Ana Catarina Lima
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ana Catarina Lima has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- João Filipe Mano
University of Aveiro Campus Universitário de Santiago
11 shared publications - Carmen Alvarez-Lorenzo
Departamento de Farmacología, Farmacia y Tecnología Farmacéutica, I+D Farma (GI-1645), Facultad de Farmacia, Instituto de Materiales (iMATUS) and Health Research Institute of Santiago de Compostela (IDIS), Universidade de Santiago de Compostela, Spain
5 shared publications - Angel Concheiro
I+D Farma Group (GI-1645), Department of Pharmacology, Pharmacy and Pharmaceutical Technology, Facultad de Farmacia and Instituto de Materiales (iMATUS), Universidade de Santiago de Compostela, Santiago de Compostela 15782, Spain; Health Research Institute of Santiago de Compostela (IDIS), Complexo Hospitalario Universitario de Santiago de Compostela, Travesa da Choupana s/n., 15706 Santiago de Compostela, Spain
3 shared publications - Ana María Puga
Grupo USP-CEU de Excelencia “Nutrición para la Vida (Nutrition for Life)”, Ref: E02/0720, Departamento de Ciencias Farmacéuticas y de la Salud, Facultad de Farmacia, Universidad San Pablo-CEU, CEU Universities, Urbanización Montepríncipe, 28660 Madrid, Spain
2 shared publications Wenlong Song
B’s Research Group-Biomaterials Biodegradables and Biomimetics Department of Polymer Engineering, University of Minho, Guimarães, Portugal
2 shared publications- Ana Sofia Silva
Department of Chemistry CICECO – Aveiro Institute of Materials University of Aveiro Aveiro 3810‐193 Portugal
1 shared publication
Latest Publications
- 20 January 2015
- Published by Taylor & Francis in Nanomedicine
- Vol. 10 (2) , 271-297
Micro/Nano-Structured Superhydrophobic Surfaces in the Biomedical Field: Part II: Applications Overview
The properties of surfaces define the acceptance and integration of biomaterials in vivo, as well as the material's efficiency when used at research or manufacturing levels. The presence of micro/nano-topographical structures and low surface energies could bring several advantages when highly repellent surfaces are employed in the biomedical field. Biomimetic superhydrophobic surfaces have been explored for diverse applications: as an intrinsic characteristic of biomaterials to be implanted; as materials that exhibit special interactions with biological entities; or to be used in ex vivo applications. This article aims to focus on the main motivations and requirements in the biomedical field that pushed for the utilization of superhydrophobic surfaces as suitable alternatives, as well as the great evolution of applications that have emerged in the last few years.
- 20 January 2015
- Published by Taylor & Francis in Nanomedicine
- Vol. 10 (2) , 271-297
Micro/Nano-Structured Superhydrophobic Surfaces in the Biomedical Field: Part II: Applications Overview
The properties of surfaces define the acceptance and integration of biomaterials in vivo, as well as the material's efficiency when used at research or manufacturing levels. The presence of micro/nano-topographical structures and low surface energies could bring several advantages when highly repellent surfaces are employed in the biomedical field. Biomimetic superhydrophobic surfaces have been explored for diverse applications: as an intrinsic characteristic of biomaterials to be implanted; as materials that exhibit special interactions with biological entities; or to be used in ex vivo applications. This article aims to focus on the main motivations and requirements in the biomedical field that pushed for the utilization of superhydrophobic surfaces as suitable alternatives, as well as the great evolution of applications that have emerged in the last few years.
- 19 January 2015
- Published by Taylor & Francis in Nanomedicine
- Vol. 10 (1) , 103-119
Micro-/Nano-Structured Superhydrophobic Surfaces in the Biomedical Field: Part I: Basic Concepts and Biomimetic Approaches
Inspired by natural structures, great attention has been devoted to the study and development of surfaces with extreme wettable properties. The meticulous study of natural systems revealed that the...
