Zoheir Khademian
Zoheir Khademian has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Masami Nakagawa
Department of Mining Engineering Colorado School of Mines Golden CO USA
2 shared publications- Andrew Speake
National Laboratory of the Rockies (NLR), Golden, CO (United States)
1 shared publication Bo H. Kim
CDC NIOSH, Spokane Mining Research Division, Spokane, USA
1 shared publicationE Poeck
1 shared publicationE. N. Rubinstein
Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, Pittsburgh, USA
1 shared publication- Eunhye Kim
Colorado School of Mines
1 shared publication
Latest Publications
- 13 February 2024
- Published by Springer Nature in Mining, Metallurgy & Exploration
- Vol. 41 (2) , 695-705
Contribution of Individual Support Components to Roof Stability in a Longwall Gateroad
According to the 2010–2019 Mine Safety and Health Administration (MSHA) accident report database, 91% of reported ground control accidents in US longwall mines were caused by roof instability. Gateroads are subjected to significant changes in loading conditions from the development to the longwall abutment loading phases. When combined with thinly bedded shale roof, found in many US longwall coal mines, the design of efficient roof support becomes challenging. In previous work, the bonded block modeling (BBM) of roof by UDEC was validated against field extensometer measurements in a longwall entry roof at a 180-m depth of cover. The BBM was shown capable of capturing delamination and buckling of shale roof, one of the main roof instability mechanisms in longwall mines. This paper presents the recent findings on the roof-support interaction using BBM models of the same longwall entry. The effects of cable bolts, roof bolt density, and strap support on potential roof instability are studied. Results demonstrate the potential for BBM numerical models to help understand the complex roof and support system interactions and to assist with optimizing gateroad support systems.
- 13 February 2024
- Published by Springer Nature in Mining, Metallurgy & Exploration
- Vol. 41 (2) , 695-705
Contribution of Individual Support Components to Roof Stability in a Longwall Gateroad
According to the 2010–2019 Mine Safety and Health Administration (MSHA) accident report database, 91% of reported ground control accidents in US longwall mines were caused by roof instability. Gateroads are subjected to significant changes in loading conditions from the development to the longwall abutment loading phases. When combined with thinly bedded shale roof, found in many US longwall coal mines, the design of efficient roof support becomes challenging. In previous work, the bonded block modeling (BBM) of roof by UDEC was validated against field extensometer measurements in a longwall entry roof at a 180-m depth of cover. The BBM was shown capable of capturing delamination and buckling of shale roof, one of the main roof instability mechanisms in longwall mines. This paper presents the recent findings on the roof-support interaction using BBM models of the same longwall entry. The effects of cable bolts, roof bolt density, and strap support on potential roof instability are studied. Results demonstrate the potential for BBM numerical models to help understand the complex roof and support system interactions and to assist with optimizing gateroad support systems.
- 15 February 2023
- Published by Springer Nature in Mining, Metallurgy & Exploration
- Vol. 40 (2) , 543-553
Implications of Shale Gas Well Integrity Failure Near a Longwall Mine Under Shallow Cover
- 15 February 2023
- Published by Springer Nature in Mining, Metallurgy & Exploration
- Vol. 40 (2) , 543-553
Implications of Shale Gas Well Integrity Failure Near a Longwall Mine Under Shallow Cover
- 19 June 2022
- Published by Springer Nature in Mining, Metallurgy & Exploration
- Vol. 39 (4) , 1465-1473
Rockmass Permeability Induced by Longwall Mining Under Deep Cover: Potential Gas Inflow from a Sheared Gas Well
- 19 June 2022
- Published by Springer Nature in Mining, Metallurgy & Exploration
- Vol. 39 (4) , 1465-1473
Rockmass Permeability Induced by Longwall Mining Under Deep Cover: Potential Gas Inflow from a Sheared Gas Well
- 1 August 2021
- Published by Elsevier in Sustainable Cities and Society
- Vol. 71
Renewable energy analysis in indigenous communities using bottom-up demand prediction
- 1 August 2021
- Published by Elsevier in Sustainable Cities and Society
- Vol. 71
Renewable energy analysis in indigenous communities using bottom-up demand prediction
- Open Access
- 10 January 2020
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 125 (1)
Numerical Study on Earthquake Energy Partitioning: Relationships Among Radiated Energy, Seismic Moment, and Stress Drop
This paper aims at mechanistically studying some aspects of earthquake energy partitioning with a focus on the radiated energy (Es) and seismic moment (Mo) relationships for investigating differences between estimates of average dynamic stress drop ( ) and static stress drop ( ). We evaluate to what extent a relatively simple but analytically verified faulting simulation can explain such differences. We adopt a numerical methodology developed in the 2‐D Universal Distinct Element Code to simulate fault slip with slip‐weakening responses. A method is introduced for recording the ground reaction to slip and from which we discuss the energy partitioning in ideal cases of rupture. We examine a shallow strike‐slip fault model where a locally peaked stress is gradually developed on the fault by applying tectonic stresses away from the fault surface until a rupture is initiated locally and propagated outward. The rupture is terminated when the available energy is exhausted by the fracture energy and friction work especially as the rupture is followed by a creep. With investigating roles of the available energy for rupture and the fracture energy, we display limited cases where Mo does not, at least proportionately, scale with Es. Results show this is because Mo, compared to Es, does not fully represent the energy available for initiating a rupture and the fracture energy consumed during its propagation. That is why 2μEs/Mo and 2μEs/ηRMo estimates, with the radiation ratio ηR and rigidity μ, may significantly differ from and .
