Çağrı Ceylan Koçak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Çağrı Ceylan Koçak has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Süleyman Koçak
Department of Chemistry, Faculty of Science & Art, Celal Bayar University, Manisa, Turkey
5 shared publications - Zekerya Dursun
Faculty of Science Department of Chemistry Ege University Bornova İzmir 35100 Turkey
4 shared publications - Deniz Elmaci
Dokuz Eylül University, Bergama Vocational School
3 shared publications - Şükriye Karabiberoğlu
Department of Chemistry, Science Faculty, Ege University, 35100, Izmir, Turkey
3 shared publications - Anil Ozirmak
DOKUZ EYLÜL ÜNİVERSİTESİ, BERGAMA MESLEK YÜKSEKOKULU
2 shared publications Burak Aslışen
Department of Chemistry, Science and Art Faculty, Manisa Celal Bayar University, Manisa, Turkey
2 shared publications
Latest Publications
- 1 September 2026
- Published by Igdir University in Journal of the Institute of Science and Technology
- Vol. 16 (3) , 1131-1144
Occupational Exposure to Formaldehyde: Research Trends and Scientific Contributions
Formaldehyde is a colorless, highly reactive volatile organic compound with a sharp odor, widely used in industrial production. Many workers are exposed to it in workplaces, leading to adverse health effects like asthma, dermatitis, and cancer. Prolonged exposure necessitates control measures and health monitoring. Bibliometric studies help understand scientific research's structure and development. This study investigated the scientific output on occupational exposure to formaldehyde using a data-driven analysis of publications obtained from Web of Science and Scopus. RStudio and VOSviewer were used for analysis, reviewing 2390 publications of 8011 authors in 3099 affiliations across 77 countries published between 1960 and 2024. The United States emerged as the most productive contributor. The analysis covered co-authorship, bibliographic coupling by countries, citation analysis, journal analysis, top authors, and term analysis. Key topics identified included occupational diseases caused by formaldehyde, air quality effects, toxicity, genotoxicity, risk analysis, and personal exposure assessments. The findings provide a broad overview of research trends and contributions in this field, highlighting areas relevant to health and safety.
- 1 September 2026
- Published by Igdir University in Journal of the Institute of Science and Technology
- Vol. 16 (3) , 1131-1144
Occupational Exposure to Formaldehyde: Research Trends and Scientific Contributions
Formaldehyde is a colorless, highly reactive volatile organic compound with a sharp odor, widely used in industrial production. Many workers are exposed to it in workplaces, leading to adverse health effects like asthma, dermatitis, and cancer. Prolonged exposure necessitates control measures and health monitoring. Bibliometric studies help understand scientific research's structure and development. This study investigated the scientific output on occupational exposure to formaldehyde using a data-driven analysis of publications obtained from Web of Science and Scopus. RStudio and VOSviewer were used for analysis, reviewing 2390 publications of 8011 authors in 3099 affiliations across 77 countries published between 1960 and 2024. The United States emerged as the most productive contributor. The analysis covered co-authorship, bibliographic coupling by countries, citation analysis, journal analysis, top authors, and term analysis. Key topics identified included occupational diseases caused by formaldehyde, air quality effects, toxicity, genotoxicity, risk analysis, and personal exposure assessments. The findings provide a broad overview of research trends and contributions in this field, highlighting areas relevant to health and safety.
