Fereidoun Sabetghadam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Fereidoun Sabetghadam has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Mehdi Badri
Mechanical and Aerospace Eng. Dept., Science and Research Branch Islamic Azad University (IAU) Tehran Iran
2 shared publicationsShervin Sharafatmandjoor
Mechanical and Aerospace Eng. Dept., Science and Research Branch Islamic Azad University (IAU) Tehran Iran
2 shared publicationsAbdollah Shajari Ghasemkheili
Department of Mechanical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
1 shared publication- Hashem Parvaneh Masiha
Faculty of Mathematics, K.N. Toosi University of Technology, Tehran, Iran
1 shared publication - Hassan Ghassemi
Amirkabir University of Technology
1 shared publication - Hassen Aydi
Université de Sousse Institut Supérieur d'Informatique et des Techniques de Communication H. Sousse 4000 Tunisia
1 shared publication
Latest Publications
- Open Access
- 21 March 2026
- Published by Elsevier in SSRN Electronic Journal
Homothetic Hodge–de Rham Theory and a Geometric Regularization of Elliptic Boundary Value Problems
We introduce a homothetic extension of classical Weyl–integrable geometry by generalizing the usual linear gauge transformations to affine homothetic transformations centered at a distinguished harmonic, scale–invariant form αd. After re–linearizing these affine gauge transformations via a suitable shift of variables, we obtain a twisted exterior calculus that is structurally equivalent to the Witten deformation of the de Rham complex. On this basis we develop a corresponding homothetic Hodge theory: we define a twisted adjoint and homothetic Laplacian, and prove a homothetic Hodge decomposition theorem on compact Riemannian manifolds. In the context of partial differential equations, we show that the scalar homothetic Laplacian provides a rigorous diffuse–interface (volume–penalization) representation of elliptic boundary value problems. Modeling the Weyl scale field as a fixed distribution localized near a hypersurface, the resulting lower–order geometric terms form a penalty layer that enforces Dirichlet, Neumann, or Cauchy data within a single geometric equation. This formulation yields consistent weak solutions even in the presence of classically incompatible Cauchy data. As an application, we construct a non–singular model for point sources in elliptic field equations, which preserves the correct Coulombian far–field while removing the core singularity and yielding finite field energy.
- 21 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessHomothetic Hodge–de Rham Theory and a Geometric Regularization of Elliptic Boundary Value Problems
We introduce a homothetic extension of classical Weyl–integrable geometry by generalizing the usual linear gauge transformations to affine homothetic transformations centered at a distinguished harmonic, scale–invariant form αd. After re–linearizing these affine gauge transformations via a suitable shift of variables, we obtain a twisted exterior calculus that is structurally equivalent to the Witten deformation of the de Rham complex. On this basis we develop a corresponding homothetic Hodge theory: we define a twisted adjoint and homothetic Laplacian, and prove a homothetic Hodge decomposition theorem on compact Riemannian manifolds. In the context of partial differential equations, we show that the scalar homothetic Laplacian provides a rigorous diffuse–interface (volume–penalization) representation of elliptic boundary value problems. Modeling the Weyl scale field as a fixed distribution localized near a hypersurface, the resulting lower–order geometric terms form a penalty layer that enforces Dirichlet, Neumann, or Cauchy data within a single geometric equation. This formulation yields consistent weak solutions even in the presence of classically incompatible Cauchy data. As an application, we construct a non–singular model for point sources in elliptic field equations, which preserves the correct Coulombian far–field while removing the core singularity and yielding finite field energy.
- Open Access
- 24 September 2020
- Published by Hindawi Limited in Journal of Function Spaces
- Vol. 2020, 1-5
New Results for Set-Valued Mappings on Ordered Metric Spaces
We establish some new fixed point results for order-closed multivalued mappings in complete metric spaces endowed with a partial order.
- 24 September 2020
- Published by Hindawi Limited in Journal of Function Spaces
- Vol. 2020, 1-5
Open AccessNew Results for Set-Valued Mappings on Ordered Metric Spaces
We establish some new fixed point results for order-closed multivalued mappings in complete metric spaces endowed with a partial order.
- Open Access
Dark Fields do Exist in Weyl Geometry
A generalized Weyl integrable geometry (GWIG) is obtained from simultaneous affine transformations of the tangent and cotangent bundles of a (pseudo)-Riemannian manifold. In comparison with the classical Weyl integrable geometry (CWIG), there are two generalizations here: interactions with an arbitrary dark field, and, anisotropic dilation. It means that CWIG already has interactions with a {\it null} dark field. Some classical mathematics and physics problems may be addressed in GWIG. For example, by derivation of Maxwell's equations and its sub-sets, the conservation, hyperbolic, and elliptic equations on GWIG; we imposed interactions with arbitrary dark fields. Moreover, by using a notion analogous to Penrose conformal infinity, one can impose boundary conditions canonically on these equations. As a prime example, we did it for the elliptic equation, where we obtained a singularity-free potential theory. Then we used this potential theory in the construction of a non-singular model for a point charged particle. It solves the difficulty of infinite energy of the classical vacuum state.
