Eadala Sarath Yadav
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Eadala Sarath Yadav has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Thirunavukkarasu Indiran
Manipal Institute of technology, Manipal Academy of Higher Education
6 shared publications Thirunavukkarasu Indiran
Manipal Institute of Technology Manipal Academy of Higher Education (MAHE), Manipal, India
3 shared publicationsS. Shanmuga Priya
Department of Chemical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal 576104, India
2 shared publicationsC. Shreesha
Department of Instrumentation and Control, Manipal Institute of Technology, Manipal University, Manipal, India
1 shared publicationGautham Jeppu
Department of Chemical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal 576104, India
1 shared publicationGiuseppe Fedele
Department of Informatics, Modeling, Electronics and Systems Engineering, University of Calabria, 87036 Rende (CS), Italy
1 shared publication
Latest Publications
- Open Access
- 3 May 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (19) , 16341-16351
Wiener-Neural-Network-Based Modeling and Validation of Generalized Predictive Control on a Laboratory-Scale Batch Reactor
Batch reactors are large vessels in which chemical reactions take place. They are mostly found to be used in process control industries for processes such as reactant mixing, waste treatment of leather byproducts, and liquid extraction. Modeling and controlling of these systems are complex due to their highly nonlinear nature. The Wiener neural network (WNN) is employed in this work to predict and track the temperature profile of a batch reactor successfully. WNN is different from artificial neural networks in various aspects, mainly its structure. The brief methodology that was deployed to complete this work consisted of two parts. The first part is modeling the WNN-based batch reactor using the provided input-output data set. The input is feed given to the reactor, and the reactor temperature needs to be maintained in line with the optimal profile. The objective in this part is to train the neural network to efficiently track the nonlinear temperature profile that is provided from the data set. The second part is designing a generalized predictive controller (GPC) using the data obtained from modeling the reactor to successfully track any arbitrary temperature profile. Therefore, this work presents the experimental modeling of a batch reactor and validation of a WNN-based GPC for temperature profile tracking.
- 3 May 2022
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 7 (19) , 16341-16351
Open AccessWiener-Neural-Network-Based Modeling and Validation of Generalized Predictive Control on a Laboratory-Scale Batch Reactor
Batch reactors are large vessels in which chemical reactions take place. They are mostly found to be used in process control industries for processes such as reactant mixing, waste treatment of leather byproducts, and liquid extraction. Modeling and controlling of these systems are complex due to their highly nonlinear nature. The Wiener neural network (WNN) is employed in this work to predict and track the temperature profile of a batch reactor successfully. WNN is different from artificial neural networks in various aspects, mainly its structure. The brief methodology that was deployed to complete this work consisted of two parts. The first part is modeling the WNN-based batch reactor using the provided input-output data set. The input is feed given to the reactor, and the reactor temperature needs to be maintained in line with the optimal profile. The objective in this part is to train the neural network to efficiently track the nonlinear temperature profile that is provided from the data set. The second part is designing a generalized predictive controller (GPC) using the data obtained from modeling the reactor to successfully track any arbitrary temperature profile. Therefore, this work presents the experimental modeling of a batch reactor and validation of a WNN-based GPC for temperature profile tracking.
- Open Access
- 21 June 2021
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (26) , 16714-16721
Data-Driven Modeling of a Pilot Plant Batch Reactor and Validation of a Nonlinear Model Predictive Controller for Dynamic Temperature Profile Tracking
- 21 June 2021
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (26) , 16714-16721
Open AccessData-Driven Modeling of a Pilot Plant Batch Reactor and Validation of a Nonlinear Model Predictive Controller for Dynamic Temperature Profile Tracking
- Open Access
- 31 December 2020
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (2) , 1697-1708
Optimal Energy Consumption of the Distillation Process and Its Product Purity Analysis Using Ultraviolet Spectroscopy
- 31 December 2020
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 6 (2) , 1697-1708
Open AccessOptimal Energy Consumption of the Distillation Process and Its Product Purity Analysis Using Ultraviolet Spectroscopy
- Open Access
- 5 December 2019
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 4 (25) , 21230-21241
Parameter Estimation and an Extended Predictive-Based Tuning Method for a Lab-Scale Distillation Column
The present study proposes a new PI controller tuning method using extended predictive control (EPC). The PI controller parameter values are calculated using the EPC controller output and its closed-loop response. This provides a simple and an effective tuning strategy which results in an improved closed-loop response compared to conventional tuning methods. The tuning methodology is applicable for single input single output and multi input multi output stable processes. Simulation and experimental results reveal the efficacy of the method under plant uncertainty conditions.