- 19 January 2015
- Published by Taylor & Francis in Nanomedicine
- Vol. 10 (1) , 103-119
Micro-/Nano-Structured Superhydrophobic Surfaces in the Biomedical Field: Part I: Basic Concepts and Biomimetic Approaches
Inspired by natural structures, great attention has been devoted to the study and development of surfaces with extreme wettable properties. The meticulous study of natural systems revealed that the...
- 15 August 2014
- Published by Springer Nature in Stem Cell Reviews and Reports
- Vol. 11 (1) , 161-179
Fast and Mild Strategy, Using Superhydrophobic Surfaces, to Produce Collagen/Platelet Lysate Gel Beads for Skin Regeneration
Platelet lysate (PL) was encapsulated in collagen (Coll) millimetric gel beads, on biomimetic superhydrophobic surfaces, under mild conditions, with the aim of obtaining easy-to-handle formulations able to provide sustained release of multiple growth factors for skin ulcers treatment. The gel particles were prepared with various concentrations of PL incorporating or not stem cells, and tested as freshly prepared or after being freeze-dried or cryopreserved. Coll + PL particles were evaluated regarding degradation in collagenase-rich environment (simulating the aggressive environment of the chronic ulcers), sustained release of total protein, PDGF-BB and VEGF, cell proliferation (using particles as the only source of growth factors), scratch wound recovery and angiogenic capability. Compared to Coll solely particles, incorporation of PL notably enhanced cell proliferation (inside and outside gels) and favored scratch wound recovery and angiogenesis. Moreover, cell-laden gel particles containing PL notably improved cell proliferation and even migration of cells from one particle towards a neighbor one, which led to cell-cell contacts and the spontaneous formation of tissue layers in which the spherical gels were interconnected by the stem cells.
- 15 August 2014
- Published by Springer Nature in Stem Cell Reviews and Reports
- Vol. 11 (1) , 161-179
Fast and Mild Strategy, Using Superhydrophobic Surfaces, to Produce Collagen/Platelet Lysate Gel Beads for Skin Regeneration
Platelet lysate (PL) was encapsulated in collagen (Coll) millimetric gel beads, on biomimetic superhydrophobic surfaces, under mild conditions, with the aim of obtaining easy-to-handle formulations able to provide sustained release of multiple growth factors for skin ulcers treatment. The gel particles were prepared with various concentrations of PL incorporating or not stem cells, and tested as freshly prepared or after being freeze-dried or cryopreserved. Coll + PL particles were evaluated regarding degradation in collagenase-rich environment (simulating the aggressive environment of the chronic ulcers), sustained release of total protein, PDGF-BB and VEGF, cell proliferation (using particles as the only source of growth factors), scratch wound recovery and angiogenic capability. Compared to Coll solely particles, incorporation of PL notably enhanced cell proliferation (inside and outside gels) and favored scratch wound recovery and angiogenesis. Moreover, cell-laden gel particles containing PL notably improved cell proliferation and even migration of cells from one particle towards a neighbor one, which led to cell-cell contacts and the spontaneous formation of tissue layers in which the spherical gels were interconnected by the stem cells.
- 28 May 2014
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 2 (30) , 4943-4956
Free and copolymerized γ-cyclodextrins regulate the performance of dexamethasone-loaded dextran microspheres for bone regeneration
Incorporation of γ-cyclodextrins (γ-CD), as free entities or structural monomers (acrylamidomethyl-γ-cyclodextrin, γ-CD–NMA), into dextran-methacrylate (dextran-MA) photopolymerized spheres modifies the loading and release of an osteogenic agent.
- 28 May 2014
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 2 (30) , 4943-4956
Free and copolymerized γ-cyclodextrins regulate the performance of dexamethasone-loaded dextran microspheres for bone regeneration
Incorporation of γ-cyclodextrins (γ-CD), as free entities or structural monomers (acrylamidomethyl-γ-cyclodextrin, γ-CD–NMA), into dextran-methacrylate (dextran-MA) photopolymerized spheres modifies the loading and release of an osteogenic agent.