Open AccessDark Fields do Exist in Weyl Geometry
A generalized Weyl integrable geometry (GWIG) is obtained from simultaneous affine transformations of the tangent and cotangent bundles of a (pseudo)-Riemannian manifold. In comparison with the classical Weyl integrable geometry (CWIG), there are two generalizations here: interactions with an arbitrary dark field, and, anisotropic dilation. It means that CWIG already has interactions with a {\it null} dark field. Some classical mathematics and physics problems may be addressed in GWIG. For example, by derivation of Maxwell's equations and its sub-sets, the conservation, hyperbolic, and elliptic equations on GWIG; we imposed interactions with arbitrary dark fields. Moreover, by using a notion analogous to Penrose conformal infinity, one can impose boundary conditions canonically on these equations. As a prime example, we did it for the elliptic equation, where we obtained a singularity-free potential theory. Then we used this potential theory in the construction of a non-singular model for a point charged particle. It solves the difficulty of infinite energy of the classical vacuum state.
- 7 May 2020
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 42 (6) , 1-13
Applying the immersed boundaries to the incompressible fluid flows using inverse source problem
- 7 May 2020
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 42 (6) , 1-13
Applying the immersed boundaries to the incompressible fluid flows using inverse source problem
- 31 July 2019
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Methods
- Vol. 17 (09)
A Transformation for Imposing the Rigid Bodies on the Solution of the Vorticity-Stream Function Formulation of Incompressible Navier–Stokes Equations
A new penalization method is proposed for implementing the rigid bodies on the solution of the vorticity-stream function formulation of the incompressible Navier–Stokes equations. The method is based upon an active transformation of dependent variables. The transformation may be interpreted as time dilation. In this interpretation, the rigid body is considered as a region where the time is dilated infinitely, that is, time is stopped. The transformation is introduced in the vorticity and stream function equations to achieve a set of modified equations. The, in the modified equations, the time dilation of the solid region is approached to infinity. The mathematical and physical properties of the modified equations are investigated and implementation of the no-slip and no-penetration conditions are justified. Moreover, a suitable numerical method is presented for the solution of the modified equations. In the proposed numerical method, time integration is performed via the Crank–Nicolson method, and the semi-discrete equations are spatially discretized via second-order finite differencing on a uniform Cartesian grid. The method is applied to the fluid flow around a square obstacle placed in a channel, a sudden flow perpendicular to a thin flat plate, and the flow around a circular cylinder. The accuracy of the numerical solutions is evaluated.
- 31 July 2019
- Published by World Scientific Pub Co Pte Ltd in International Journal of Computational Methods
- Vol. 17 (09)
A Transformation for Imposing the Rigid Bodies on the Solution of the Vorticity-Stream Function Formulation of Incompressible Navier–Stokes Equations
A new penalization method is proposed for implementing the rigid bodies on the solution of the vorticity-stream function formulation of the incompressible Navier–Stokes equations. The method is based upon an active transformation of dependent variables. The transformation may be interpreted as time dilation. In this interpretation, the rigid body is considered as a region where the time is dilated infinitely, that is, time is stopped. The transformation is introduced in the vorticity and stream function equations to achieve a set of modified equations. The, in the modified equations, the time dilation of the solid region is approached to infinity. The mathematical and physical properties of the modified equations are investigated and implementation of the no-slip and no-penetration conditions are justified. Moreover, a suitable numerical method is presented for the solution of the modified equations. In the proposed numerical method, time integration is performed via the Crank–Nicolson method, and the semi-discrete equations are spatially discretized via second-order finite differencing on a uniform Cartesian grid. The method is applied to the fluid flow around a square obstacle placed in a channel, a sudden flow perpendicular to a thin flat plate, and the flow around a circular cylinder. The accuracy of the numerical solutions is evaluated.
- Open Access
- 18 May 2015
- Published by Oxford University Press (OUP) in Journal of Mechanics
- Vol. 31 (6) , 745-755
A One-Continuum Approach for Mutual Interaction of Fluids and Structures
A new simulation method for solving fluid-structure two-way coupling problems has been developed. All the basic equations are numerically solved on a fixed Cart
- 18 May 2015
- Published by Oxford University Press (OUP) in Journal of Mechanics
- Vol. 31 (6) , 745-755
Open AccessA One-Continuum Approach for Mutual Interaction of Fluids and Structures
A new simulation method for solving fluid-structure two-way coupling problems has been developed. All the basic equations are numerically solved on a fixed Cart
- Open Access
Construction of Solenoidal Immersed Velocity Vectors Using the Kinematic Velocity--Vorticity Relation
The present paper suggests a method for obtaining incompressible solenoidal velocity vectors that satisfy approximately the desired immersed velocity boundary conditions. The method employs merely the mutual kinematic relations between the velocity and vorticity fields (i.e, the curl and Laplacian operators). An initial non-solenoidal velocity field is extended to a regular domain via a zero-velocity margin, where an extended vorticity is found. Re-calculation of the velocities (subjected to appropriate boundary conditions), yields the desired solenoidal velocity vector. The method is applied to the two- and three-dimensional problems for the homogeneous Dirichlet, as well as periodic boundary conditions. The results show that the solenoidality is satisfied up to the machine accuracy for the periodic boundary conditions (employing the Fourier--spectral solution method), while an improvement in the solenoidality is achievable for the homogenous boundary conditions.
