David V. Plant
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
David V. Plant has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Andrew G. Kirk
Department of Electrical and Computer Engineering, McGill University, Montreal, QC, Canada
5 shared publications - Michael H. Ayliffe
McGill Univ. (Canada)
3 shared publications D. Kabal
Nortel Networks (Canada)
2 shared publicationsEric Bernier
McGill Univ. (Canada)
2 shared publicationsFrank A. P. Tooley
McGill Univ. (Canada)
2 shared publicationsFrederic K. Lacroix
McGill Univ. (Canada)
2 shared publications
Latest Publications
- 8 August 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 17 (8) , 577-579
Multichannel Filters Using Chirped Bandgap Structures in Microstrip Technology
We demonstrate two techniques for creating several narrowband transmission channels within the ultra-wide stopband of a chirped electromagnetic bandgap structure in microstrip technology. In contrast to previous demonstrations which inserted defects into single-frequency-tuned bandgap structures using ground-plane etching, we demonstrate the use of local pi phase-shifts (defects) and "Moire"-type superposition in a sinusoidal chirped bandgap structure having a network topology. We demonstrate the design of 4-to-6-channel filters with lower insertion losses (<5 dB) and broader stopbands than previous approaches in microstrip.
- 8 August 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 17 (8) , 577-579
Multichannel Filters Using Chirped Bandgap Structures in Microstrip Technology
We demonstrate two techniques for creating several narrowband transmission channels within the ultra-wide stopband of a chirped electromagnetic bandgap structure in microstrip technology. In contrast to previous demonstrations which inserted defects into single-frequency-tuned bandgap structures using ground-plane etching, we demonstrate the use of local pi phase-shifts (defects) and "Moire"-type superposition in a sinusoidal chirped bandgap structure having a network topology. We demonstrate the design of 4-to-6-channel filters with lower insertion losses (<5 dB) and broader stopbands than previous approaches in microstrip.
- 3 April 2006
- Published by Optica Publishing Group in Optics Express
- Vol. 14 (7) , 2573-2582
High reflectivity air-bridge subwavelength grating reflector and Fabry-Perot cavity in AlGaAs/GaAs
We present a novel air-bridge subwavelength grating reflector with very high reflectivity to be used as a top mirror in a VCSEL structure. We explain the design method, model the structure using both RCWA and FDTD, and predict the characteristics of a Fabry-Perot structure built with this reflector. We describe the fabrication of the suspended grating.
- 3 April 2006
- Published by Optica Publishing Group in Optics Express
- Vol. 14 (7) , 2573-2582
High reflectivity air-bridge subwavelength grating reflector and Fabry-Perot cavity in AlGaAs/GaAs
We present a novel air-bridge subwavelength grating reflector with very high reflectivity to be used as a top mirror in a VCSEL structure. We explain the design method, model the structure using both RCWA and FDTD, and predict the characteristics of a Fabry-Perot structure built with this reflector. We describe the fabrication of the suspended grating.
- 15 March 2005
- Published by Elsevier in Optics Communications
- Vol. 247 (4-6) , 257-264
New insights into the problem of shadowlike projection of a plane object illuminated by a spherical wavefront
- 15 March 2005
- Published by Elsevier in Optics Communications
- Vol. 247 (4-6) , 257-264
New insights into the problem of shadowlike projection of a plane object illuminated by a spherical wavefront
- 1 May 2004
- Published by Optica Publishing Group in Applied Optics
- Vol. 43 (13) , 2730-2733
018-μm complementary metal-oxide semiconductor push-pull vertical-cavity surface-emitting laser driver operating at 25 Gb/s with symmetric rising and falling edges
A vertical-cavity surface-emitting laser (VCSEL) driver design that utilizes a novel push-pull circuit topology is described. The VCSEL driver design can provide both a current pushing and a current pulling mechanism and therefore is capable of producing symmetric rise and fall times. The design was implemented in a 0.18-microm foundry n-well complementary metal-oxide semiconductor technology and operates at data rates up to 2.5 Gb/s with a power consumption of 45 mW at an average optical output power of 1 mW.
- 1 May 2004
- Published by Optica Publishing Group in Applied Optics
- Vol. 43 (13) , 2730-2733
018-μm complementary metal-oxide semiconductor push-pull vertical-cavity surface-emitting laser driver operating at 25 Gb/s with symmetric rising and falling edges
A vertical-cavity surface-emitting laser (VCSEL) driver design that utilizes a novel push-pull circuit topology is described. The VCSEL driver design can provide both a current pushing and a current pulling mechanism and therefore is capable of producing symmetric rise and fall times. The design was implemented in a 0.18-microm foundry n-well complementary metal-oxide semiconductor technology and operates at data rates up to 2.5 Gb/s with a power consumption of 45 mW at an average optical output power of 1 mW.
- 13 December 2001
- Published by SPIE-Intl Soc Optical Eng
- Vol. 4455, 198-209
Recent developments in parallel optical interconnects
Free-space parallel optical interconnects represent a possible solution to the off-chip communication bottleneck. We review developments in this field and compare the performance of some recently demonstrated systems with the projected future requirements of high speed digital systems. We also discuss progress in the area of design methodologies, tolerance analysis and packaging techniques. Manufacturing issues are considered and a comparison is made with other optical interconnect technologies.
