Bogdan Wiszniewski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Bogdan Wiszniewski has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- Agata Kołakowska
Faculty of Electronics, Telecommunications and Informatics, Gdańsk University of Technology, Narutowicza 11/12, 80-233 Gdansk, Poland
5 shared publications - Henryk Krawczyk
Gdansk University of Technology
4 shared publications - Jerzy Dembski
Faculty of Electronics, Telecommunications and Informatics, Gdańsk University of Technology, Narutowicza 11/12, 80-233 Gdansk, Poland
4 shared publications H. Krawczyk
3 shared publicationsJerzy Kaczorek
3 shared publications- Krzysztof Kuchcinski
Department of Computer Science, Lund University, Sweden
2 shared publications
Latest Publications
- Open Access
- 18 November 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (4) , 187-194
SCADA-Based Offshore Wind Turbine Monitoring: A Review of Methods of Addressing Marine Environmental Challenges
Offshore wind turbines could be an important aspect of the global green energy transition, but their implementation is challenging due to the harshness of marine environments. Compared to onshore structures, offshore wind turbines are exposed to stronger loads from waves and more turbulent atmospheric conditions, while salt-laden air accelerates structural degradation. These variable environmental conditions also make diagnostics difficult. Supervisory control and data acquisition (SCADA) systems, which are already embedded in all turbines, provide a cost-effective source of operational data for performance assessment and condition monitoring. Although experience of SCADA-based onshore testing over recent decades has provided valuable knowledge, these insights cannot be directly applied to offshore monitoring. This review summarises the current state of knowledge of SCADA-based monitoring for offshore wind turbines, compares it with onshore approaches, and highlights offshore-specific challenges arising from the marine environment.
- 18 November 2025
- Published by Walter de Gruyter GmbH in Polish Maritime Research
- Vol. 32 (4) , 187-194
Open AccessSCADA-Based Offshore Wind Turbine Monitoring: A Review of Methods of Addressing Marine Environmental Challenges
Offshore wind turbines could be an important aspect of the global green energy transition, but their implementation is challenging due to the harshness of marine environments. Compared to onshore structures, offshore wind turbines are exposed to stronger loads from waves and more turbulent atmospheric conditions, while salt-laden air accelerates structural degradation. These variable environmental conditions also make diagnostics difficult. Supervisory control and data acquisition (SCADA) systems, which are already embedded in all turbines, provide a cost-effective source of operational data for performance assessment and condition monitoring. Although experience of SCADA-based onshore testing over recent decades has provided valuable knowledge, these insights cannot be directly applied to offshore monitoring. This review summarises the current state of knowledge of SCADA-based monitoring for offshore wind turbines, compares it with onshore approaches, and highlights offshore-specific challenges arising from the marine environment.
- Open Access
Anomaly Detection and Segmentation in Measurement Signals on Edge Devices Using Artificial Neural Networks
In this paper, three alternative solutions to the problem of detecting and cleaning anomalies in soil signal time series, involving the use of artificial neural networks deployed on in situ data measurement end devices, are proposed and investigated. These models are designed to perform calculations on MCUs, characterized by significantly limited computing capabilities and a limited supply of electrical power. Training of neural network models is carried out based on data from multiple sensors in the supporting computing cloud instance, while detection and removal of anomalies with a trained model takes place on the constrained end devices. With such a distribution of work, it is necessary to achieve a sound compromise between prediction accuracy and the computational complexity of the detection process. In this study, neural-primed heuristic (NPH), autoencoder-based (AEB), and U-Net-based (UNB) approaches were tested, which were found to vary regarding both prediction accuracy and computational complexity. Labeled data were used to train the models, transforming the detection task into an anomaly segmentation task. The obtained results reveal that the UNB approach presents certain advantages; however, it requires a significant volume of training data and has a relatively high time complexity which, in turn, translates into increased power consumption by the end device. For this reason, the other two approaches—NPH and AEB—may be worth considering as reasonable alternatives when developing in situ data cleaning solutions for IoT measurement systems.