Open AccessConstruction of Solenoidal Immersed Velocity Vectors Using the Kinematic Velocity--Vorticity Relation
The present paper suggests a method for obtaining incompressible solenoidal velocity vectors that satisfy approximately the desired immersed velocity boundary conditions. The method employs merely the mutual kinematic relations between the velocity and vorticity fields (i.e, the curl and Laplacian operators). An initial non-solenoidal velocity field is extended to a regular domain via a zero-velocity margin, where an extended vorticity is found. Re-calculation of the velocities (subjected to appropriate boundary conditions), yields the desired solenoidal velocity vector. The method is applied to the two- and three-dimensional problems for the homogeneous Dirichlet, as well as periodic boundary conditions. The results show that the solenoidality is satisfied up to the machine accuracy for the periodic boundary conditions (employing the Fourier--spectral solution method), while an improvement in the solenoidality is achievable for the homogenous boundary conditions.
- Open Access
An Immersed Boundary Fourier Pseudo-spectral Method for Simulation of Confined Two-dimensional Incompressible Flows
The present paper is devoted to implementation of the immersed boundary technique into the Fourier pseudo-spectral solution of the vorticity-velocity formulation of the two-dimensional incompressible Navier--Stokes equations. The immersed boundary conditions are implemented via direct modification of the convection and diffusion terms, and therefore, in contrast to many other similar methods, there is not an explicit external forcing function in the present formulation. The desired immersed boundary conditions are approximated on some regular grid points, using different orders (up to second-order) polynomial extrapolations. At the beginning of each timestep, the solenoidal velocities (also satisfying the desired immersed boundary conditions), are obtained and fed into a conventional pseudo-spectral solver, together with a modified vorticity. The zero-mean pseudo-spectral solution is employed, and therefore, the method is applicable to the confined flows with zero mean velocity and vorticity, and without mean vorticity dynamics. In comparison to the classical Fourier pseudo-spectral solution, the method needs ${\cal O}(4(1+\log N)N)$ more operations for boundary condition settings. Therefore, the computational cost of the method, as a whole, is scaled by ${(N \log N)}$. The classical explicit fourth-order Runge--Kutta method is used for time integration, and the boundary conditions are set at the beginning of each sub-step, in order to increasing the time accuracy. The method is applied to some fixed and moving boundary problems, with different orders of boundary conditions; and in this way, the accuracy and performance of the method are investigated and compared with the classical Fourier pseudo-spectral solutions.Open AccessAn Immersed Boundary Fourier Pseudo-spectral Method for Simulation of Confined Two-dimensional Incompressible Flows
The present paper is devoted to implementation of the immersed boundary technique into the Fourier pseudo-spectral solution of the vorticity-velocity formulation of the two-dimensional incompressible Navier--Stokes equations. The immersed boundary conditions are implemented via direct modification of the convection and diffusion terms, and therefore, in contrast to many other similar methods, there is not an explicit external forcing function in the present formulation. The desired immersed boundary conditions are approximated on some regular grid points, using different orders (up to second-order) polynomial extrapolations. At the beginning of each timestep, the solenoidal velocities (also satisfying the desired immersed boundary conditions), are obtained and fed into a conventional pseudo-spectral solver, together with a modified vorticity. The zero-mean pseudo-spectral solution is employed, and therefore, the method is applicable to the confined flows with zero mean velocity and vorticity, and without mean vorticity dynamics. In comparison to the classical Fourier pseudo-spectral solution, the method needs ${\cal O}(4(1+\log N)N)$ more operations for boundary condition settings. Therefore, the computational cost of the method, as a whole, is scaled by ${(N \log N)}$. The classical explicit fourth-order Runge--Kutta method is used for time integration, and the boundary conditions are set at the beginning of each sub-step, in order to increasing the time accuracy. The method is applied to some fixed and moving boundary problems, with different orders of boundary conditions; and in this way, the accuracy and performance of the method are investigated and compared with the classical Fourier pseudo-spectral solutions. - 5 October 2009
- Published by Springer Nature
- p. 277-280
Implementation of Vortex Stretching into the Two-Dimensional Navier-Stokes Equations via Arbitrary External Straining
- 5 October 2009
- Published by Springer Nature
- p. 277-280
Implementation of Vortex Stretching into the Two-Dimensional Navier-Stokes Equations via Arbitrary External Straining