- 5 December 2019
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 4 (25) , 21230-21241
Open AccessParameter Estimation and an Extended Predictive-Based Tuning Method for a Lab-Scale Distillation Column
The present study proposes a new PI controller tuning method using extended predictive control (EPC). The PI controller parameter values are calculated using the EPC controller output and its closed-loop response. This provides a simple and an effective tuning strategy which results in an improved closed-loop response compared to conventional tuning methods. The tuning methodology is applicable for single input single output and multi input multi output stable processes. Simulation and experimental results reveal the efficacy of the method under plant uncertainty conditions.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
PRBS Based Identification and Conditional Control for an Optimal Operation of a Pilot Plant Binary Distillation Column
Input signal design is a crucial part in data driven based system identification. Input is set to excite in such a way that the effect of output should be larger than those responses caused by sensor noise. Input signal generation should contain amplitude, rate of input change (Frequency), bias and variance. One such signal is Pseudo Random Binary Sequence (PRBS) input signal. This papers deals with the system identification of a binary distillation column with temperature as variable of interest, heater voltage and reflux flow rate as its manipulated inputs. Based on the requirement of manipulated input, conditional switch is assigned such that manipulated inputs (Heater and Reflux) switches as a function of error. It is observed that this approach improves the system performance and reduces the operational cost. Result depicts the efficiency of the methodology and control loop structure.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
PRBS Based Identification and Conditional Control for an Optimal Operation of a Pilot Plant Binary Distillation Column
Input signal design is a crucial part in data driven based system identification. Input is set to excite in such a way that the effect of output should be larger than those responses caused by sensor noise. Input signal generation should contain amplitude, rate of input change (Frequency), bias and variance. One such signal is Pseudo Random Binary Sequence (PRBS) input signal. This papers deals with the system identification of a binary distillation column with temperature as variable of interest, heater voltage and reflux flow rate as its manipulated inputs. Based on the requirement of manipulated input, conditional switch is assigned such that manipulated inputs (Heater and Reflux) switches as a function of error. It is observed that this approach improves the system performance and reduces the operational cost. Result depicts the efficiency of the methodology and control loop structure.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 450-454
Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column
In a distillation column pressure is normally regulated by the vapor-condenser cooling water flow rate. If the pressure is high, increase the water flow to condense vapor faster. The reflux rate, feed rate, change in composition set point, boil-up rate are some of the factors that influences the pressure inside the column. The pressure also affects the speed of vapor through the column and internal reflux. The temperature inside the column and pressure are interdependent, so the interaction between these parameters are high. The objective is to control the bottom tray temperature (T1) and column pressure, nominally by manipulating the reflux flow and boilup rate.
- 1 April 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 450-454
Modeling and Control of Tray Temperature along with Column Pressure in a Pilot Plant Distillation Column
In a distillation column pressure is normally regulated by the vapor-condenser cooling water flow rate. If the pressure is high, increase the water flow to condense vapor faster. The reflux rate, feed rate, change in composition set point, boil-up rate are some of the factors that influences the pressure inside the column. The pressure also affects the speed of vapor through the column and internal reflux. The temperature inside the column and pressure are interdependent, so the interaction between these parameters are high. The objective is to control the bottom tray temperature (T1) and column pressure, nominally by manipulating the reflux flow and boilup rate.
- 1 January 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 17, 16-25
PRBS based model identification and GPC PID control design for MIMO Process
- 1 January 2019
- Published by Elsevier in Materials Today: Proceedings
- Vol. 17, 16-25
PRBS based model identification and GPC PID control design for MIMO Process
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Implementation of fuzzy control for a nonlinear system — Conical level process
Fuzzy logic is the trending control strategy and ideal in its performance to the real world of control. It has been implemented in most of the control fields because of its expertise in fault tolerance, knowledge representation, nonlinearity, uncertainty, real time operation etc. In this paper mamdani type of fuzzy controller is considered for controlling nonlinear conical tank process. The identification of conical tank system is performed by two point method and fuzzy controller is implemented. The results of fuzzy controller is compared with AMIGO (Approximate M constrained Integral Gain Optimization) and conventional controllers for evaluating its performance indices like IAE, ITAE and ISE using MATLAB simulation environment and real time experimentation was also carried out. It is also observed that the fuzzy controllers perform better than that of AMIGO PI and conventional PI controller.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Implementation of fuzzy control for a nonlinear system — Conical level process
Fuzzy logic is the trending control strategy and ideal in its performance to the real world of control. It has been implemented in most of the control fields because of its expertise in fault tolerance, knowledge representation, nonlinearity, uncertainty, real time operation etc. In this paper mamdani type of fuzzy controller is considered for controlling nonlinear conical tank process. The identification of conical tank system is performed by two point method and fuzzy controller is implemented. The results of fuzzy controller is compared with AMIGO (Approximate M constrained Integral Gain Optimization) and conventional controllers for evaluating its performance indices like IAE, ITAE and ISE using MATLAB simulation environment and real time experimentation was also carried out. It is also observed that the fuzzy controllers perform better than that of AMIGO PI and conventional PI controller.