Open AccessAnomaly Detection and Segmentation in Measurement Signals on Edge Devices Using Artificial Neural Networks
In this paper, three alternative solutions to the problem of detecting and cleaning anomalies in soil signal time series, involving the use of artificial neural networks deployed on in situ data measurement end devices, are proposed and investigated. These models are designed to perform calculations on MCUs, characterized by significantly limited computing capabilities and a limited supply of electrical power. Training of neural network models is carried out based on data from multiple sensors in the supporting computing cloud instance, while detection and removal of anomalies with a trained model takes place on the constrained end devices. With such a distribution of work, it is necessary to achieve a sound compromise between prediction accuracy and the computational complexity of the detection process. In this study, neural-primed heuristic (NPH), autoencoder-based (AEB), and U-Net-based (UNB) approaches were tested, which were found to vary regarding both prediction accuracy and computational complexity. Labeled data were used to train the models, transforming the detection task into an anomaly segmentation task. The obtained results reveal that the UNB approach presents certain advantages; however, it requires a significant volume of training data and has a relatively high time complexity which, in turn, translates into increased power consumption by the end device. For this reason, the other two approaches—NPH and AEB—may be worth considering as reasonable alternatives when developing in situ data cleaning solutions for IoT measurement systems.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Performance Evaluation of Nomadic Data Collection with a UAV-LoRa System
Deploying IoT systems for in-situ measurements is difficult in areas with poor telecommunications infrastructure. A viable alternative is to use Unmanned Aerial Vehicle (UAV)s to collect data from end devices on the ground. However, the latter should minimize the volume of data to be transmitted via the available time window and yet use its electrical supply sparingly. To achieve this, appropriate communication channel parameters must be configured to ensure both energy efficiency and a sufficiently large transmission range, allowing the UAV to cover the maximum possible area during its mission. Various LoRa configurations were examined, focusing on transmission power, payload size, and spreading factor, to minimize energy consumption while maintaining reliable communication. To identify optimal configurations, threshold-based performance measures were incorporated into the analysis. It has been demonstrated how, based on physical properties of the measured soil signals, the data payload can be effectively reduced, and a LoRa Peer-To-Peer (P2P) method proposed for configuring communication parameters - ensuring power-efficient transmission, verified in three real-world scenarios in agriculture, forestry, and river management. The proposed solution does not require significant investments in the communications infrastructure and has great application potential in environmental monitoring.
- 9 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Performance Evaluation of Nomadic Data Collection with a UAV-LoRa System
Deploying IoT systems for in-situ measurements is difficult in areas with poor telecommunications infrastructure. A viable alternative is to use Unmanned Aerial Vehicle (UAV)s to collect data from end devices on the ground. However, the latter should minimize the volume of data to be transmitted via the available time window and yet use its electrical supply sparingly. To achieve this, appropriate communication channel parameters must be configured to ensure both energy efficiency and a sufficiently large transmission range, allowing the UAV to cover the maximum possible area during its mission. Various LoRa configurations were examined, focusing on transmission power, payload size, and spreading factor, to minimize energy consumption while maintaining reliable communication. To identify optimal configurations, threshold-based performance measures were incorporated into the analysis. It has been demonstrated how, based on physical properties of the measured soil signals, the data payload can be effectively reduced, and a LoRa Peer-To-Peer (P2P) method proposed for configuring communication parameters - ensuring power-efficient transmission, verified in three real-world scenarios in agriculture, forestry, and river management. The proposed solution does not require significant investments in the communications infrastructure and has great application potential in environmental monitoring.
- 27 May 2025
- Published by Springer Nature
- p. 106-116
Resilient Software Development of Intelligent Services in Cloud Environments
- 27 May 2025
- Published by Springer Nature
- p. 106-116
Resilient Software Development of Intelligent Services in Cloud Environments
- Open Access
- 6 May 2025
- Published by Association for Computing Machinery (ACM)
- p. 616-617
Hierarchical Alignment of Multiple Time Series With Missing Timestamps
- 6 May 2025
- Published by Association for Computing Machinery (ACM)
- p. 616-617
Open AccessHierarchical Alignment of Multiple Time Series With Missing Timestamps
- 1 April 2025
- Published by Springer Nature
- p. 328-342
Collaborative Learning as a Service – a Blueprint for a Cloud Based Rural IoTs Deployment Facility
- 1 April 2025
- Published by Springer Nature
- p. 328-342
Collaborative Learning as a Service – a Blueprint for a Cloud Based Rural IoTs Deployment Facility
- Open Access
Automatic Cleaning of Time Series Data in Rural Internet of Things Ecosystems That Use Nomadic Gateways
A serious limitation to the deployment of IoT solutions in rural areas may be the lack of available telecommunications infrastructure enabling the continuous collection of measurement data. A nomadic computing system, using a UAV carrying an on-board gateway, can handle this; it leads, however, to a number of technical challenges. One is the intermittent collection of data from ground sensors governed by weather conditions for the UAV measurement missions. Therefore, each sensor should be equipped with software that allows for the cleaning of collected data before transmission to the fly-over nomadic gateway from erroneous, misleading, or otherwise redundant data—to minimize their volume and fit them in the limited transmission window. This task, however, may be a barrier for end devices constrained in several ways, such as limited energy reserve, insufficient computational capability of their MCUs, and short transmission range of their RAT modules. In this paper, a comprehensive approach to these problems is proposed, which enables the implementation of an anomaly detector in time series data with low computational demand. The proposed solution uses the analysis of the physics of the measured signals and is based on a simple anomaly model whose parameters can be optimized using popular AI techniques. It was validated during a full 10-month vegetation period in a real Rural IoT system deployed by Gdańsk Tech.
