro transfection investigations revealed that the ternary composites engineered by the simultaneous route (that is the second route referred to above) exhibit a higher transfection efficiency in comparison with GO-PEI 10 kDa or PEI 10 kDa and are even comparable with PEI 25 kDa with optimized parameters. The study on the intracellular uptake of Cy3 labeled pDNA indicated that the addition of PV7 could effectively assist the GO-PEI to deliver plasmid DNA directly into the nucleus without obvious aggregations. With the improved capability of gene delivery, however, the cytotoxicity of GO-PEI was much lower than PEI 10 kDa and PEI 25 kDa against both HeLa cells and 293 T cells. Therefore, the PV7 conjugated GO-PEI system compromised the contradiction between the cytotoxicity and transfection efficiency, which could be an alternative strategy for a nuclear targeted gene delivery vehicle.
- 13 June 2012
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 3 (9) , 2561-2569
Engineered polyethylenimine/graphene oxide nanocomposite for nuclear localized gene delivery
Nuclear localized signals (NLS) capable of recognition by nuclear transport proteins can aid the nuclear translocation of the payloads. In this report, NLS peptide PKKKRKV (PV7, one of the primary NLS peptides) was introduced into GO-PEI (10 kDa)/DNA binary complexes to engineer a nuclei localized gene delivery system, based on electrostatic and hydrogen-bonded interactions. To assess the functional mechanism of NLS peptides in the GO-PEI system, the PV7 was introduced via three different routes, including post-addition after the formation of a GO-PEI/DNA binary, simultaneous addition with GO-PEI, pDNA, and prior-addition into the cell culture before treatment with GO-PEI/DNA complexes. In vitro transfection investigations revealed that the ternary composites engineered by the simultaneous route (that is the second route referred to above) exhibit a higher transfection efficiency in comparison with GO-PEI 10 kDa or PEI 10 kDa and are even comparable with PEI 25 kDa with optimized parameters. The study on the intracellular uptake of Cy3 labeled pDNA indicated that the addition of PV7 could effectively assist the GO-PEI to deliver plasmid DNA directly into the nucleus without obvious aggregations. With the improved capability of gene delivery, however, the cytotoxicity of GO-PEI was much lower than PEI 10 kDa and PEI 25 kDa against both HeLa cells and 293 T cells. Therefore, the PV7 conjugated GO-PEI system compromised the contradiction between the cytotoxicity and transfection efficiency, which could be an alternative strategy for a nuclear targeted gene delivery vehicle.
- Open Access
- 1 May 2011
- Published by SAGE Publications in Polymers from Renewable Resources
- Vol. 2 (2) , 49-62
Preparation, Characterization and Properties of Binary and Ternary Blends with Thermoplastic Starch, Poly(Lactic Acid) and Poly(Butylene Succinate)
Binay and ternary blends of thermoplastic starch (TPS), poly(lactic acid) (PLA) and poly(butylene succinate) (PBS) were prepared using a one-step extrusion process. The concentration of TPS in both binary and ternary blends was fixed at 50 wt%, with the rest being PLA and PBS. A compatibilizer was used to improve the interfacial affinity between TPS and the polyester. The thermal properties, mechanical properties and water absorption were characterized. The result showed that the mechanical properties of the blends exhibited a dramatic improvement in elongation at break with increasing PBS content; the process properties and heat softening characteristics improved by adding PBS to the blends. Binary and ternary blends with TPS/PLA/PBS could be applied as necessary by changing the content of the component.
- 1 May 2011
- Published by SAGE Publications in Polymers from Renewable Resources
- Vol. 2 (2) , 49-62
Open AccessPreparation, Characterization and Properties of Binary and Ternary Blends with Thermoplastic Starch, Poly(Lactic Acid) and Poly(Butylene Succinate)
Binay and ternary blends of thermoplastic starch (TPS), poly(lactic acid) (PLA) and poly(butylene succinate) (PBS) were prepared using a one-step extrusion process. The concentration of TPS in both binary and ternary blends was fixed at 50 wt%, with the rest being PLA and PBS. A compatibilizer was used to improve the interfacial affinity between TPS and the polyester. The thermal properties, mechanical properties and water absorption were characterized. The result showed that the mechanical properties of the blends exhibited a dramatic improvement in elongation at break with increasing PBS content; the process properties and heat softening characteristics improved by adding PBS to the blends. Binary and ternary blends with TPS/PLA/PBS could be applied as necessary by changing the content of the component.
- 18 November 2005
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 99 (3) , 1045-1049
Chain‐linked lactic acid polymers by benzene diisocyanate
- 18 November 2005
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 99 (3) , 1045-1049
Chain‐linked lactic acid polymers by benzene diisocyanate