Liang Tang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Liang Tang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Jingwen Hu
University of Michigan Transportation Research Institute
2 shared publications - Abhinav Saxena
GE-Research, Niskayuna, New York
1 shared publication Ann Patterson-Hine
NASA Ames Research Center, MS 269-4, Moffett Field, CA. 94035-1000
1 shared publicationGeorge Vachtsevanos
School of Electical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA. 30332
1 shared publication- Gregory Kacprzynski
Impact Technologies, a Sikorsky Innovations Company, Rochester, NY, 14623, USA
1 shared publication Jiajia Zheng
School of technology, Beijing Forestry University, Beijing 100083, PR China
1 shared publication
Latest Publications
- 10 January 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (7) , 4740-4752
Effect of alloy matrix on the quasi-static mechanical properties and deformation mechanisms of aluminum foams
- 10 January 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (7) , 4740-4752
Effect of alloy matrix on the quasi-static mechanical properties and deformation mechanisms of aluminum foams
- 9 November 2020
- Published by Wiley in International Journal of Energy Research
- Vol. 45 (3) , 4410-4428
A fast‐validated computational model for cylindrical lithium‐ion batteries under multidirectional mechanical loading
- 9 November 2020
- Published by Wiley in International Journal of Energy Research
- Vol. 45 (3) , 4410-4428
A fast‐validated computational model for cylindrical lithium‐ion batteries under multidirectional mechanical loading
- 13 July 2020
- Published by Springer Nature in Cognitive Neurodynamics
- Vol. 15 (1) , 169-179
End-to-end face parsing via interlinked convolutional neural networks
Face parsing is an important computer vision task that requires accurate pixel segmentation of facial parts (such as eyes, nose, mouth, etc.), providing a basis for further face analysis, modification, and other applications. Interlinked Convolutional Neural Networks (iCNN) was proved to be an effective two-stage model for face parsing. However, the original iCNN was trained separately in two stages, limiting its performance. To solve this problem, we introduce a simple, end-to-end face parsing framework: STN-aided iCNN(STN-iCNN), which extends the iCNN by adding a Spatial Transformer Network (STN) between the two isolated stages. The STN-iCNN uses the STN to provide a trainable connection to the original two-stage iCNN pipeline, making end-to-end joint training possible. Moreover, as a by-product, STN also provides more precise cropped parts than the original cropper. Due to these two advantages, our approach significantly improves the accuracy of the original model. Our model achieved competitive performance on the Helen Dataset, the standard face parsing dataset. It also achieved superior performance on CelebAMask-HQ dataset, proving its good generalization. Our code has been released at https://github.com/aod321/STN-iCNN.
- 13 July 2020
- Published by Springer Nature in Cognitive Neurodynamics
- Vol. 15 (1) , 169-179
End-to-end face parsing via interlinked convolutional neural networks
Face parsing is an important computer vision task that requires accurate pixel segmentation of facial parts (such as eyes, nose, mouth, etc.), providing a basis for further face analysis, modification, and other applications. Interlinked Convolutional Neural Networks (iCNN) was proved to be an effective two-stage model for face parsing. However, the original iCNN was trained separately in two stages, limiting its performance. To solve this problem, we introduce a simple, end-to-end face parsing framework: STN-aided iCNN(STN-iCNN), which extends the iCNN by adding a Spatial Transformer Network (STN) between the two isolated stages. The STN-iCNN uses the STN to provide a trainable connection to the original two-stage iCNN pipeline, making end-to-end joint training possible. Moreover, as a by-product, STN also provides more precise cropped parts than the original cropper. Due to these two advantages, our approach significantly improves the accuracy of the original model. Our model achieved competitive performance on the Helen Dataset, the standard face parsing dataset. It also achieved superior performance on CelebAMask-HQ dataset, proving its good generalization. Our code has been released at https://github.com/aod321/STN-iCNN.