Open AccessAutomatic Cleaning of Time Series Data in Rural Internet of Things Ecosystems That Use Nomadic Gateways
A serious limitation to the deployment of IoT solutions in rural areas may be the lack of available telecommunications infrastructure enabling the continuous collection of measurement data. A nomadic computing system, using a UAV carrying an on-board gateway, can handle this; it leads, however, to a number of technical challenges. One is the intermittent collection of data from ground sensors governed by weather conditions for the UAV measurement missions. Therefore, each sensor should be equipped with software that allows for the cleaning of collected data before transmission to the fly-over nomadic gateway from erroneous, misleading, or otherwise redundant data—to minimize their volume and fit them in the limited transmission window. This task, however, may be a barrier for end devices constrained in several ways, such as limited energy reserve, insufficient computational capability of their MCUs, and short transmission range of their RAT modules. In this paper, a comprehensive approach to these problems is proposed, which enables the implementation of an anomaly detector in time series data with low computational demand. The proposed solution uses the analysis of the physics of the measured signals and is based on a simple anomaly model whose parameters can be optimized using popular AI techniques. It was validated during a full 10-month vegetation period in a real Rural IoT system deployed by Gdańsk Tech.
- Open Access
- 5 March 2021
- Published by Springer Nature in Multimedia Tools and Applications
- Vol. 80 (13) , 20089-20124
Just look at to open it up:
Electronic documents constitute specific units of information, and protecting them against unauthorized access is a challenging task. This is because a password protected document may be stolen from its host computer or intercepted while on transfer and exposed to unlimited offline attacks. The key issue is, therefore, making document passwords hard to crack. We propose to augment a common text password authentication interface to encrypted documents with a biometric facial identity verification providing highly personalized security mechanism based on pseudo-identities. In consequence the encrypted document can be unlocked with the legitimate user’s face, while for everyone else stays encrypted with a hard to crack text password. This paper makes two contributions: (1) The proposed scheme enables password autofill without referring to any external service, which significantly limits the possibilities of an attack by adversaries when opening, reading and editing the protected document, (2) By the adoption of biometric verification techniques enabling fine-tuning of false acceptance and false rejection rates, it provides for responsible adaptation to users.
- 5 March 2021
- Published by Springer Nature in Multimedia Tools and Applications
- Vol. 80 (13) , 20089-20124
Open AccessJust look at to open it up:
Electronic documents constitute specific units of information, and protecting them against unauthorized access is a challenging task. This is because a password protected document may be stolen from its host computer or intercepted while on transfer and exposed to unlimited offline attacks. The key issue is, therefore, making document passwords hard to crack. We propose to augment a common text password authentication interface to encrypted documents with a biometric facial identity verification providing highly personalized security mechanism based on pseudo-identities. In consequence the encrypted document can be unlocked with the legitimate user’s face, while for everyone else stays encrypted with a hard to crack text password. This paper makes two contributions: (1) The proposed scheme enables password autofill without referring to any external service, which significantly limits the possibilities of an attack by adversaries when opening, reading and editing the protected document, (2) By the adoption of biometric verification techniques enabling fine-tuning of false acceptance and false rejection rates, it provides for responsible adaptation to users.
- 1 January 2019
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 52 (8) , 211-220
Building Polish space sector – from small islands of excellence to a national innovation ecosystem
- 1 January 2019
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 52 (8) , 211-220
Building Polish space sector – from small islands of excellence to a national innovation ecosystem
- Open Access
- 1 January 2019
- Published by Inderscience Publishers in International Journal of Ad Hoc and Ubiquitous Computing
- Vol. 32 (3)
Bilateral multi-issue negotiation of execution contexts by proactive document agents
International publishers of academic, scientific and professional journals since 1979.
- 1 January 2019
- Published by Inderscience Publishers in International Journal of Ad Hoc and Ubiquitous Computing
- Vol. 32 (3)
Open AccessBilateral multi-issue negotiation of execution contexts by proactive document agents
International publishers of academic, scientific and professional journals since 1979.