Xinke Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Xinke Wang has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Igor Veremchuk
Max-Planck-Institut für Chemische Physik Fester Stoffe, Dresden 01187, Germany
5 shared publicationsChen Sun
Department of Electrical and Computer Engineering, National University of Singapore, Lower Kent Ridge Rd, Singapore
4 shared publications- Xiao Gong
National University of Singapore
4 shared publications - Kaizhen Han
Department of Electrical and Computer Engineering, National University of Singapore, Queenstown, Singapore
3 shared publications Matej Bobnar
Max-Planck-Institut für Chemische Physik Fester Stoffe, Dresden 01187, Germany
3 shared publicationsUlrich Burkhardt
Max-Planck-Institut für Chemische Physik Fester Stoffe, Dresden 01187, Germany
3 shared publications
Latest Publications
- 14 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (9) , 5262-5269
Highly Scaled InGaZnO Ferroelectric Field-Effect Transistors and Ternary Content-Addressable Memory
We demonstrate nonvolatile and area-efficient ternary content-addressable memories (TCAMs) featuring amorphous indium–gallium–zinc–oxide (a-IGZO) ferroelectric field-effect transistors (FeFETs) with excellent electrical characteristics. An extremely large sensing margin of the TCAM array is achieved due to the large current ON/OFF ratio ( $I_{ \mathrm{\scriptscriptstyle ON}}/I_{ \mathrm{\scriptscriptstyle OFF}})$ of the a-IGZO FeFETs. Our Hf x Zr $_{\text {1-x}}\text{O}$ 2 (HZO)-based a-IGZO FeFETs have a metal–ferroelectric–metal–insulator–semiconductor (MFMIS) structure. By engineering the area ratio of the ferroelectric layer ( ${A}_{Fe}$ ) and the metal–oxide–semiconductor layer ( ${A}_{MOS}$ ), a large memory window (MW) of 2.9 V is realized. Reliability test results, including retention, endurance, and positive bias temperature instability, show long-term retention of more than ten years and high endurance of 10 8 cycles. In addition, by scaling the channel length down to 40 nm, ON current of $77 ~\mu \text{A}/ \mu \text{m}$ ( ${V}_{\mathrm{GS}} - {V}_{\mathrm{TH}}$ = 5 V and ${V}_{\mathrm{DS}}$ = 2 V) and ${I}_{ \mathrm{\scriptscriptstyle ON}} / {I}_{ \mathrm{\scriptscriptstyle OFF}}$ of more than eight orders can be obtained for the ultrascaled a-IGZO FeFETs while maintaining an MW of 2.8 V.
- 14 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (9) , 5262-5269
Highly Scaled InGaZnO Ferroelectric Field-Effect Transistors and Ternary Content-Addressable Memory
We demonstrate nonvolatile and area-efficient ternary content-addressable memories (TCAMs) featuring amorphous indium–gallium–zinc–oxide (a-IGZO) ferroelectric field-effect transistors (FeFETs) with excellent electrical characteristics. An extremely large sensing margin of the TCAM array is achieved due to the large current ON/OFF ratio ( $I_{ \mathrm{\scriptscriptstyle ON}}/I_{ \mathrm{\scriptscriptstyle OFF}})$ of the a-IGZO FeFETs. Our Hf x Zr $_{\text {1-x}}\text{O}$ 2 (HZO)-based a-IGZO FeFETs have a metal–ferroelectric–metal–insulator–semiconductor (MFMIS) structure. By engineering the area ratio of the ferroelectric layer ( ${A}_{Fe}$ ) and the metal–oxide–semiconductor layer ( ${A}_{MOS}$ ), a large memory window (MW) of 2.9 V is realized. Reliability test results, including retention, endurance, and positive bias temperature instability, show long-term retention of more than ten years and high endurance of 10 8 cycles. In addition, by scaling the channel length down to 40 nm, ON current of $77 ~\mu \text{A}/ \mu \text{m}$ ( ${V}_{\mathrm{GS}} - {V}_{\mathrm{TH}}$ = 5 V and ${V}_{\mathrm{DS}}$ = 2 V) and ${I}_{ \mathrm{\scriptscriptstyle ON}} / {I}_{ \mathrm{\scriptscriptstyle OFF}}$ of more than eight orders can be obtained for the ultrascaled a-IGZO FeFETs while maintaining an MW of 2.8 V.