- 1 March 2020
- Published by Elsevier in Accident Analysis & Prevention
- Vol. 136, 105400
A numerical investigation of factors affecting lumbar spine injuries in frontal crashes
- 1 March 2020
- Published by Elsevier in Accident Analysis & Prevention
- Vol. 136, 105400
A numerical investigation of factors affecting lumbar spine injuries in frontal crashes
- Open Access
- 17 April 2018
- Published by Wiley in Applied Bionics and Biomechanics
- Vol. 2018, 1-8
A Numerical Investigation of Risk Factors Affecting Lumbar Spine Injuries Using a Detailed Lumbar Model
Recent field data showed that lumbar spine fractures occurred more frequently in late model vehicles than early ones in frontal crashes. However, the lumbar spine designs of the current crash test dummies are not accurate in human anatomy and have not been validated against any human/cadaver impact responses. In addition, the lumbar spines of finite element (FE) human models, including GHBMC and THUMS, have never been validated previously against cadaver tests. Therefore, this study developed a detailed FE lumbar spine model and validated it against cadaveric tests. To investigate the mechanism of lumbar spine injury in frontal crashes, effects of changing the coefficient of friction (COF), impact velocity, cushion thickness and stiffness, and cushion angle on the risk of lumbar spine injuries were analyzed based on a Taguchi array of design of experiments. The results showed that impact velocity is the most important factor in determining the risk of lumbar spine fracture (). After controlling the impact velocity, increases in the cushion thickness can effectively reduce the risk of lumbar spine fracture ().- 17 April 2018
- Published by Wiley in Applied Bionics and Biomechanics
- Vol. 2018, 1-8
Open AccessA Numerical Investigation of Risk Factors Affecting Lumbar Spine Injuries Using a Detailed Lumbar Model
Recent field data showed that lumbar spine fractures occurred more frequently in late model vehicles than early ones in frontal crashes. However, the lumbar spine designs of the current crash test dummies are not accurate in human anatomy and have not been validated against any human/cadaver impact responses. In addition, the lumbar spines of finite element (FE) human models, including GHBMC and THUMS, have never been validated previously against cadaver tests. Therefore, this study developed a detailed FE lumbar spine model and validated it against cadaveric tests. To investigate the mechanism of lumbar spine injury in frontal crashes, effects of changing the coefficient of friction (COF), impact velocity, cushion thickness and stiffness, and cushion angle on the risk of lumbar spine injuries were analyzed based on a Taguchi array of design of experiments. The results showed that impact velocity is the most important factor in determining the risk of lumbar spine fracture (). After controlling the impact velocity, increases in the cushion thickness can effectively reduce the risk of lumbar spine fracture (). - Open Access
- 26 July 2017
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 12 (7) , e0181882
Homogenized modeling methodology for 18650 lithium-ion battery module under large deformation
Effective lithium-ion battery module modeling has become a bottleneck for full-size electric vehicle crash safety numerical simulation. Modeling every single cell in detail would be costly. However, computational accuracy could be lost if the module is modeled by using a simple bulk material or rigid body. To solve this critical engineering problem, a general method to establish a computational homogenized model for the cylindrical battery module is proposed. A single battery cell model is developed and validated through radial compression and bending experiments. To analyze the homogenized mechanical properties of the module, a representative unit cell (RUC) is extracted with the periodic boundary condition applied on it. An elastic–plastic constitutive model is established to describe the computational homogenized model for the module. Two typical packing modes, i.e., cubic dense packing and hexagonal packing for the homogenized equivalent battery module (EBM) model, are targeted for validation compression tests, as well as the models with detailed single cell description. Further, the homogenized EBM model is confirmed to agree reasonably well with the detailed battery module (DBM) model for different packing modes with a length scale of up to 15 × 15 cells and 12% deformation where the short circuit takes place. The suggested homogenized model for battery module makes way for battery module and pack safety evaluation for full-size electric vehicle crashworthiness analysis.
- 26 July 2017
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 12 (7) , e0181882
Open AccessHomogenized modeling methodology for 18650 lithium-ion battery module under large deformation
Effective lithium-ion battery module modeling has become a bottleneck for full-size electric vehicle crash safety numerical simulation. Modeling every single cell in detail would be costly. However, computational accuracy could be lost if the module is modeled by using a simple bulk material or rigid body. To solve this critical engineering problem, a general method to establish a computational homogenized model for the cylindrical battery module is proposed. A single battery cell model is developed and validated through radial compression and bending experiments. To analyze the homogenized mechanical properties of the module, a representative unit cell (RUC) is extracted with the periodic boundary condition applied on it. An elastic–plastic constitutive model is established to describe the computational homogenized model for the module. Two typical packing modes, i.e., cubic dense packing and hexagonal packing for the homogenized equivalent battery module (EBM) model, are targeted for validation compression tests, as well as the models with detailed single cell description. Further, the homogenized EBM model is confirmed to agree reasonably well with the detailed battery module (DBM) model for different packing modes with a length scale of up to 15 × 15 cells and 12% deformation where the short circuit takes place. The suggested homogenized model for battery module makes way for battery module and pack safety evaluation for full-size electric vehicle crashworthiness analysis.