- 13 December 2001
- Published by SPIE-Intl Soc Optical Eng
- Vol. 4455, 198-209
Recent developments in parallel optical interconnects
Free-space parallel optical interconnects represent a possible solution to the off-chip communication bottleneck. We review developments in this field and compare the performance of some recently demonstrated systems with the projected future requirements of high speed digital systems. We also discuss progress in the area of design methodologies, tolerance analysis and packaging techniques. Manufacturing issues are considered and a comparison is made with other optical interconnect technologies.
- 24 May 2000
- Published by SPIE-Intl Soc Optical Eng
- Vol. 4089, 508-520
Packaging of an optoelectronic-VLSI chip supporting a 32 X 32 array of surface-active devices
Innovative approaches to the packaging of a high-performance module accommodating a 32 X 32 array of surface-active devices indium bump bonded to a 9 X 9 mm2 VLSI chip are described. The module integrates a mini-lens array, a copper heat spreader, a thermoelectric cooler and an aluminum heatsink. The mini-lens array is aligned and packaged with the chip using a novel six degrees of freedom alignment technique. The module is compact (44 X 44 X 45 mm3), easy to assemble and can be passively removed and inserted into a free-space optical system with no need for further adjustments. The chip is mounted directly on a flexible printed-circuit board using a chip-on-board approach, providing 207 bond pad connections to the chip. The junction-to-TEC thermal resistance is only 0.4 degree(s)C/W.
- 24 May 2000
- Published by SPIE-Intl Soc Optical Eng
- Vol. 4089, 508-520
Packaging of an optoelectronic-VLSI chip supporting a 32 X 32 array of surface-active devices
Innovative approaches to the packaging of a high-performance module accommodating a 32 X 32 array of surface-active devices indium bump bonded to a 9 X 9 mm2 VLSI chip are described. The module integrates a mini-lens array, a copper heat spreader, a thermoelectric cooler and an aluminum heatsink. The mini-lens array is aligned and packaged with the chip using a novel six degrees of freedom alignment technique. The module is compact (44 X 44 X 45 mm3), easy to assemble and can be passively removed and inserted into a free-space optical system with no need for further adjustments. The chip is mounted directly on a flexible printed-circuit board using a chip-on-board approach, providing 207 bond pad connections to the chip. The junction-to-TEC thermal resistance is only 0.4 degree(s)C/W.
- 22 May 1998
- Published by SPIE-Intl Soc Optical Eng
- Vol. 3490, 502-506
Optomechanical, electrical, and thermal packaging of large 2D optoelectronic device arrays for free-space optical interconnects
There is no online version at this time. The PDF is only available to people who have bought the paper or have a subscription.
- 22 May 1998
- Published by SPIE-Intl Soc Optical Eng
- Vol. 3490, 502-506
Optomechanical, electrical, and thermal packaging of large 2D optoelectronic device arrays for free-space optical interconnects
There is no online version at this time. The PDF is only available to people who have bought the paper or have a subscription.
- 22 May 1998
- Published by SPIE-Intl Soc Optical Eng
- Vol. 3490, 48-52
Design and implementation of a two-stage optical-power-supply spot array generator for a modulator-based free-space interconnect
Free-space optical interconnects represent a candidate technology to alleviate some of the interconnection bottlenecks currently experienced by high performance electronic systems at the board to board and backplane level [1,2,3]. The two most widely investigated technologies for free-space optical data transmission are multiple quantum modulators (MQW) and arrays of vertical cavity surface emitting lasers (VCSELs). Although VCSELs have many desirable optical attributes, large arrays of VCSELs which can be hybridly attached to CMOS integrated circuits are not yet available. This has motivated the design of modulator-based systems. Recently a ring-based free-space optical interconnect [4] has been designed for optical backplane applications [1]. In this system optical data transmission is achieved by the use of GaAs multiple quantum modulators (MQW) which are used to modulate an externally generated spot array. Here we describe design and assembly of an optical array generator which is used as provide the spot array for this system. This is referred to as the optical power supply (UPS) module. The ring-based system is designed to be scaleable (to 4 or more boards), modular (to allow easy assembly and maintenance), compact and also robust and misalignment tolerant. The UPS for each stage of the system is designed as a separate module that is pre-aligned and then mounted onto the system with minimal additional adjustments. A kinematic mounting technique has been developed to enable the UPS to be demounted and remounted without further realignment.
- 22 May 1998
- Published by SPIE-Intl Soc Optical Eng
- Vol. 3490, 48-52
Design and implementation of a two-stage optical-power-supply spot array generator for a modulator-based free-space interconnect
Free-space optical interconnects represent a candidate technology to alleviate some of the interconnection bottlenecks currently experienced by high performance electronic systems at the board to board and backplane level [1,2,3]. The two most widely investigated technologies for free-space optical data transmission are multiple quantum modulators (MQW) and arrays of vertical cavity surface emitting lasers (VCSELs). Although VCSELs have many desirable optical attributes, large arrays of VCSELs which can be hybridly attached to CMOS integrated circuits are not yet available. This has motivated the design of modulator-based systems. Recently a ring-based free-space optical interconnect [4] has been designed for optical backplane applications [1]. In this system optical data transmission is achieved by the use of GaAs multiple quantum modulators (MQW) which are used to modulate an externally generated spot array. Here we describe design and assembly of an optical array generator which is used as provide the spot array for this system. This is referred to as the optical power supply (UPS) module. The ring-based system is designed to be scaleable (to 4 or more boards), modular (to allow easy assembly and maintenance), compact and also robust and misalignment tolerant. The UPS for each stage of the system is designed as a separate module that is pre-aligned and then mounted onto the system with minimal additional adjustments. A kinematic mounting technique has been developed to enable the UPS to be demounted and remounted without further realignment.