Clayton Cozzan
Research Subjects
Research Interests
Clayton Cozzan has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Ram Seshadri
University of California Santa Barbara
4 shared publications - Jacob L. Jones
North Carolina State University
3 shared publications Sungwook Mhin
Heat Treatment Technology R&BD Group Korea Institute of Industrial Technology (KITECH) 406‐840 Incheon Republic of Korea
3 shared publications- Alexander Mikhailovsky
University of California Santa Barbara
2 shared publications - Geoff Lee Brennecka
Department of Metallurgical and Materials Engineering, Colorado School of Mines 1 , Golden, Colorado 80401
2 shared publications Krishna Nittala
Korea Institute of Industrial Technology Gaetbeol‐ro 156 Yeonsu‐gu Incheon 406‐840 Korea
2 shared publications
Latest Publications
- 21 September 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 5 (38) , 10039-10046
Understanding the links between composition, polyhedral distortion, and luminescence properties in green-emitting β-Si 6−z Al z O z N 8−z :Eu 2+ phosphors
Inorganic phosphor materials play a crucial role in the creation of white light from blue and near-UV solid-state light-emitting diodes. Understanding the intricacies of the phosphor structure is key for setting the stage for improved, more efficient functionality. Average structure and coordination environment analysis of the robust and efficient green-emitting phosphor, β-SiAlON:Eu2+ (β-Si6−zAlzOzN8−zEu0.009), is combined here with a range of property measurements to elucidate the role of Al content (z) in luminescence properties, including the red shift of emission and the thermal quenching of luminescence as a function of increasing Al content z. Average structure techniques reveal changes in polyhedral distortion with increasing z for the 9-coordinate Eu site in β-SiAlON:Eu2+. X-ray absorption near edge structure (XANES) is used to confirm that the majority of the activator Eu is in the Eu2+ state, exhibiting the symmetry-allowed and efficient 4f75d0 → 4f65d1 transitions. Room temperature and temperature-dependent luminescence indicate a curious increase in thermal stability with increasing z over a small range due to an increasing barrier for thermal ionization, which is correlated to an increase in the quantum yield of the phosphor.
- 21 September 2017
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 5 (38) , 10039-10046
Understanding the links between composition, polyhedral distortion, and luminescence properties in green-emitting β-Si 6−z Al z O z N 8−z :Eu 2+ phosphors
Inorganic phosphor materials play a crucial role in the creation of white light from blue and near-UV solid-state light-emitting diodes. Understanding the intricacies of the phosphor structure is key for setting the stage for improved, more efficient functionality. Average structure and coordination environment analysis of the robust and efficient green-emitting phosphor, β-SiAlON:Eu2+ (β-Si6−zAlzOzN8−zEu0.009), is combined here with a range of property measurements to elucidate the role of Al content (z) in luminescence properties, including the red shift of emission and the thermal quenching of luminescence as a function of increasing Al content z. Average structure techniques reveal changes in polyhedral distortion with increasing z for the 9-coordinate Eu site in β-SiAlON:Eu2+. X-ray absorption near edge structure (XANES) is used to confirm that the majority of the activator Eu is in the Eu2+ state, exhibiting the symmetry-allowed and efficient 4f75d0 → 4f65d1 transitions. Room temperature and temperature-dependent luminescence indicate a curious increase in thermal stability with increasing z over a small range due to an increasing barrier for thermal ionization, which is correlated to an increase in the quantum yield of the phosphor.
- Open Access
- 6 February 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (4) , 2153-2158
Structural Evolution and Atom Clustering in β-SiAlON: β-Si6–zAlzOzN8–z
SiAlON ceramics, solid solutions based on the Si3N4 structure, are important, lightweight structural materials with intrinsically high strength, high hardness, and high thermal and chemical stability. Described by the chemical formula β-Si6–zAlzOzN8–z, from a compositional viewpoint, these materials can be regarded as solid solutions between Si3N4 and Al3O3N. A key aspect of the structural evolution with increasing Al and O (z in the formula) is to understand how these elements are distributed on the β-Si3N4 framework. The average and local structural evolution of highly phase-pure samples of β-Si6–zAlzOzN8–z with z = 0.050, 0.075, and 0.125 are studied here, using a combination of X-ray diffraction, NMR studies, and density functional theory calculations. Synchrotron X-ray diffraction establishes sample purity and indicates subtle changes in the average structure with increasing Al content in these compounds. Solid-state magic-angle-spinning 27Al NMR experiments, coupled with detailed ab initio calculations of NMR spectra of Al in different AlOqN4–q tetrahedra (0 ≤ q ≤ 4), reveal a tendency of Al and O to cluster in these materials. Independently, the calculations suggest an energetic preference for Al–O bond formation, instead of a random distribution, in the β-SiAlON system.
