Jiping Li
Jiping Li has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Huikai Xie
Beijing Institute of Technology
3 shared publications Victor Farm-Guoo Tseng
Department of Electrical and Computer Engineering, University of Florida, Gainesville, FL, USA
2 shared publicationsJinling Ding
1 shared publicationKhai D. T. Ngo
Department of Electrical and Computer Engineering, Virginia Polytechnic Institute and State University, Blacksburg, USA
1 shared publicationMingliang Wang
Department of Electrical and Computer Engineering, University of Florida, Gainesville, USA
1 shared publication- Qiao Chen
Wuxi WiO Technology Co. Ltd, Wuxi 214000, China
1 shared publication
Latest Publications
- Open Access
- 7 July 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 32  (5) , 3858-3867
A High-Q In-Silicon Power Inductor Designed for Wafer-Level Integration of Compact DC–DC Converters
This paper reports the design, fabrication, and characterization of a novel power inductor embedded inside a silicon substrate and fabricated at wafer level. Such power inductors in silicon (PIiS) employ high-aspect ratio silicon molds formed with deep-reactive ion etching to obtain large cross-sectional electroplated copper windings (as thick as the silicon wafers). The PIiS also utilize high-resistivity magnetic composites as the core material, in a closed flux path manner, for small core losses and low electromagnetic interference. By using copper electroplating for all of the conductors in the component, the contact resistances between the conductive layers can be minimized and the inductors' quality factor can be improved significantly. Toward the end of the fabrication process, surface bonding pads are also formed on the PIiS, leading to a compact converter packaging with IC circuitry. A square-shaped spiral inductor (of size 3 × 3 × 0.83 mm 3 ) was successfully fabricated. Large inductance (430 nH), low dc resistance (84 mΩ), and high quality factor (21) were achieved at 6 MHz. The fabricated inductor was assembled with a TI TPS62621 buck converter IC, and it achieved a maximum power conversion efficiency of 83%.
- 7 July 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 32  (5) , 3858-3867
Open AccessA High-Q In-Silicon Power Inductor Designed for Wafer-Level Integration of Compact DC–DC Converters
This paper reports the design, fabrication, and characterization of a novel power inductor embedded inside a silicon substrate and fabricated at wafer level. Such power inductors in silicon (PIiS) employ high-aspect ratio silicon molds formed with deep-reactive ion etching to obtain large cross-sectional electroplated copper windings (as thick as the silicon wafers). The PIiS also utilize high-resistivity magnetic composites as the core material, in a closed flux path manner, for small core losses and low electromagnetic interference. By using copper electroplating for all of the conductors in the component, the contact resistances between the conductive layers can be minimized and the inductors' quality factor can be improved significantly. Toward the end of the fabrication process, surface bonding pads are also formed on the PIiS, leading to a compact converter packaging with IC circuitry. A square-shaped spiral inductor (of size 3 × 3 × 0.83 mm 3 ) was successfully fabricated. Large inductance (430 nH), low dc resistance (84 mΩ), and high quality factor (21) were achieved at 6 MHz. The fabricated inductor was assembled with a TI TPS62621 buck converter IC, and it achieved a maximum power conversion efficiency of 83%.
- 1 February 2014
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 206, 1-9
An electromagnetically actuated micromirror with precise angle control for harsh environment optical switching applications
- 1 February 2014
- Published by Elsevier in Sensors and Actuators A: Physical
- Vol. 206, 1-9
An electromagnetically actuated micromirror with precise angle control for harsh environment optical switching applications
- 5 April 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 26  (5) , 1310-1315
A Surface-Mountable Microfabricated Power Inductor in Silicon for Ultracompact Power Supplies
A novel silicon-based inductor, power inductor in silicon (PIiS) has been proposed and experimentally demonstrated. The PIiS is fabricated at wafer level using a silicon-molding micromachining technique in which 200-μm-thick copper windings are embedded into a silicon substrate and both sides of the substrate are capped with a polymer-magnetic power composite. Through-silicon vias (TSVs) and copper routings are also added so that a PIiS can be directly used as a surface-mountable packaging substrate. A 3 ×3 ×0.6 mm3 PIiS with a measured inductance of 390 nH has been fabricated. The Q factor of this PIiS is 10 at 6 MHz. An ultracompact buck converter has been made by surface mounting off-shelf power ICs and capacitors on a PIiS. The buck converter is 3 ×3 ×1.2 mm3, which has successfully delivered 500 mA at 1.8 V with an 80% efficiency at 6 MHz.
- 5 April 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 26  (5) , 1310-1315
A Surface-Mountable Microfabricated Power Inductor in Silicon for Ultracompact Power Supplies
A novel silicon-based inductor, power inductor in silicon (PIiS) has been proposed and experimentally demonstrated. The PIiS is fabricated at wafer level using a silicon-molding micromachining technique in which 200-μm-thick copper windings are embedded into a silicon substrate and both sides of the substrate are capped with a polymer-magnetic power composite. Through-silicon vias (TSVs) and copper routings are also added so that a PIiS can be directly used as a surface-mountable packaging substrate. A 3 ×3 ×0.6 mm3 PIiS with a measured inductance of 390 nH has been fabricated. The Q factor of this PIiS is 10 at 6 MHz. An ultracompact buck converter has been made by surface mounting off-shelf power ICs and capacitors on a PIiS. The buck converter is 3 ×3 ×1.2 mm3, which has successfully delivered 500 mA at 1.8 V with an 80% efficiency at 6 MHz.