- 10 January 2020
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 125 (1)
Open AccessNumerical Study on Earthquake Energy Partitioning: Relationships Among Radiated Energy, Seismic Moment, and Stress Drop
This paper aims at mechanistically studying some aspects of earthquake energy partitioning with a focus on the radiated energy (Es) and seismic moment (Mo) relationships for investigating differences between estimates of average dynamic stress drop ( ) and static stress drop ( ). We evaluate to what extent a relatively simple but analytically verified faulting simulation can explain such differences. We adopt a numerical methodology developed in the 2‐D Universal Distinct Element Code to simulate fault slip with slip‐weakening responses. A method is introduced for recording the ground reaction to slip and from which we discuss the energy partitioning in ideal cases of rupture. We examine a shallow strike‐slip fault model where a locally peaked stress is gradually developed on the fault by applying tectonic stresses away from the fault surface until a rupture is initiated locally and propagated outward. The rupture is terminated when the available energy is exhausted by the fracture energy and friction work especially as the rupture is followed by a creep. With investigating roles of the available energy for rupture and the fracture energy, we display limited cases where Mo does not, at least proportionately, scale with Es. Results show this is because Mo, compared to Es, does not fully represent the energy available for initiating a rupture and the fracture energy consumed during its propagation. That is why 2μEs/Mo and 2μEs/ηRMo estimates, with the radiation ratio ηR and rigidity μ, may significantly differ from and .
- Open Access
- 3 May 2019
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 124 (5) , 1157-1176
Simulation of Lunar Soil With Irregularly Shaped, Crushable Grains: Effects of Grain Shapes on the Mechanical Behaviors
One of the challenges to overcome in Moon mining operations, such as soil handling, drilling, excavation, and wheeled movement, is understanding the mechanical behaviors of lunar soil, which is composed of grains characterized by highly irregular shapes. The impracticality of performing mechanical experiments on lunar soil samples has made computational techniques useful for exploring the mechanical behaviors of lunar soil. This paper uses particle flow code and describes a procedure for simulating lunar soil grains with specific size, shape, and strength distributions. We adopt data from soil samples 64501 and 60501 retrieved in Apollo 16. Lunar soil samples are simulated as assemblies of different shapes of grains consisting of rigid spheres connected through parallel bonds. We classify grains into four categories based on their shape: agglutinate, breccia A, breccia B, and plagioclase. We simulate each grain based on available imaging studies on their shape characteristics. We reveal the significance of grain shape irregularity through angle‐of‐repose tests on samples with and without irregularly shaped agglutinates. Results show that the shape irregularity increases the angle of repose by 6°. We repeat the test under different gravitational acceleration ranging from 0.1 to 25 m/s2 and show that for values below about 10 m/s2, the angle of repose is inversely related to the gravity but above 10 m/s2, remains independent of the gravity. We perform triaxial compression tests to investigate behaviors of simulated samples under confined loadings. The confinement varies from zero to 15 kPa, corresponding to the lateral in situ stress at depths up to 250 cm. The cohesion and friction angle derived from the triaxial tests are shown to agree with the lab and in situ measurements. This numerical practice and presented methodology pave the way for full‐scale simulation of mining operations on the Moon surface.
- 3 May 2019
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Planets
- Vol. 124 (5) , 1157-1176
Open AccessSimulation of Lunar Soil With Irregularly Shaped, Crushable Grains: Effects of Grain Shapes on the Mechanical Behaviors
One of the challenges to overcome in Moon mining operations, such as soil handling, drilling, excavation, and wheeled movement, is understanding the mechanical behaviors of lunar soil, which is composed of grains characterized by highly irregular shapes. The impracticality of performing mechanical experiments on lunar soil samples has made computational techniques useful for exploring the mechanical behaviors of lunar soil. This paper uses particle flow code and describes a procedure for simulating lunar soil grains with specific size, shape, and strength distributions. We adopt data from soil samples 64501 and 60501 retrieved in Apollo 16. Lunar soil samples are simulated as assemblies of different shapes of grains consisting of rigid spheres connected through parallel bonds. We classify grains into four categories based on their shape: agglutinate, breccia A, breccia B, and plagioclase. We simulate each grain based on available imaging studies on their shape characteristics. We reveal the significance of grain shape irregularity through angle‐of‐repose tests on samples with and without irregularly shaped agglutinates. Results show that the shape irregularity increases the angle of repose by 6°. We repeat the test under different gravitational acceleration ranging from 0.1 to 25 m/s2 and show that for values below about 10 m/s2, the angle of repose is inversely related to the gravity but above 10 m/s2, remains independent of the gravity. We perform triaxial compression tests to investigate behaviors of simulated samples under confined loadings. The confinement varies from zero to 15 kPa, corresponding to the lateral in situ stress at depths up to 250 cm. The cohesion and friction angle derived from the triaxial tests are shown to agree with the lab and in situ measurements. This numerical practice and presented methodology pave the way for full‐scale simulation of mining operations on the Moon surface.
- 1 April 2018
- Published by Elsevier in Journal of Natural Gas Science and Engineering
- Vol. 52, 582-590
Modeling injection-induced seismicity through calculation of radiated seismic energy
- 1 April 2018
- Published by Elsevier in Journal of Natural Gas Science and Engineering
- Vol. 52, 582-590
Modeling injection-induced seismicity through calculation of radiated seismic energy