- 6 February 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (4) , 2153-2158
Open AccessStructural Evolution and Atom Clustering in β-SiAlON: β-Si6–zAlzOzN8–z
SiAlON ceramics, solid solutions based on the Si3N4 structure, are important, lightweight structural materials with intrinsically high strength, high hardness, and high thermal and chemical stability. Described by the chemical formula β-Si6–zAlzOzN8–z, from a compositional viewpoint, these materials can be regarded as solid solutions between Si3N4 and Al3O3N. A key aspect of the structural evolution with increasing Al and O (z in the formula) is to understand how these elements are distributed on the β-Si3N4 framework. The average and local structural evolution of highly phase-pure samples of β-Si6–zAlzOzN8–z with z = 0.050, 0.075, and 0.125 are studied here, using a combination of X-ray diffraction, NMR studies, and density functional theory calculations. Synchrotron X-ray diffraction establishes sample purity and indicates subtle changes in the average structure with increasing Al content in these compounds. Solid-state magic-angle-spinning 27Al NMR experiments, coupled with detailed ab initio calculations of NMR spectra of Al in different AlOqN4–q tetrahedra (0 ≤ q ≤ 4), reveal a tendency of Al and O to cluster in these materials. Independently, the calculations suggest an energetic preference for Al–O bond formation, instead of a random distribution, in the β-SiAlON system.
- Open Access
- 1 October 2016
- Published by AIP Publishing in AIP Advances
- Vol. 6 (10) , 105005
Monolithic translucent BaMgAl10O17:Eu2+ phosphors for laser-driven solid state lighting
With high power light emitting diodes and laser diodes being explored for white light generation and visible light communication, thermally robust encapsulation schemes for color-converting inorganic phosphors are essential. In the current work, the canonical blue-emitting phosphor, high purity Eu-doped BaMgAl10O17, has been prepared using microwave-assisted heating (25 min) and densified into translucent ceramic phosphor monoliths using spark plasma sintering (30 min). The resulting translucent ceramic monoliths convert UV laser light to blue light with the same efficiency as the starting powder and provide superior thermal management in comparison with silicone encapsulation.
- 1 October 2016
- Published by AIP Publishing in AIP Advances
- Vol. 6 (10) , 105005
Open AccessMonolithic translucent BaMgAl10O17:Eu2+ phosphors for laser-driven solid state lighting
With high power light emitting diodes and laser diodes being explored for white light generation and visible light communication, thermally robust encapsulation schemes for color-converting inorganic phosphors are essential. In the current work, the canonical blue-emitting phosphor, high purity Eu-doped BaMgAl10O17, has been prepared using microwave-assisted heating (25 min) and densified into translucent ceramic phosphor monoliths using spark plasma sintering (30 min). The resulting translucent ceramic monoliths convert UV laser light to blue light with the same efficiency as the starting powder and provide superior thermal management in comparison with silicone encapsulation.
- 22 January 2016
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 32 (4) , 1166-1170
Size Control of Porous Silicon-Based Nanoparticles via Pore-Wall Thinning
Photoluminescent silicon nanocrystals are very attractive for biomedical and electronic applications. Here a new process is presented to synthesize photoluminescent silicon nanocrystals with diameters smaller than 6 nm from a porous silicon template. These nanoparticles are formed using a pore-wall thinning approach, where the as-etched porous silicon layer is partially oxidized to silica, which is dissolved by a hydrofluoric acid solution, decreasing the pore-wall thickness. This decrease in pore-wall thickness leads to a corresponding decrease in the size of the nanocrystals that make up the pore walls, resulting in the formation of smaller nanoparticles during sonication of the porous silicon. Particle diameters were measured using dynamic light scattering, and these values were compared with the nanocrystallite size within the pore wall as determined from X-ray diffraction. Additionally, an increase in the quantum confinement effect is observed for these particles through an increase in the photoluminescence intensity of the nanoparticles compared with the as-etched nanoparticles, without the need for a further activation step by oxidation after synthesis.