- 9 December 2013
- Published by SAGE Publications in Journal of Bioactive and Compatible Polymers
- Vol. 29 (1) , 50-65
Sequential ionic and thermogelation of chitosan spherical hydrogels prepared using superhydrophobic surfaces to immobilize cells and drugs
Chitosan is soluble in acidic media, which makes it incompatible for the encapsulation of cells and pH-sensitive molecules. In this work, a mild chitosan-based system with two sequential gelation steps is proposed, where the model drug dexamethasone and L929 cells are immobilized inside hydrogel beads. Superhydrophobic surfaces were used to produce the spherical hydrogel particles that provided favorable conditions to encapsulate cells or bioactive agents. First, the chitosan acidic solution was neutralized with β-glycerophosphate at room temperature to pH 6.2. Suspended cells (or dexamethasone) in the formulation were dispensed in controlled volumes onto biomimetic polystyrene superhydrophobic surfaces, to form spherical shapes. The addition of sodium tripolyphosphate on the top of each sphere induced an ionic gelation process of the chitosan through electrostatic interactions. At 37°C, the hydrophobicity of the chitosan-based formulations increased and a second gelation step occurred, which increased the elastic modulus. In addition, the pH-responsive behavior characteristic of chitosan was maintained. The softness and flexibility of the system can potentially be utilized to implant cells and therapeutic molecules using less invasive procedures.
- 9 December 2013
- Published by SAGE Publications in Journal of Bioactive and Compatible Polymers
- Vol. 29 (1) , 50-65
Sequential ionic and thermogelation of chitosan spherical hydrogels prepared using superhydrophobic surfaces to immobilize cells and drugs
Chitosan is soluble in acidic media, which makes it incompatible for the encapsulation of cells and pH-sensitive molecules. In this work, a mild chitosan-based system with two sequential gelation steps is proposed, where the model drug dexamethasone and L929 cells are immobilized inside hydrogel beads. Superhydrophobic surfaces were used to produce the spherical hydrogel particles that provided favorable conditions to encapsulate cells or bioactive agents. First, the chitosan acidic solution was neutralized with β-glycerophosphate at room temperature to pH 6.2. Suspended cells (or dexamethasone) in the formulation were dispensed in controlled volumes onto biomimetic polystyrene superhydrophobic surfaces, to form spherical shapes. The addition of sodium tripolyphosphate on the top of each sphere induced an ionic gelation process of the chitosan through electrostatic interactions. At 37°C, the hydrophobicity of the chitosan-based formulations increased and a second gelation step occurred, which increased the elastic modulus. In addition, the pH-responsive behavior characteristic of chitosan was maintained. The softness and flexibility of the system can potentially be utilized to implant cells and therapeutic molecules using less invasive procedures.
