Marek Henczka
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marek Henczka has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Jerzy Bałdyga
Faculty of Chemical and Process Engineering, Warsaw University of Technology, ul. Waryńskiego 1, 00-645 Warszawa, Poland
7 shared publications - Jan Krzysztoforski
Faculty of Chemical and Process Engineering Warsaw University of Technology Warynskiego 1 00-645 Warsaw Poland
5 shared publications - Małgorzata Djas
Warsaw University of Technology, Faculty of Chemical and Process Engineering, Waryńskiego 1, 00-645, Warsaw, Poland
5 shared publications Boris Yu. Shekunov
2 shared publicationsJan Krzysztoforski
2 shared publications- Katarzyna Kosowska
Faculty of Chemical and Process Engineering, Warsaw University of Technology, Waryńskiego 1, 00-645 Warsaw, Poland
2 shared publications
Latest Publications
- 30 March 2026
- Published by Polish Academy of Sciences Chancellery in Chemical and Process Engineering: New Frontiers
- p. 123
Ultrasound-assisted direct exfoliation using supercritical carbon dioxide as a novel method of graphene flake production
In the present study, a new method involving ultrasound-assisted direct exfoliation with supercritical carbon dioxide is reported for graphene flake production. The influence of the starting material type – graphite (natural and expanded graphite) and duration of ultrasound treatment on the quality of the produced graphene-based material was assessed. By conducting scanning electron microscopy and Raman spectroscopy, it was found that the use of expanded graphite combined with 5 h of sonication in supercritical carbon dioxide yielded graphene nanoplatelets.
- 30 March 2026
- Published by Polish Academy of Sciences Chancellery in Chemical and Process Engineering: New Frontiers
- p. 123
Ultrasound-assisted direct exfoliation using supercritical carbon dioxide as a novel method of graphene flake production
In the present study, a new method involving ultrasound-assisted direct exfoliation with supercritical carbon dioxide is reported for graphene flake production. The influence of the starting material type – graphite (natural and expanded graphite) and duration of ultrasound treatment on the quality of the produced graphene-based material was assessed. By conducting scanning electron microscopy and Raman spectroscopy, it was found that the use of expanded graphite combined with 5 h of sonication in supercritical carbon dioxide yielded graphene nanoplatelets.
- Open Access
Foaming of PCL-Based Composites Using scCO2—Biocompatibility and Evaluation for Biomedical Applications
The process of foaming poly(caprolactone)-based composite materials using supercritical carbon dioxide was analyzed, especially in terms of the biocompatibility of the resultant materials. The influence of foaming process conditions and composite material properties on the functional properties of polymer solid foams, intended for artificial scaffolds for bone cell culture, was investigated. The relationship between wettability (contact angle) and water absorption rate as a result of the application of variable conditions for the production of porous structures was presented. For the evaluation of potential cytotoxicity, the MTT and PrestoBlue tests were carried out, and animal cells (mouse fibroblasts) were cultured on the materials for nine days. There was no toxic effect of composite materials made of poly(caprolactone) containing porogen particles: hydroxyapatite, crystalline nanocellulose, and graphene oxide on cells. The desired effect of the porogens used in the foaming process on the affinity of cells to the resultant material was demonstrated. The tested materials have been shown to be biocompatible and suitable for applications in biomedical engineering.
Open AccessFoaming of PCL-Based Composites Using scCO2—Biocompatibility and Evaluation for Biomedical Applications
The process of foaming poly(caprolactone)-based composite materials using supercritical carbon dioxide was analyzed, especially in terms of the biocompatibility of the resultant materials. The influence of foaming process conditions and composite material properties on the functional properties of polymer solid foams, intended for artificial scaffolds for bone cell culture, was investigated. The relationship between wettability (contact angle) and water absorption rate as a result of the application of variable conditions for the production of porous structures was presented. For the evaluation of potential cytotoxicity, the MTT and PrestoBlue tests were carried out, and animal cells (mouse fibroblasts) were cultured on the materials for nine days. There was no toxic effect of composite materials made of poly(caprolactone) containing porogen particles: hydroxyapatite, crystalline nanocellulose, and graphene oxide on cells. The desired effect of the porogens used in the foaming process on the affinity of cells to the resultant material was demonstrated. The tested materials have been shown to be biocompatible and suitable for applications in biomedical engineering.
- Open Access
Foaming of PCL-Based Composites Using scCO2: Structure and Physical Properties
The process of foaming poly(caprolactone)-based composites using supercritical carbon dioxide was analyzed. The impact of the conditions of the solid-foam production process on the process efficiency and properties of porous structures was investigated. The novel application of various types of porogens—hydroxyapatite, nanocellulose, carboxymethylcellulose, and graphene oxide—was tested in order to modify the properties and improve the quality of solid foams, increasing their usefulness in specialized practical applications. The study showed a significant influence of the foaming process conditions on the properties of solid foams. The optimal process parameters were determined to be pressure 18 MPa, temperature 70 °C, and time 1 h in order to obtain structures with appropriate properties for applications in biomedical engineering, and the most promising material for their production was selected: a composite containing 5% hydroxyapatite or 0.2% graphene oxide.
Open AccessFoaming of PCL-Based Composites Using scCO2: Structure and Physical Properties
The process of foaming poly(caprolactone)-based composites using supercritical carbon dioxide was analyzed. The impact of the conditions of the solid-foam production process on the process efficiency and properties of porous structures was investigated. The novel application of various types of porogens—hydroxyapatite, nanocellulose, carboxymethylcellulose, and graphene oxide—was tested in order to modify the properties and improve the quality of solid foams, increasing their usefulness in specialized practical applications. The study showed a significant influence of the foaming process conditions on the properties of solid foams. The optimal process parameters were determined to be pressure 18 MPa, temperature 70 °C, and time 1 h in order to obtain structures with appropriate properties for applications in biomedical engineering, and the most promising material for their production was selected: a composite containing 5% hydroxyapatite or 0.2% graphene oxide.
