Jisun Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jisun Kim has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- Chih-Kang Shih
The University of Texas at Austin
7 shared publications - E. Ward Plummer
Louisiana State Univ, Dept Phys & Astron, Baton Rouge, LA 70803 USA
4 shared publications Rongying Jin
Department of Physics & Astronomy, Louisiana State University, Baton Rouge, Louisiana 70803, USA
3 shared publications- Shangjr Gwo
Department of Physics, National Tsing-Hua University, Hsinchu, Taiwan
3 shared publications Yu-Jung Lu
Department of Physics, National Tsing-Hua University , Hsinchu 30013, Taiwan
3 shared publicationsZhenyu Zhang
3 shared publications
Latest Publications
- 28 October 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (18)
Using k-means to sort spectra: Electronic order mapping from scanning tunneling spectroscopy measurements
Hyperspectral imaging techniques have a unique ability to probe the inhomogeneity of material properties whether driven by compositional variation or other forms of phase segregation. In the doped cuprates, iridates, and related materials, scanning tunneling microscopy/spectroscopy (STM/STS) measurements have found the emergence of pseudogap “puddles” from the macroscopically Mott insulating phase with increased doping. However, categorizing this hyperspectral data by electronic order is not trivial and has often been done with ad hoc methods. In this paper, we demonstrate the utility of k-means, a simple and easy-to-use unsupervised clustering method, as a tool for classifying heterogeneous scanning tunneling spectroscopy data by electronic order for Rh-doped Sr2IrO4, a cuprate-like material. Applied to STM data acquired within the Mott phase, k-means was able to identify areas of Mott order and of pseudogap order. The unsupervised nature of k-means limits avenues for bias and provides clustered spectral shapes without a priori knowledge of the physics. Additionally, we demonstrate the use of k-means as a preprocessing tool to constrain phenomenological function fitting. Clustering the data allows us to reduce the fitting parameter space, limiting over-fitting. We suggest k-means as a fast, simple model for processing hyperspectral data on materials of mixed electronic order.
- 28 October 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (18)
Using k-means to sort spectra: Electronic order mapping from scanning tunneling spectroscopy measurements
Hyperspectral imaging techniques have a unique ability to probe the inhomogeneity of material properties whether driven by compositional variation or other forms of phase segregation. In the doped cuprates, iridates, and related materials, scanning tunneling microscopy/spectroscopy (STM/STS) measurements have found the emergence of pseudogap “puddles” from the macroscopically Mott insulating phase with increased doping. However, categorizing this hyperspectral data by electronic order is not trivial and has often been done with ad hoc methods. In this paper, we demonstrate the utility of k-means, a simple and easy-to-use unsupervised clustering method, as a tool for classifying heterogeneous scanning tunneling spectroscopy data by electronic order for Rh-doped Sr2IrO4, a cuprate-like material. Applied to STM data acquired within the Mott phase, k-means was able to identify areas of Mott order and of pseudogap order. The unsupervised nature of k-means limits avenues for bias and provides clustered spectral shapes without a priori knowledge of the physics. Additionally, we demonstrate the use of k-means as a preprocessing tool to constrain phenomenological function fitting. Clustering the data allows us to reduce the fitting parameter space, limiting over-fitting. We suggest k-means as a fast, simple model for processing hyperspectral data on materials of mixed electronic order.