- 1 October 2013
- Published by Elsevier in Carbohydrate Polymers
- Vol. 98 (1) , 331-340
Pectin-coated chitosan microgels crosslinked on superhydrophobic surfaces for 5-fluorouracil encapsulation
- 1 October 2013
- Published by Elsevier in Carbohydrate Polymers
- Vol. 98 (1) , 331-340
Pectin-coated chitosan microgels crosslinked on superhydrophobic surfaces for 5-fluorouracil encapsulation
- 1 May 2013
- Published by SAGE Publications in Tissue Engineering Part A
- Vol. 19 (9-10) , 1175-1187
Novel Methodology Based on Biomimetic Superhydrophobic Substrates to Immobilize Cells and Proteins in Hydrogel Spheres for Applications in Bone Regeneration
Cell-based therapies for regenerative medicine have been characterized by the low retention and integration of injected cells into host structures. Cell immobilization in hydrogels for target cell delivery has been developed to circumvent this issue. In this work mesenchymal stem cells isolated from Wistar rats bone marrow (rMSCs) were immobilized in alginate beads fabricated using an innovative approach involving the gellification of the liquid precursor droplets onto biomimetic superhydrophobic surfaces without the need of any precipitation bath. The process occurred in mild conditions preventing the loss of cell viability. Furthermore, fibronectin (FN) was also immobilized inside alginate beads with high efficiency in order to mimic the composition of the extracellular matrix. This process occurred in a very fast way (around 5 min), at room temperature, without aggressive mechanical strengths or particle aggregation. The methodology employed allowed the production of alginate beads exhibiting a homogenous rMSCs and FN distribution. Encapsulated rMSCs remained viable and were released from the alginate for more than 20 days. In vivo assays were also performed, by implanting these particles in a calvarial bone defect to evaluate their potential for bone tissue regeneration. Microcomputed tomography and histological analysis results showed that this hybrid system accelerated bone regeneration process. The methodology employed had a dual role by preventing cell and FN loss and avoiding any contamination of the beads or exchange of molecules with the surrounding environment. In principle, the method used for cell encapsulation could be extended to other systems aimed to be used in tissue regeneration strategies.
- 1 May 2013
- Published by SAGE Publications in Tissue Engineering Part A
- Vol. 19 (9-10) , 1175-1187
Novel Methodology Based on Biomimetic Superhydrophobic Substrates to Immobilize Cells and Proteins in Hydrogel Spheres for Applications in Bone Regeneration
Cell-based therapies for regenerative medicine have been characterized by the low retention and integration of injected cells into host structures. Cell immobilization in hydrogels for target cell delivery has been developed to circumvent this issue. In this work mesenchymal stem cells isolated from Wistar rats bone marrow (rMSCs) were immobilized in alginate beads fabricated using an innovative approach involving the gellification of the liquid precursor droplets onto biomimetic superhydrophobic surfaces without the need of any precipitation bath. The process occurred in mild conditions preventing the loss of cell viability. Furthermore, fibronectin (FN) was also immobilized inside alginate beads with high efficiency in order to mimic the composition of the extracellular matrix. This process occurred in a very fast way (around 5 min), at room temperature, without aggressive mechanical strengths or particle aggregation. The methodology employed allowed the production of alginate beads exhibiting a homogenous rMSCs and FN distribution. Encapsulated rMSCs remained viable and were released from the alginate for more than 20 days. In vivo assays were also performed, by implanting these particles in a calvarial bone defect to evaluate their potential for bone tissue regeneration. Microcomputed tomography and histological analysis results showed that this hybrid system accelerated bone regeneration process. The methodology employed had a dual role by preventing cell and FN loss and avoiding any contamination of the beads or exchange of molecules with the surrounding environment. In principle, the method used for cell encapsulation could be extended to other systems aimed to be used in tissue regeneration strategies.
- 11 January 2012
- Published by Taylor & Francis in Expert Opinion on Drug Delivery
- Vol. 9 (2) , 231-248
Production methodologies of polymeric and hydrogel particles for drug delivery applications
Introduction: Polymeric particles are ideal vehicles for controlled delivery applications due to their ability to encapsulate a variety of substances, namely low- and high-molecular mass therapeutics, antigens or DNA. Micro and nano scale spherical materials have been developed as carriers for therapies, using appropriated methodologies, in order to achieve a prolonged and controlled drug administration. Areas covered: This paper reviews the methodologies used for the production of polymeric micro/nanoparticles. Emulsions, phase separation, spray drying, ionic gelation, polyelectrolyte complexation and supercritical fluids precipitation are all widely used processes for polymeric micro/nanoencapsulation. This paper also discusses the recent developments and patents reported in this field. Other less conventional methodologies are also described, such as the use of superhydrophobic substrates to produce hydrogel and polymeric particulate biomaterials. Expert opinion: Polymeric drug delivery systems have ga...