- 1 August 2018
- Published by Elsevier in Separation and Purification Technology
- Vol. 201, 106-119
Reactive extraction of carboxylic acids using organic solvents and supercritical fluids: A review
- 1 August 2018
- Published by Elsevier in Separation and Purification Technology
- Vol. 201, 106-119
Reactive extraction of carboxylic acids using organic solvents and supercritical fluids: A review
- 8 February 2018
- Published by Springer Nature
- p. 231-242
Cleaning Porous Materials Using Supercritical Fluids
- 8 February 2018
- Published by Springer Nature
- p. 231-242
Cleaning Porous Materials Using Supercritical Fluids
- Open Access
- 1 December 2017
- Published by Walter de Gruyter GmbH in Chemical and Process Engineering: New Frontiers
- Vol. 38 (4) , 535-541
The influence of supercritical foaming conditions on properties of polymer scaffolds for tissue engineering
The results of experimental investigations into foaming process of poly(ε-caprolactone) using supercritical CO2 are presented. The objective of the study was to explore the aspects of fabrication of biodegradable and biocompatible scaffolds that can be applied as a temporary three-dimensional extracellular matrix analog for cells to grow into a new tissue. The influence of foaming process parameters, which have been proven previously to affect significantly scaffold bioactivity, such as pressure (8-18 MPa), temperature (323-373 K) and time of saturation (1-6 h) on microstructure and mechanical properties of produced polymer porous structures is presented. The morphology and mechanical properties of considered materials were analyzed using a scanning electron microscope (SEM), x-ray microtomography (μ-CT) and a static compression test. A precise control over porosity and morphology of obtained polymer porous structures by adjusting the foaming process parameters has been proved. The obtained poly(ε-caprolactone) solid foams prepared using scCO2 have demonstrated sufficient mechanical strength to be applied as scaffolds in tissue engineering.
- 1 December 2017
- Published by Walter de Gruyter GmbH in Chemical and Process Engineering: New Frontiers
- Vol. 38 (4) , 535-541
Open AccessThe influence of supercritical foaming conditions on properties of polymer scaffolds for tissue engineering
The results of experimental investigations into foaming process of poly(ε-caprolactone) using supercritical CO2 are presented. The objective of the study was to explore the aspects of fabrication of biodegradable and biocompatible scaffolds that can be applied as a temporary three-dimensional extracellular matrix analog for cells to grow into a new tissue. The influence of foaming process parameters, which have been proven previously to affect significantly scaffold bioactivity, such as pressure (8-18 MPa), temperature (323-373 K) and time of saturation (1-6 h) on microstructure and mechanical properties of produced polymer porous structures is presented. The morphology and mechanical properties of considered materials were analyzed using a scanning electron microscope (SEM), x-ray microtomography (μ-CT) and a static compression test. A precise control over porosity and morphology of obtained polymer porous structures by adjusting the foaming process parameters has been proved. The obtained poly(ε-caprolactone) solid foams prepared using scCO2 have demonstrated sufficient mechanical strength to be applied as scaffolds in tissue engineering.
- 27 November 2017
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 53 (4) , 655-661
Reactive extraction of succinic acid using supercritical carbon dioxide
Reactive extraction using supercritical carbon dioxide (scCO2) and tri-n-octylamine (TOA) was evaluated as a separation method of succinic acid from an aqueous solution. The reactive extraction of succinic acid was performed at varying initial acid concentrations in aqueous solution (0.07–0.45 mol∙dm−3), temperature (35–65°C) and pressure (8–16 MPa). The succinic acid separation was conducted in both batch mode and semi-continuous mode. The highest reactive extraction efficiency of approx. 62% was obtained for the process conducted in semi-continuous mode at 35°C and 16 MPa for the initial acid concentrations in aqueous phase of 0.39 mol∙dm−3.
- 27 November 2017
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 53 (4) , 655-661
Reactive extraction of succinic acid using supercritical carbon dioxide
Reactive extraction using supercritical carbon dioxide (scCO2) and tri-n-octylamine (TOA) was evaluated as a separation method of succinic acid from an aqueous solution. The reactive extraction of succinic acid was performed at varying initial acid concentrations in aqueous solution (0.07–0.45 mol∙dm−3), temperature (35–65°C) and pressure (8–16 MPa). The succinic acid separation was conducted in both batch mode and semi-continuous mode. The highest reactive extraction efficiency of approx. 62% was obtained for the process conducted in semi-continuous mode at 35°C and 16 MPa for the initial acid concentrations in aqueous phase of 0.39 mol∙dm−3.
- 1 April 2016
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 110, 154-160
Reactive extraction of acetic acid and propionic acid using supercritical carbon dioxide
- 1 April 2016
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 110, 154-160
Reactive extraction of acetic acid and propionic acid using supercritical carbon dioxide
- 1 January 2016
- Published by Elsevier in Materials Letters
- Vol. 163, 54-57
Investigation of the effect of treatment with supercritical carbon dioxide on structure and properties of polypropylene microfiltration membranes
- 1 January 2016
- Published by Elsevier in Materials Letters
- Vol. 163, 54-57
Investigation of the effect of treatment with supercritical carbon dioxide on structure and properties of polypropylene microfiltration membranes