- 31 August 2026
- Published by Bulent Evcevit University in Karaelmas İş Sağlığı ve Güvenliği Dergisi
- Vol. 10 (2) , 117-132
Mesleki Kimyevi Risk: Benzen
Benzen, endüstride geniş kullanım alanına sahip, yüksek çözünürlük kapasiteli ancak alevlenir ve toksik özellikleri nedeniyle ciddi iş sağlığı riskleri barındıran organik bir maddedir. Özellikle kan kanseri, solunum sistemi rahatsızlıkları ve organ hasarlarına yol açabilen bu kimyevi maddenin yönetimi, iş yerlerinde doğru risk önleme stratejilerinin geliştirilmesi açısından kritiktir. Bu doğrultuda, küresel bir halk sağlığı sorunu olan ve yüksek toksisitesi ile bilinen mesleki benzen maruziyeti konusunda 1980 yılından itibaren gerçekleştirilen bilimsel araştırma eğilimleri bibliyometrik analizle kapsamlı bir şekilde incelenmiştir. Web of Science™ (WoS) veri tabanında başlık, konu, anahtar kelimeler ve özet kısımlarında “mesleki benzen maruziyeti” ve “iş yerinde benzen maruziyeti” ifadeleri aranarak belirli sınırlamalar uygulanmış ve toplam 2198 yayın değerlendirmeye alınmıştır. Araştırma sonuçları, bilimsel çalışmaların sürekli arttığını ve multidisipliner bir yapı sergilediğini göstermektedir. Ancak mevcut birikimin çoğunlukla epidemiyolojik ilişkiler, biyolojik izleme ve çevresel toksisiteye odaklandığı; teknik risk değerlendirmesi ve İş Sağlığı ve Güvenliği (İSG) uygulamalarının ise sınırlı kaldığı tespit edilmiştir. Elde edilen bulgular, gelecekteki çalışmaların teknik risk yönetimi ve İSG politikalarına yoğunlaşmasının uygulama düzeyinde daha etkin sonuçlar doğuracağını göstermekte ve hem ulusal hem de uluslararası literatür için yol gösterici bir zemin oluşturmaktadır.
- 31 August 2026
- Published by Bulent Evcevit University in Karaelmas İş Sağlığı ve Güvenliği Dergisi
- Vol. 10 (2) , 117-132
Mesleki Kimyevi Risk: Benzen
Benzen, endüstride geniş kullanım alanına sahip, yüksek çözünürlük kapasiteli ancak alevlenir ve toksik özellikleri nedeniyle ciddi iş sağlığı riskleri barındıran organik bir maddedir. Özellikle kan kanseri, solunum sistemi rahatsızlıkları ve organ hasarlarına yol açabilen bu kimyevi maddenin yönetimi, iş yerlerinde doğru risk önleme stratejilerinin geliştirilmesi açısından kritiktir. Bu doğrultuda, küresel bir halk sağlığı sorunu olan ve yüksek toksisitesi ile bilinen mesleki benzen maruziyeti konusunda 1980 yılından itibaren gerçekleştirilen bilimsel araştırma eğilimleri bibliyometrik analizle kapsamlı bir şekilde incelenmiştir. Web of Science™ (WoS) veri tabanında başlık, konu, anahtar kelimeler ve özet kısımlarında “mesleki benzen maruziyeti” ve “iş yerinde benzen maruziyeti” ifadeleri aranarak belirli sınırlamalar uygulanmış ve toplam 2198 yayın değerlendirmeye alınmıştır. Araştırma sonuçları, bilimsel çalışmaların sürekli arttığını ve multidisipliner bir yapı sergilediğini göstermektedir. Ancak mevcut birikimin çoğunlukla epidemiyolojik ilişkiler, biyolojik izleme ve çevresel toksisiteye odaklandığı; teknik risk değerlendirmesi ve İş Sağlığı ve Güvenliği (İSG) uygulamalarının ise sınırlı kaldığı tespit edilmiştir. Elde edilen bulgular, gelecekteki çalışmaların teknik risk yönetimi ve İSG politikalarına yoğunlaşmasının uygulama düzeyinde daha etkin sonuçlar doğuracağını göstermekte ve hem ulusal hem de uluslararası literatür için yol gösterici bir zemin oluşturmaktadır.
- 27 August 2025
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 17 (36) , 7156-7166
Electropolymerized poly(Congo red) on graphene oxide: a novel platform for electrochemical sensing of acyclovir
In this work, a composite electrode was prepared by the electropolymerization of Congo red on a graphene oxide glassy carbon electrode (PCR/GO/GCE). The modified electrode surface was characterized by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The electrochemical behavior of acyclovir (ACV), a widely used antiviral drug, was investigated using CV and DPV techniques in pH 5.1 Britton–Robinson (BR) buffer. Selective and stable responses were exhibited by the developed electrode, which provided a 45-fold higher current value compared to the bare GCE. DPV studies revealed linear ranges between 0.01 μmol L−1 and 1.3 μmol L−1 and between 2.2 and 18 μmol L−1, with a detection limit of 3.4 nmol L−1. The practical applicability of PCR/GO/GCE was demonstrated in pharmaceutical real sample analysis with high accuracy.