- 17 March 2022
- Published by American Physical Society (APS) in Physical Review B
- Vol. 105 (12) , L121111
Quasiparticle interference observation of the topologically nontrivial drumhead surface state in ZrSiTe
Drumhead surface states that link together loops of nodal lines arise in Dirac nodal-line semimetals as a consequence of the topologically nontrivial band crossings. We used low-temperature scanning tunneling microscopy and Fourier-transformed scanning tunneling spectroscopy to investigate the quasiparticle interference (QPI) properties of ZrSiTe. Our results show two scattering signals across portions of the drumhead state resolving the energy-momentum relationship through the occupied and unoccupied energy ranges it is predicted to span. Observation of this drumhead state is in contrast to previous studies on ZrSiS and ZrSiSe, where the QPI was dominated by topologically trivial bulk bands and surface states. Furthermore, we observe a near scattering process across the point, enabled by scattering between the spin-split drumhead bands in this material, showing the persistence of the drumhead state even in the presence of spin-orbit coupling.- 17 March 2022
- Published by American Physical Society (APS) in Physical Review B
- Vol. 105 (12) , L121111
Quasiparticle interference observation of the topologically nontrivial drumhead surface state in ZrSiTe
Drumhead surface states that link together loops of nodal lines arise in Dirac nodal-line semimetals as a consequence of the topologically nontrivial band crossings. We used low-temperature scanning tunneling microscopy and Fourier-transformed scanning tunneling spectroscopy to investigate the quasiparticle interference (QPI) properties of ZrSiTe. Our results show two scattering signals across portions of the drumhead state resolving the energy-momentum relationship through the occupied and unoccupied energy ranges it is predicted to span. Observation of this drumhead state is in contrast to previous studies on ZrSiS and ZrSiSe, where the QPI was dominated by topologically trivial bulk bands and surface states. Furthermore, we observe a near scattering process across the point, enabled by scattering between the spin-split drumhead bands in this material, showing the persistence of the drumhead state even in the presence of spin-orbit coupling.- 1 October 2017
- Published by Elsevier in Surface Science
- Vol. 664, 21-28
Surface sum frequency generation spectroscopy on non-centrosymmetric crystal GaAs (001)
- 1 October 2017
- Published by Elsevier in Surface Science
- Vol. 664, 21-28
Surface sum frequency generation spectroscopy on non-centrosymmetric crystal GaAs (001)
- 24 May 2017
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 114 (24) , 6256-6261
Nontrivial Berry phase in magnetic BaMnSb 2 semimetal
Significance: Among topological materials, experimental study of topological semimetals that host Dirac/Weyl fermions has just begun, even though these topological concepts were proposed nearly a century ago by Dirac and Weyl. Our work shows magnetic semimetal BaMnSb 2 exhibits nearly zero-mass fermions with high mobility and a nontrivial Berry phase. What is unique is the magnetic ordering, indicating the system is Weyl type due to time-reversal symmetry breaking. Theory shows that the spin order is very fragile, so it is expected that the application of magnetic field or uniaxial pressure could drive the material to be type II Weyl semimetal. In this material, Mn mainly controls the magnetic structure, whereas Sb in only one lattice site is responsible for the Dirac behavior.
- 24 May 2017
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 114 (24) , 6256-6261
Nontrivial Berry phase in magnetic BaMnSb 2 semimetal
Significance: Among topological materials, experimental study of topological semimetals that host Dirac/Weyl fermions has just begun, even though these topological concepts were proposed nearly a century ago by Dirac and Weyl. Our work shows magnetic semimetal BaMnSb 2 exhibits nearly zero-mass fermions with high mobility and a nontrivial Berry phase. What is unique is the magnetic ordering, indicating the system is Weyl type due to time-reversal symmetry breaking. Theory shows that the spin order is very fragile, so it is expected that the application of magnetic field or uniaxial pressure could drive the material to be type II Weyl semimetal. In this material, Mn mainly controls the magnetic structure, whereas Sb in only one lattice site is responsible for the Dirac behavior.