- 22 January 2016
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 32 (4) , 1166-1170
Size Control of Porous Silicon-Based Nanoparticles via Pore-Wall Thinning
Photoluminescent silicon nanocrystals are very attractive for biomedical and electronic applications. Here a new process is presented to synthesize photoluminescent silicon nanocrystals with diameters smaller than 6 nm from a porous silicon template. These nanoparticles are formed using a pore-wall thinning approach, where the as-etched porous silicon layer is partially oxidized to silica, which is dissolved by a hydrofluoric acid solution, decreasing the pore-wall thickness. This decrease in pore-wall thickness leads to a corresponding decrease in the size of the nanocrystals that make up the pore walls, resulting in the formation of smaller nanoparticles during sonication of the porous silicon. Particle diameters were measured using dynamic light scattering, and these values were compared with the nanocrystallite size within the pore wall as determined from X-ray diffraction. Additionally, an increase in the quantum confinement effect is observed for these particles through an increase in the photoluminescence intensity of the nanoparticles compared with the as-etched nanoparticles, without the need for a further activation step by oxidation after synthesis.
- 1 October 2015
- Published by Elsevier in Solid State Sciences
- Vol. 48, 82-89
A single-phase full-color phosphor based on Ba 3 MgSi 2 O 8 co-activated with Eu 2+ , Tb 3+ , and Mn 2+
- 1 October 2015
- Published by Elsevier in Solid State Sciences
- Vol. 48, 82-89
A single-phase full-color phosphor based on Ba 3 MgSi 2 O 8 co-activated with Eu 2+ , Tb 3+ , and Mn 2+
- 1 June 2015
- Published by Wiley in Advanced Materials Interfaces
- Vol. 2 (10) , 1500181
Combined Experimental and Computational Methods Reveal the Evolution of Buried Interfaces during Synthesis of Ferroelectric Thin Films
Understanding interfaces between dissimilar materials is crucial to the development of modern technologies, for example, semiconductor–dielectric and thermoelectric–semiconductor interfaces in emerging electronic devices. However, the structural characterization of buried interfaces is challenging because many measurement techniques are surface sensitive by design. When interested in interface evolution during synthesis, the experimental challenges multiply and often necessitate in situ techniques. For solution‐derived lead zirconate titanate (PZT) ferroelectric thin films, the evolution of buried interfaces during synthesis (including dielectric–metal and metal–metal) is thought to dramatically influence the resultant dielectric and ferroelectric properties. In the present work, multiple experimental and computational methods are combined to characterize interface evolution during synthesis of ferroelectric PZT films on platinized Si wafers—including in situ X‐ray diffraction during thermal treatment, aberration‐corrected scanning transmission electron microscopy of samples quenched from various synthesis states, and calculations using density functional theory. Substantial interactions at buried interfaces in the PZT/Pt/Ti/SiO x /Si heterostructure are observed and discussed relative to their role(s) in the synthesis process. The results prove that perovskite PZT nucleates directly from the platinum (111)‐oriented bottom electrode and reveal the roles of Pb and O diffusion and intermetallic Pt3Pb and Pt3Ti phases.