- 27 August 2025
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 17 (36) , 7156-7166
Electropolymerized poly(Congo red) on graphene oxide: a novel platform for electrochemical sensing of acyclovir
In this work, a composite electrode was prepared by the electropolymerization of Congo red on a graphene oxide glassy carbon electrode (PCR/GO/GCE). The modified electrode surface was characterized by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The electrochemical behavior of acyclovir (ACV), a widely used antiviral drug, was investigated using CV and DPV techniques in pH 5.1 Britton–Robinson (BR) buffer. Selective and stable responses were exhibited by the developed electrode, which provided a 45-fold higher current value compared to the bare GCE. DPV studies revealed linear ranges between 0.01 μmol L−1 and 1.3 μmol L−1 and between 2.2 and 18 μmol L−1, with a detection limit of 3.4 nmol L−1. The practical applicability of PCR/GO/GCE was demonstrated in pharmaceutical real sample analysis with high accuracy.
- 16 June 2025
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 17 (27) , 5662-5671
Simultaneous and sensitive determination of hydroquinone, catechol, and resorcinol with a palladium nanoparticles/poly(bromocresol green) modified glassy carbon electrode
In this study, catechol (CC), hydroquinone (HQ), and resorcinol (RC) – dihydroxybenzene isomers – were determined simultaneously using the composite surface. The proposed material was prepared via electrochemical polymerization of Bromocresol Green (BCG) followed by electrodeposition of palladium nanoparticles (Pd). The developed electrode was characterized using X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectroscopy (EIS), and X-ray Energy Dispersive Spectroscopy (EDX) techniques. Electrochemical measurements were performed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) in pH 7 phosphate buffer solution. The Pd nanoparticle deposited polymerized BCG-modified glassy carbon electrode (Pd/Poly(BCG)/GCE) displayed enhanced current sensitivity for all three isomers compared to a bare GCE and Poly(BCG)/GCE. Thus, this was attributed to the synergistic effect of the improved active surface area of Poly(BCG) and the unique properties of Pd nanoparticles. Under optimized conditions, three well-separated oxidation peaks were achieved by DPV for HQ (19 mV), CC (130 mV), and RC (430 mV) at the Pd/Poly(BCG)/GCE during the simultaneous concentration change of the isomer mixture. The limit of detection values (S/N = 3) were found to be 89 nM, 74 nM, and 98 nM for HQ, CC, and RC, respectively. Thus, the high sensitivity, adequate reproducibility, good stability, and easy preparation of the Pd/Poly(BCG)/GCE surface made it a promising candidate for the determination of dihydroxybenzene isomers.
- 16 June 2025
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 17 (27) , 5662-5671
Simultaneous and sensitive determination of hydroquinone, catechol, and resorcinol with a palladium nanoparticles/poly(bromocresol green) modified glassy carbon electrode
In this study, catechol (CC), hydroquinone (HQ), and resorcinol (RC) – dihydroxybenzene isomers – were determined simultaneously using the composite surface. The proposed material was prepared via electrochemical polymerization of Bromocresol Green (BCG) followed by electrodeposition of palladium nanoparticles (Pd). The developed electrode was characterized using X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Electrochemical Impedance Spectroscopy (EIS), and X-ray Energy Dispersive Spectroscopy (EDX) techniques. Electrochemical measurements were performed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) in pH 7 phosphate buffer solution. The Pd nanoparticle deposited polymerized BCG-modified glassy carbon electrode (Pd/Poly(BCG)/GCE) displayed enhanced current sensitivity for all three isomers compared to a bare GCE and Poly(BCG)/GCE. Thus, this was attributed to the synergistic effect of the improved active surface area of Poly(BCG) and the unique properties of Pd nanoparticles. Under optimized conditions, three well-separated oxidation peaks were achieved by DPV for HQ (19 mV), CC (130 mV), and RC (430 mV) at the Pd/Poly(BCG)/GCE during the simultaneous concentration change of the isomer mixture. The limit of detection values (S/N = 3) were found to be 89 nM, 74 nM, and 98 nM for HQ, CC, and RC, respectively. Thus, the high sensitivity, adequate reproducibility, good stability, and easy preparation of the Pd/Poly(BCG)/GCE surface made it a promising candidate for the determination of dihydroxybenzene isomers.