- Open Access
- 24 March 2017
- Published by American Physical Society (APS) in Physical Review B
- Vol. 95 (9) , 094118
Surface phases of the transition-metal dichalcogenideTransition-metal dichalcogenide has attracted attention because of its striped lattice, charge ordering, and superconductivity. We have investigated the surface structure of , using low-energy electron diffraction and scanning tunneling microscopy. A complex striped lattice modulation as a function of temperature is observed, which shows hysteresis between cooling and warming. While the bulk 5 × 1 and 8 × 1 phases appear at high temperatures, the surface ground state has the 6 × 1 phase, not seen in the bulk, and the surface transition temperatures are distinct from the bulk. The broken symmetry at the surface creates a quite different phase diagram, with the coexistence of several periodicities resembling devil's staircase behavior.- 24 March 2017
- Published by American Physical Society (APS) in Physical Review B
- Vol. 95 (9) , 094118
Open AccessSurface phases of the transition-metal dichalcogenideTransition-metal dichalcogenide has attracted attention because of its striped lattice, charge ordering, and superconductivity. We have investigated the surface structure of , using low-energy electron diffraction and scanning tunneling microscopy. A complex striped lattice modulation as a function of temperature is observed, which shows hysteresis between cooling and warming. While the bulk 5 × 1 and 8 × 1 phases appear at high temperatures, the surface ground state has the 6 × 1 phase, not seen in the bulk, and the surface transition temperatures are distinct from the bulk. The broken symmetry at the surface creates a quite different phase diagram, with the coexistence of several periodicities resembling devil's staircase behavior. - Open Access
- 14 October 2016
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 35365
Interrogating the superconductor Ca10(Pt4As8)(Fe2−xPtxAs2)5 Layer-by-layer
Ever since the discovery of high-Tc superconductivity in layered cuprates, the roles that individual layers play have been debated, due to difficulty in layer-by-layer characterization. While there is similar challenge in many Fe-based layered superconductors, the newly-discovered Ca10(Pt4As8)(Fe2As2)5 provides opportunities to explore superconductivity layer by layer, because it contains both superconducting building blocks (Fe2As2 layers) and intermediate Pt4As8 layers. Cleaving a single crystal under ultra-high vacuum results in multiple terminations: an ordered Pt4As8 layer, two reconstructed Ca layers on the top of a Pt4As8 layer, and disordered Ca layer on the top of Fe2As2 layer. The electronic properties of individual layers are studied using scanning tunneling microscopy/spectroscopy (STM/S), which reveals different spectra for each surface. Remarkably superconducting coherence peaks are seen only on the ordered Ca/Pt4As8 layer. Our results indicate that an ordered structure with proper charge balance is required in order to preserve superconductivity.
- 14 October 2016
- Published by Springer Nature in Scientific Reports
- Vol. 6 (1) , 35365
Open AccessInterrogating the superconductor Ca10(Pt4As8)(Fe2−xPtxAs2)5 Layer-by-layer
Ever since the discovery of high-Tc superconductivity in layered cuprates, the roles that individual layers play have been debated, due to difficulty in layer-by-layer characterization. While there is similar challenge in many Fe-based layered superconductors, the newly-discovered Ca10(Pt4As8)(Fe2As2)5 provides opportunities to explore superconductivity layer by layer, because it contains both superconducting building blocks (Fe2As2 layers) and intermediate Pt4As8 layers. Cleaving a single crystal under ultra-high vacuum results in multiple terminations: an ordered Pt4As8 layer, two reconstructed Ca layers on the top of a Pt4As8 layer, and disordered Ca layer on the top of Fe2As2 layer. The electronic properties of individual layers are studied using scanning tunneling microscopy/spectroscopy (STM/S), which reveals different spectra for each surface. Remarkably superconducting coherence peaks are seen only on the ordered Ca/Pt4As8 layer. Our results indicate that an ordered structure with proper charge balance is required in order to preserve superconductivity.
- 6 September 2016
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 113 (38) , 10513-10517
Ultrathin two-dimensional superconductivity with strong spin–orbit coupling
Significance: By studying epitaxially grown Pb thin films, this paper explores a new regime in the physics of uniform 2D superconductivity, in which the spin–orbit coupling-induced Rashba splitting is larger than the superconducting gap. The first quantitative determination of superfluid rigidity in nearly atomically thin 2D superconductors was performed using measurement that covers microscopic to macroscopic length scales to establish uniformity. The extraordinarily strong parallel critical fields were discovered, which is greatly in excess of the normal Clogston–Chandrasekhar limit. Moreover, this remarkable behavior is theoretically explained as a consequence of strong spin–orbit coupling in 2D superconductors that are uniform but in the dirty limit.
- 6 September 2016
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 113 (38) , 10513-10517
Ultrathin two-dimensional superconductivity with strong spin–orbit coupling
Significance: By studying epitaxially grown Pb thin films, this paper explores a new regime in the physics of uniform 2D superconductivity, in which the spin–orbit coupling-induced Rashba splitting is larger than the superconducting gap. The first quantitative determination of superfluid rigidity in nearly atomically thin 2D superconductors was performed using measurement that covers microscopic to macroscopic length scales to establish uniformity. The extraordinarily strong parallel critical fields were discovered, which is greatly in excess of the normal Clogston–Chandrasekhar limit. Moreover, this remarkable behavior is theoretically explained as a consequence of strong spin–orbit coupling in 2D superconductors that are uniform but in the dirty limit.