- Open Access
- 21 September 2016
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 9 (34)
Optimal Actuation of Controller using Predictive PI for Nonlinear Level Process
Background/Objective: Energy consumption of the actuator illustrates the performance of controller on the process. Objective of this paper is to prove how predictive control approach minimizes the energy utilization of actuator in nonlinear process (conical tank level process). Method/Statistical Analysis: Conical tank is divided into three operating regions and model identification using two-point method has been carried out at oneselected operating region. Efficiency of controller is validated by subjecting it with the identified model at all operating regions. Prediction filter which acts as dead time compensation was introduced in cascade with controller. Findings: Simulation and experimental results validates the approach. The effectiveness of the design has been compared with the advanced control schemes. Application and Improvements: This methodology can be implemented in the nonlinear processes with dead time. It can be applicable for the processes where energy consumption of actuator is considered as key objective.
- 21 September 2016
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 9 (34)
Open AccessOptimal Actuation of Controller using Predictive PI for Nonlinear Level Process
Background/Objective: Energy consumption of the actuator illustrates the performance of controller on the process. Objective of this paper is to prove how predictive control approach minimizes the energy utilization of actuator in nonlinear process (conical tank level process). Method/Statistical Analysis: Conical tank is divided into three operating regions and model identification using two-point method has been carried out at oneselected operating region. Efficiency of controller is validated by subjecting it with the identified model at all operating regions. Prediction filter which acts as dead time compensation was introduced in cascade with controller. Findings: Simulation and experimental results validates the approach. The effectiveness of the design has been compared with the advanced control schemes. Application and Improvements: This methodology can be implemented in the nonlinear processes with dead time. It can be applicable for the processes where energy consumption of actuator is considered as key objective.
- Open Access
- 24 March 2016
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 9 (11)
Servo Mechanism Technique based Anti-Reset Windup PI Controller for Pressure Process Station
Background/Objectives: In this paper a new architecture is followed which is based on manipulating feedback structure for pressure process. Methods/Statistical Analysis: This work copes with the research based on anti-reset windup mechanism. Mathematical Modeling of pressure station is carried out using two-point method. Windup action is being complication in FOPDT process, thereforedesigning a controller for such problem is always a big challenge for control engineers. As a part of controller design direct synthesis method has been used.Apart from controller design, architecture of system will also influence the system performance. Tending towards architectural manipulationa new structure has been followed. Findings: Result shows the significance and positive approach towards the proposed model for pressure processin both simulation and real time. Controller action can be optimized in a reliable way and energy utilization of actuator gradually reduced. Applications/Improvements: In some real time nonlinear processes windup action manipulates plant process more than required limit, where process leads to saturation. In such scenarios the
- 24 March 2016
- Published by Indian Society for Education and Environment in Indian Journal of Science and Technology
- Vol. 9 (11)
Open AccessServo Mechanism Technique based Anti-Reset Windup PI Controller for Pressure Process Station
Background/Objectives: In this paper a new architecture is followed which is based on manipulating feedback structure for pressure process. Methods/Statistical Analysis: This work copes with the research based on anti-reset windup mechanism. Mathematical Modeling of pressure station is carried out using two-point method. Windup action is being complication in FOPDT process, thereforedesigning a controller for such problem is always a big challenge for control engineers. As a part of controller design direct synthesis method has been used.Apart from controller design, architecture of system will also influence the system performance. Tending towards architectural manipulationa new structure has been followed. Findings: Result shows the significance and positive approach towards the proposed model for pressure processin both simulation and real time. Controller action can be optimized in a reliable way and energy utilization of actuator gradually reduced. Applications/Improvements: In some real time nonlinear processes windup action manipulates plant process more than required limit, where process leads to saturation. In such scenarios the