- Open Access
- 31 December 2023
- Published by Bulent Evcevit University in Karaelmas İş Sağlığı ve Güvenliği Dergisi
- Vol. 7 (3) , 163-174
Güvenlik Kültürü: Son On Yıldaki (2013-2023) Yayınların Bibliyometrik Analizi
Literatürde gelişmiş bir güvenlik kültürü, çalışanların işyerlerinde sağlıklı ve güvenli şartlarda çalışabilmeleri için işveren, çalışan ve yöneticilerin tehlike ve riskleri önceden algılama, önlem alma ve kontrol etmeye yönelik tutum ve davranışlara sahip olmaları olarak tanımlanır . İşyerinin güvenlik kültürü çalışanların güvenlik algısının göstergesidir. Bu konu ile ilgili yapılan çalışmaların artması güvenlik kültürünün geliştirilmesine hizmet edecektir. Bu düşünce ile son on yılda konu ile ilgili yapılan çalışmalar bibliyometrik yöntem ile VOSviewer aracılığıyla analiz edilmiştir. Bibliyometrik analiz, araştırmaların eğilimini analiz etmek, ortaya çıkan bilim alanlarını belirlemek, makalelerin hangi dergilerde ve ne sıklıkla yayınlandığını belirlemek için kullanılmaktadır. Hazırlanan çalışmada, Web of Science™(WoS) veri tabanında 2013 ve 2023 yılları arasında yayımlanan 4041 çalışma incelenerek, güvenlik kültürü konusunda bir bibliyometrik analiz oluşturulması amaçlanmıştır. Araştırmada, 123 farklı ülkeden 13432 yazara ait 1397 farklı dergideki bilimsel çalışmalar değerlendirilmiştir. Güvenlik kültürü çalışmalarının temel olarak (1) organizasyonel (örgütsel) güvenlik kültürü ve (2) hasta güvenliği kültürü şeklinde iki büyük kümeye ayrıldığı, multidisipliner ve çok yönlü bir kavram olduğu sayılarla ortaya konulmuştur.
- 31 December 2023
- Published by Bulent Evcevit University in Karaelmas İş Sağlığı ve Güvenliği Dergisi
- Vol. 7 (3) , 163-174
Open AccessGüvenlik Kültürü: Son On Yıldaki (2013-2023) Yayınların Bibliyometrik Analizi
Literatürde gelişmiş bir güvenlik kültürü, çalışanların işyerlerinde sağlıklı ve güvenli şartlarda çalışabilmeleri için işveren, çalışan ve yöneticilerin tehlike ve riskleri önceden algılama, önlem alma ve kontrol etmeye yönelik tutum ve davranışlara sahip olmaları olarak tanımlanır . İşyerinin güvenlik kültürü çalışanların güvenlik algısının göstergesidir. Bu konu ile ilgili yapılan çalışmaların artması güvenlik kültürünün geliştirilmesine hizmet edecektir. Bu düşünce ile son on yılda konu ile ilgili yapılan çalışmalar bibliyometrik yöntem ile VOSviewer aracılığıyla analiz edilmiştir. Bibliyometrik analiz, araştırmaların eğilimini analiz etmek, ortaya çıkan bilim alanlarını belirlemek, makalelerin hangi dergilerde ve ne sıklıkla yayınlandığını belirlemek için kullanılmaktadır. Hazırlanan çalışmada, Web of Science™(WoS) veri tabanında 2013 ve 2023 yılları arasında yayımlanan 4041 çalışma incelenerek, güvenlik kültürü konusunda bir bibliyometrik analiz oluşturulması amaçlanmıştır. Araştırmada, 123 farklı ülkeden 13432 yazara ait 1397 farklı dergideki bilimsel çalışmalar değerlendirilmiştir. Güvenlik kültürü çalışmalarının temel olarak (1) organizasyonel (örgütsel) güvenlik kültürü ve (2) hasta güvenliği kültürü şeklinde iki büyük kümeye ayrıldığı, multidisipliner ve çok yönlü bir kavram olduğu sayılarla ortaya konulmuştur.