- Open Access
- 22 August 2016
- Published by American Physical Society (APS) in Physical Review B
- Vol. 94 (8) , 085420
Hidden phases revealed at the surface of double-layeredDouble-layered has received phenomenal consideration because it exhibits a plethora of exotic phases when perturbed. New phases emerge with the application of pressure, magnetic field, or doping. Here, we show that creating a surface is an alternative and effective way to reveal hidden phases that are different from those seen in the bulk by investigating the surface properties of . Driven by the tilt distortion of octahedra, the surface of is less metallic than the bulk. In contrast, because of the vanishing of tilt and enhanced rotation with Mn doping, the surface of is metallic, while the bulk is insulating. Our result demonstrates that the electronic and structural properties at the surface are intimately coupled and consistent with quasitwo-dimensional character.- 22 August 2016
- Published by American Physical Society (APS) in Physical Review B
- Vol. 94 (8) , 085420
Open AccessHidden phases revealed at the surface of double-layeredDouble-layered has received phenomenal consideration because it exhibits a plethora of exotic phases when perturbed. New phases emerge with the application of pressure, magnetic field, or doping. Here, we show that creating a surface is an alternative and effective way to reveal hidden phases that are different from those seen in the bulk by investigating the surface properties of . Driven by the tilt distortion of octahedra, the surface of is less metallic than the bulk. In contrast, because of the vanishing of tilt and enhanced rotation with Mn doping, the surface of is metallic, while the bulk is insulating. Our result demonstrates that the electronic and structural properties at the surface are intimately coupled and consistent with quasitwo-dimensional character. - 22 July 2014
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 14 (8) , 4381-4388
All-Color Plasmonic Nanolasers with Ultralow Thresholds: Autotuning Mechanism for Single-Mode Lasing
We report on the first demonstration of broadband tunable, single-mode plasmonic nanolasers (spasers) emitting in the full visible spectrum. These nanolasers are based on a single metal–oxide–semiconductor nanostructure platform comprising of InGaN/GaN semiconductor nanorods supported on an Al2O3-capped epitaxial Ag film. In particular, all-color lasing in subdiffraction plasmonic resonators is achieved via a novel mechanism based on a property of weak size dependence inherent in spasers. Moreover, we have successfully reduced the continuous-wave (CW) lasing thresholds to ultrasmall values for all three primary colors and have clearly demonstrated the possibility of “thresholdless” lasing for the blue plasmonic nanolaser.
- 22 July 2014
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 14 (8) , 4381-4388
All-Color Plasmonic Nanolasers with Ultralow Thresholds: Autotuning Mechanism for Single-Mode Lasing
We report on the first demonstration of broadband tunable, single-mode plasmonic nanolasers (spasers) emitting in the full visible spectrum. These nanolasers are based on a single metal–oxide–semiconductor nanostructure platform comprising of InGaN/GaN semiconductor nanorods supported on an Al2O3-capped epitaxial Ag film. In particular, all-color lasing in subdiffraction plasmonic resonators is achieved via a novel mechanism based on a property of weak size dependence inherent in spasers. Moreover, we have successfully reduced the continuous-wave (CW) lasing thresholds to ultrasmall values for all three primary colors and have clearly demonstrated the possibility of “thresholdless” lasing for the blue plasmonic nanolaser.
- 13 June 2014
- Published by Wiley in Advanced Materials
- Vol. 26 (35) , 6106-6110
Intrinsic Optical Properties and Enhanced Plasmonic Response of Epitaxial Silver
Using atomically smooth epitaxial silver films, new optical permittivity highlighting significant loss reduction in the visible frequency range is extracted. Largely enhanced propagation distances of surface plasmon polaritons are measured, confirming the low intrinsic loss in silver. The new permittivity is free of extrinsic spectral features associated with grain boundaries and localized plasmons inevitably present in thermally deposited films.
- 13 June 2014
- Published by Wiley in Advanced Materials
- Vol. 26 (35) , 6106-6110
Intrinsic Optical Properties and Enhanced Plasmonic Response of Epitaxial Silver
Using atomically smooth epitaxial silver films, new optical permittivity highlighting significant loss reduction in the visible frequency range is extracted. Largely enhanced propagation distances of surface plasmon polaritons are measured, confirming the low intrinsic loss in silver. The new permittivity is free of extrinsic spectral features associated with grain boundaries and localized plasmons inevitably present in thermally deposited films.