- 1 June 2015
- Published by Wiley in Advanced Materials Interfaces
- Vol. 2 (10) , 1500181
Combined Experimental and Computational Methods Reveal the Evolution of Buried Interfaces during Synthesis of Ferroelectric Thin Films
Understanding interfaces between dissimilar materials is crucial to the development of modern technologies, for example, semiconductor–dielectric and thermoelectric–semiconductor interfaces in emerging electronic devices. However, the structural characterization of buried interfaces is challenging because many measurement techniques are surface sensitive by design. When interested in interface evolution during synthesis, the experimental challenges multiply and often necessitate in situ techniques. For solution‐derived lead zirconate titanate (PZT) ferroelectric thin films, the evolution of buried interfaces during synthesis (including dielectric–metal and metal–metal) is thought to dramatically influence the resultant dielectric and ferroelectric properties. In the present work, multiple experimental and computational methods are combined to characterize interface evolution during synthesis of ferroelectric PZT films on platinized Si wafers—including in situ X‐ray diffraction during thermal treatment, aberration‐corrected scanning transmission electron microscopy of samples quenched from various synthesis states, and calculations using density functional theory. Substantial interactions at buried interfaces in the PZT/Pt/Ti/SiO x /Si heterostructure are observed and discussed relative to their role(s) in the synthesis process. The results prove that perovskite PZT nucleates directly from the platinum (111)‐oriented bottom electrode and reveal the roles of Pb and O diffusion and intermetallic Pt3Pb and Pt3Ti phases.
- 6 February 2015
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 98 (5) , 1407-1412
Role of the PbTiO 3 Seed Layer on the Crystallization Behavior of PZT Thin Films
- 6 February 2015
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 98 (5) , 1407-1412
Role of the PbTiO 3 Seed Layer on the Crystallization Behavior of PZT Thin Films
- 10 June 2014
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 115 (22) , 224104
Two-step polarization reversal in biased ferroelectrics
Polarization reversal in polycrystalline ferroelectrics is shown to occur via two distinct and sequential domain reorientation steps. This reorientation sequence, which cannot be readily discriminated in the overall sample polarization, is made apparent using time-resolved high-energy x-ray diffraction. Upon application of electric fields opposite to the initial poling direction, two unique and significantly different time constants are observed. The first (faster time constant) is shown to be derived by the release of a residual stress due to initial electrical biasing and the second (slower time constant) due to the redevelopment of residual stress during further domain wall motion. A modified domain reorientation model is given that accurately describes the domain volume fraction evolution during the reversal process.
- 10 June 2014
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 115 (22) , 224104
Two-step polarization reversal in biased ferroelectrics
Polarization reversal in polycrystalline ferroelectrics is shown to occur via two distinct and sequential domain reorientation steps. This reorientation sequence, which cannot be readily discriminated in the overall sample polarization, is made apparent using time-resolved high-energy x-ray diffraction. Upon application of electric fields opposite to the initial poling direction, two unique and significantly different time constants are observed. The first (faster time constant) is shown to be derived by the release of a residual stress due to initial electrical biasing and the second (slower time constant) due to the redevelopment of residual stress during further domain wall motion. A modified domain reorientation model is given that accurately describes the domain volume fraction evolution during the reversal process.
- 13 August 2013
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 96 (9) , 2706-2709
Effect of Switching Atmospheric Conditions during Crystallization on the Phase Evolution of Solution‐Derived Lead Zirconate Titanate Thin Films
The crystallization behavior of solution‐derived lead zirconate titanate ( PZT ) thin films in different atmospheric environments was studied using in situ X‐ray diffraction. The stability of the transient intermetallic Pt 3 Pb phase and perovskite PZT is dependent on oxygen partial pressure during crystallization. Based on the relationship between oxygen partial pressure and the resultant phase stability of intermediate phases, a new route to produce PZT thin films was developed. The new route involves switching atmospheres during crystallization and is shown to mitigate the formation of the transient intermetallic Pt 3 Pb phase and to promote the perovskite PZT phase. The route evidences a new and significant variable controlling film synthesis and film microstructure.
- 13 August 2013
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 96 (9) , 2706-2709
Effect of Switching Atmospheric Conditions during Crystallization on the Phase Evolution of Solution‐Derived Lead Zirconate Titanate Thin Films
The crystallization behavior of solution‐derived lead zirconate titanate ( PZT ) thin films in different atmospheric environments was studied using in situ X‐ray diffraction. The stability of the transient intermetallic Pt 3 Pb phase and perovskite PZT is dependent on oxygen partial pressure during crystallization. Based on the relationship between oxygen partial pressure and the resultant phase stability of intermediate phases, a new route to produce PZT thin films was developed. The new route involves switching atmospheres during crystallization and is shown to mitigate the formation of the transient intermetallic Pt 3 Pb phase and to promote the perovskite PZT phase. The route evidences a new and significant variable controlling film synthesis and film microstructure.