- 9 December 2023
- Published by Springer Nature in Chemical Papers
- Vol. 78 (3) , 1863-1874
Prussian blue modified magnetite decorated MW-CNT nanocomposite: synthesis, characterization and potential use as Photo-Fenton catalysts for phenol degradation
- 9 December 2023
- Published by Springer Nature in Chemical Papers
- Vol. 78 (3) , 1863-1874
Prussian blue modified magnetite decorated MW-CNT nanocomposite: synthesis, characterization and potential use as Photo-Fenton catalysts for phenol degradation
- Open Access
- 26 June 2023
- Published by Springer Nature in Research Square
Prussian Blue Modified Magnetite Decorated MW-CNT Nanocomposite: Synthesis, Characterization and Potential Use as Photo-Fenton Catalysts for Phenol Degradation
Removal of organic pollutants with green and efficient methods is an important goal for researchers studying environmental pollution. Photo-Fenton systems with heterogeneous catalysts are a promising alternative for efficient water treatment. In this study, Prussian blue modified magnetite decorated multi-walled carbon nanotubes (MW-CNT) nanocomposite was prepared and for the first time applied to the photo-Fenton degradation of phenol. The catalyst was prepared by rapid hydrothermal method. XPS, SEM-EDX, XRD, FTIR methods were used for characterizing the functionalities and morphology of the catalyst. The effect of initial H2O2 concentration, catalyst mass, and initial pH of the phenol solution was investigated. Experimental results showed that 100 mg dm-3 of phenol could be degraded completely in 15 minutes at pH 7. This study describes the synthesis of the new Photo-Fenton catalyst for highly effective phenol treatment.
- 26 June 2023
- Published by Springer Nature in Research Square
Open AccessPrussian Blue Modified Magnetite Decorated MW-CNT Nanocomposite: Synthesis, Characterization and Potential Use as Photo-Fenton Catalysts for Phenol Degradation
Removal of organic pollutants with green and efficient methods is an important goal for researchers studying environmental pollution. Photo-Fenton systems with heterogeneous catalysts are a promising alternative for efficient water treatment. In this study, Prussian blue modified magnetite decorated multi-walled carbon nanotubes (MW-CNT) nanocomposite was prepared and for the first time applied to the photo-Fenton degradation of phenol. The catalyst was prepared by rapid hydrothermal method. XPS, SEM-EDX, XRD, FTIR methods were used for characterizing the functionalities and morphology of the catalyst. The effect of initial H2O2 concentration, catalyst mass, and initial pH of the phenol solution was investigated. Experimental results showed that 100 mg dm-3 of phenol could be degraded completely in 15 minutes at pH 7. This study describes the synthesis of the new Photo-Fenton catalyst for highly effective phenol treatment.
- Open Access
- 11 February 2020
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF CHEMISTRY
- Vol. 44 (1) , 125-141
Highly improved electrocatalytic oxidation of dimethylamine borane on silver nanoparticles modified polymer composite electrode
Dimethylamine borane (DMAB) is a promising fuel alternative for fuel cell applications. In this work cyclic voltammetric behavior of DMAB was investigated on the polymerized aminophenol film decorated with Ag nanoparticles in alkaline media. The polymer film was formed on the glassy carbon electrode by electrochemical technique and then, the surface was modified with Ag nanoparticles. The surface of the modified electrode was identified by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy techniques. The developed electrode has displayed high electrocatalytic activity for DMAB oxidation in alkaline media depending on the supporting electrolyte concentration. Experimental parameters such as cycle number used in electropolymerization of p-aminophenol, deposition of Ag nanoparticles and supporting electrolyte were optimized.