- 1 August 2012
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 226 (4) , 281-297
A calculation method of joint forces for a suspension considering nonlinear elasticity of bushings
The forces and/or moments applied to a ball joint and a bushing in one suspension are important loads for the design or fatigue tests of control arms, trailing bars and steering knuckles. Taking a double wishbone suspension as one studying example, a modeling and calculation method for obtaining the forces applied to the ball joints and the bushings, and moments applied to the bushings are proposed and developed in this article. In modeling of a suspension, a bushing is modeled with three translational stiffness and three torsional stiffness along and around three orthogonal axes. The force (moment) versus displacement (angle) along (around) one axis is nonlinear and is simplified as piecewise linear at five sections. The joint forces and moments for ball joints and bushings of a double wishbone suspension system are calculated with the proposed method in this article, and compared with that obtained using two conventional methods (method I and method II) when a vehicle runs in typical and extreme driving conditions. Conventional method I simplifies the connections between the control arm and body as rigid link. Conventional method II assumes that the control arm links with the body using bushings, in which the bushings are modeled as three linear stiffness along three orthogonal axes. The calculation and comparison demonstrate that the bushing nonlinear and rotational stiffness must be modeled for precise calculation of ball joint force and moments, especially when a vehicle runs in extreme driving conditions.
- 1 August 2012
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics
- Vol. 226 (4) , 281-297
A calculation method of joint forces for a suspension considering nonlinear elasticity of bushings
The forces and/or moments applied to a ball joint and a bushing in one suspension are important loads for the design or fatigue tests of control arms, trailing bars and steering knuckles. Taking a double wishbone suspension as one studying example, a modeling and calculation method for obtaining the forces applied to the ball joints and the bushings, and moments applied to the bushings are proposed and developed in this article. In modeling of a suspension, a bushing is modeled with three translational stiffness and three torsional stiffness along and around three orthogonal axes. The force (moment) versus displacement (angle) along (around) one axis is nonlinear and is simplified as piecewise linear at five sections. The joint forces and moments for ball joints and bushings of a double wishbone suspension system are calculated with the proposed method in this article, and compared with that obtained using two conventional methods (method I and method II) when a vehicle runs in typical and extreme driving conditions. Conventional method I simplifies the connections between the control arm and body as rigid link. Conventional method II assumes that the control arm links with the body using bushings, in which the bushings are modeled as three linear stiffness along three orthogonal axes. The calculation and comparison demonstrate that the bushing nonlinear and rotational stiffness must be modeled for precise calculation of ball joint force and moments, especially when a vehicle runs in extreme driving conditions.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1095323X,p. 1-11
Simulation-based Design and Validation of Automated Contingency Management for Propulsion Systems
Automated contingency management (ACM), or the ability to confidently and autonomously adapt to fault and/or contingency conditions with the goal of still achieving mission objectives, can be considered the ultimate technological goal of a health management system. To establish confidence on the ACM system, objective performance evaluations should be executed. The need for verification and validation (V&V) techniques for ACM has also been specifically identified by DOD agencies and within the NASA community recently. This paper presents a general process and related techniques for developing and validating ACM systems for advanced propulsion systems. A novel ACM modeling paradigm, optimization-based ACM strategies, V&V approaches and performance metrics are developed. While some well-established formal methods such as model checking techniques are applicable to some sub-problems, this research has been more focused on innovative informal methods that attempt to address ACM performance requirements, optimality, robustness, etc. A pressure fed, monopropellant propulsion system for a small space flight vehicle is utilized as initial proof-of-concept implementation for the proposed techniques and preliminary simulation results are presented.
- 1 January 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 1095323X,p. 1-11
Simulation-based Design and Validation of Automated Contingency Management for Propulsion Systems
Automated contingency management (ACM), or the ability to confidently and autonomously adapt to fault and/or contingency conditions with the goal of still achieving mission objectives, can be considered the ultimate technological goal of a health management system. To establish confidence on the ACM system, objective performance evaluations should be executed. The need for verification and validation (V&V) techniques for ACM has also been specifically identified by DOD agencies and within the NASA community recently. This paper presents a general process and related techniques for developing and validating ACM systems for advanced propulsion systems. A novel ACM modeling paradigm, optimization-based ACM strategies, V&V approaches and performance metrics are developed. While some well-established formal methods such as model checking techniques are applicable to some sub-problems, this research has been more focused on innovative informal methods that attempt to address ACM performance requirements, optimality, robustness, etc. A pressure fed, monopropellant propulsion system for a small space flight vehicle is utilized as initial proof-of-concept implementation for the proposed techniques and preliminary simulation results are presented.