- 11 January 2012
- Published by Taylor & Francis in Expert Opinion on Drug Delivery
- Vol. 9 (2) , 231-248
Production methodologies of polymeric and hydrogel particles for drug delivery applications
Introduction: Polymeric particles are ideal vehicles for controlled delivery applications due to their ability to encapsulate a variety of substances, namely low- and high-molecular mass therapeutics, antigens or DNA. Micro and nano scale spherical materials have been developed as carriers for therapies, using appropriated methodologies, in order to achieve a prolonged and controlled drug administration. Areas covered: This paper reviews the methodologies used for the production of polymeric micro/nanoparticles. Emulsions, phase separation, spray drying, ionic gelation, polyelectrolyte complexation and supercritical fluids precipitation are all widely used processes for polymeric micro/nanoencapsulation. This paper also discusses the recent developments and patents reported in this field. Other less conventional methodologies are also described, such as the use of superhydrophobic substrates to produce hydrogel and polymeric particulate biomaterials. Expert opinion: Polymeric drug delivery systems have ga...
- 5 February 2011
- Published by Springer Nature in Pharmaceutical Research
- Vol. 28 (6) , 1294-1305
Synthesis of Temperature-Responsive Dextran-MA/PNIPAAm Particles for Controlled Drug Delivery Using Superhydrophobic Surfaces
Purpose To implement a bioinspired methodology using superhydrophobic surfaces suitable for producing smart hydrogel beads in which the bioactive substance is introduced in the particles during their formation. Methods Several superhydrophobic surfaces, including polystyrene, aluminum and copper, were prepared. Polymeric solutions composed by photo-crosslinked dextran-methacrylated and thermal responsive poly(N-isopropylacrylamide) mixed with a protein (insulin or albumin) were dropped on the superhydrophobic surfaces, and the obtained millimetric spheres were hardened in a dry environment under UV light. Results Spherical and non-sticky hydrogels particles were formed in few minutes on the superhydrophobic surfaces. The proteins included in the liquid formulation were homogeneously distributed in the particle network. The particles exhibited temperature-sensitive swelling, porosity and protein release rate, with the responsiveness tunable by the dextran-MA/PNIPAAm weight ratio. Conclusions The proposed method permitted the preparation of smart hydrogel particles in one step with almost 100% encapsulation yield. The temperature-sensitive release profiles suggest that the obtained spherical-shaped biomaterials are suitable as protein carriers. These stimuli-responsive beads could have potential to be used in pharmaceutical or other biomedical applications, including tissue engineering and regenerative medicine.
- 5 February 2011
- Published by Springer Nature in Pharmaceutical Research
- Vol. 28 (6) , 1294-1305
Synthesis of Temperature-Responsive Dextran-MA/PNIPAAm Particles for Controlled Drug Delivery Using Superhydrophobic Surfaces
Purpose To implement a bioinspired methodology using superhydrophobic surfaces suitable for producing smart hydrogel beads in which the bioactive substance is introduced in the particles during their formation. Methods Several superhydrophobic surfaces, including polystyrene, aluminum and copper, were prepared. Polymeric solutions composed by photo-crosslinked dextran-methacrylated and thermal responsive poly(N-isopropylacrylamide) mixed with a protein (insulin or albumin) were dropped on the superhydrophobic surfaces, and the obtained millimetric spheres were hardened in a dry environment under UV light. Results Spherical and non-sticky hydrogels particles were formed in few minutes on the superhydrophobic surfaces. The proteins included in the liquid formulation were homogeneously distributed in the particle network. The particles exhibited temperature-sensitive swelling, porosity and protein release rate, with the responsiveness tunable by the dextran-MA/PNIPAAm weight ratio. Conclusions The proposed method permitted the preparation of smart hydrogel particles in one step with almost 100% encapsulation yield. The temperature-sensitive release profiles suggest that the obtained spherical-shaped biomaterials are suitable as protein carriers. These stimuli-responsive beads could have potential to be used in pharmaceutical or other biomedical applications, including tissue engineering and regenerative medicine.