- 11 February 2020
- Published by The Scientific and Technological Research Council of Turkey (TUBITAK-ULAKBIM) - DIGITAL COMMONS JOURNALS in TURKISH JOURNAL OF CHEMISTRY
- Vol. 44 (1) , 125-141
Open AccessHighly improved electrocatalytic oxidation of dimethylamine borane on silver nanoparticles modified polymer composite electrode
Dimethylamine borane (DMAB) is a promising fuel alternative for fuel cell applications. In this work cyclic voltammetric behavior of DMAB was investigated on the polymerized aminophenol film decorated with Ag nanoparticles in alkaline media. The polymer film was formed on the glassy carbon electrode by electrochemical technique and then, the surface was modified with Ag nanoparticles. The surface of the modified electrode was identified by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy techniques. The developed electrode has displayed high electrocatalytic activity for DMAB oxidation in alkaline media depending on the supporting electrolyte concentration. Experimental parameters such as cycle number used in electropolymerization of p-aminophenol, deposition of Ag nanoparticles and supporting electrolyte were optimized.
- 26 September 2019
- Published by Wiley in Electroanalysis
- Vol. 32 (2) , 358-366
Enhanced Electrochemical Determination of Catechol and Hydroquinone Based on Pd Nanoparticles/Poly(Taurine) Modified Glassy Carbon Electrode
Here, Pd nanoparticles and poly(taurine) film was prepared on the glassy carbon electrode surface (Pd/Poly(TAU)/GCE) by the rapid electrochemical technique. The proposed composite surface was characterized by scanning electron microscopy(SEM), X‐ray photoelectron spectroscopy(XPS) and electrochemical impedance spectroscopy(EIS). Enhanced electron transfer ability and higher electroactive surface area were achieved at Pd/Poly(TAU)/GCE as compared to the bare GCE and polymer film electrode. The new and highly stable Pd/Poly(TAU)/GCE was employed for the individual and simultaneous determination of hydroquinone and catechol which were environmentally toxic. Under the optimized conditions, HQ and CC were individually determined by using the differantial pulse voltammetry in the linear ranges of 0.008–100 μM and 0.001–100 μM with the detection limits of (LOD) 2.1 nM and 0.68 nM, respectively. In case of simultaneous determination, LODs were found as 10 nM and 0.88 nM for HQ and CC, respectively. The content of both analytes in the real sample analysis was evaluated in the river water and tap water successfully.
- 26 September 2019
- Published by Wiley in Electroanalysis
- Vol. 32 (2) , 358-366
Enhanced Electrochemical Determination of Catechol and Hydroquinone Based on Pd Nanoparticles/Poly(Taurine) Modified Glassy Carbon Electrode
Here, Pd nanoparticles and poly(taurine) film was prepared on the glassy carbon electrode surface (Pd/Poly(TAU)/GCE) by the rapid electrochemical technique. The proposed composite surface was characterized by scanning electron microscopy(SEM), X‐ray photoelectron spectroscopy(XPS) and electrochemical impedance spectroscopy(EIS). Enhanced electron transfer ability and higher electroactive surface area were achieved at Pd/Poly(TAU)/GCE as compared to the bare GCE and polymer film electrode. The new and highly stable Pd/Poly(TAU)/GCE was employed for the individual and simultaneous determination of hydroquinone and catechol which were environmentally toxic. Under the optimized conditions, HQ and CC were individually determined by using the differantial pulse voltammetry in the linear ranges of 0.008–100 μM and 0.001–100 μM with the detection limits of (LOD) 2.1 nM and 0.68 nM, respectively. In case of simultaneous determination, LODs were found as 10 nM and 0.88 nM for HQ and CC, respectively. The content of both analytes in the real sample analysis was evaluated in the river water and tap water successfully.