- 25 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (4) , 1425-1431
Strained Silicon-on-Insulator Platform for Cointegration of Logic and RF—Part I: Implant-Induced Strain Relaxation
The relaxation of tensile strain in fully depleted (FD) strained silicon-on-insulator (SSOI) by means of ion implantation is experimentally demonstrated in this work. This could enable SiGe p-channel field-effect transistors (pFETs) with high compressive strain (after ion implantation and Ge condensation) to be formed together with Si n-channel field-effect transistors (nFETs) with high tensile strain on the same substrate. From simulations in advanced technology node, 0.8% strain of nFETs and -0.9% strain of pFETs in fin structures can provide saturation drain current and peak G m enhancements of ~20%-30%. f T and f max benefit greatly from strain across the entire range of V G , with their peak values increasing significantly, thus allowing SSOI devices to meet 5G targets. In addition, forward back-bias shifts f T and f max curves toward lower | V G |, enabling reduced power consumption at the same high performance and providing better linearity. Hence, the ability to form highly strained nFETs and pFETs together on a common FD-SSOI substrate paves the way for it to become the ultimate high-performance complementary metal-oxide-semiconductor (CMOS) platform for 5G RF and logic circuits. The relaxation of the tensile strain is demonstrated and documented in Part I. A novel Comb-like device architecture to further enhance the SSOI electrical and RF performance is provided in Part II.
- 25 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (4) , 1425-1431
Strained Silicon-on-Insulator Platform for Cointegration of Logic and RF—Part I: Implant-Induced Strain Relaxation
The relaxation of tensile strain in fully depleted (FD) strained silicon-on-insulator (SSOI) by means of ion implantation is experimentally demonstrated in this work. This could enable SiGe p-channel field-effect transistors (pFETs) with high compressive strain (after ion implantation and Ge condensation) to be formed together with Si n-channel field-effect transistors (nFETs) with high tensile strain on the same substrate. From simulations in advanced technology node, 0.8% strain of nFETs and -0.9% strain of pFETs in fin structures can provide saturation drain current and peak G m enhancements of ~20%-30%. f T and f max benefit greatly from strain across the entire range of V G , with their peak values increasing significantly, thus allowing SSOI devices to meet 5G targets. In addition, forward back-bias shifts f T and f max curves toward lower | V G |, enabling reduced power consumption at the same high performance and providing better linearity. Hence, the ability to form highly strained nFETs and pFETs together on a common FD-SSOI substrate paves the way for it to become the ultimate high-performance complementary metal-oxide-semiconductor (CMOS) platform for 5G RF and logic circuits. The relaxation of the tensile strain is demonstrated and documented in Part I. A novel Comb-like device architecture to further enhance the SSOI electrical and RF performance is provided in Part II.
- 3 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (12) , 5633-5638
Temperature Dependence of Ferroelectricity in Al-Doped HfO2 Featuring a High P r of 23.7 μC/cm2
We experimentally investigated the dependence of ferroelectricity in Al-doped HfO₂ (HAO) films on the annealing temperatures ranging from 600 °C to 800 °C. Increasing the annealing temperature from 600 °C to 700 °C yields an enhanced remnant polarization (Pr), but a slight reduction in coercive field (EC). While the highest reported Pr of 23.7 μC/cm² for the HAO films can be obtained with an annealing temperature of 800 °C, an obvious degradation in the uniformity of both Pr and EC is observed. In addition, as the annealing temperature increases, the HAO films suffer from the raised leakage current and the degraded endurance characteristics.
- 3 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (12) , 5633-5638
Temperature Dependence of Ferroelectricity in Al-Doped HfO2 Featuring a High P r of 23.7 μC/cm2
We experimentally investigated the dependence of ferroelectricity in Al-doped HfO₂ (HAO) films on the annealing temperatures ranging from 600 °C to 800 °C. Increasing the annealing temperature from 600 °C to 700 °C yields an enhanced remnant polarization (Pr), but a slight reduction in coercive field (EC). While the highest reported Pr of 23.7 μC/cm² for the HAO films can be obtained with an annealing temperature of 800 °C, an obvious degradation in the uniformity of both Pr and EC is observed. In addition, as the annealing temperature increases, the HAO films suffer from the raised leakage current and the degraded endurance characteristics.
- 2 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 41 (12) , 1837-1840
A Metal-Insulator-Semiconductor Non-Volatile Programmable Capacitor Based on a HfAlOₓ Ferroelectric Film
In this letter, we proposed and experimentally demonstrated a metal-insulator-semiconductor (MIS) ferroelectric capacitor with non-volatile programmable capacitance. By switching the polarization of the Al-doped HfO2 ferroelectric insulator with the external electric field, the depletion width of the semiconductor can be modulated, leading to the continuously adjustable capacitance of the device. Due to the non-volatility of ferroelectricity, the programmed capacitance is stable without the constant DC bias. We also proposed some potential applications of the capacitor in the data storage and circuit design.
- 2 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 41 (12) , 1837-1840
A Metal-Insulator-Semiconductor Non-Volatile Programmable Capacitor Based on a HfAlOₓ Ferroelectric Film
In this letter, we proposed and experimentally demonstrated a metal-insulator-semiconductor (MIS) ferroelectric capacitor with non-volatile programmable capacitance. By switching the polarization of the Al-doped HfO2 ferroelectric insulator with the external electric field, the depletion width of the semiconductor can be modulated, leading to the continuously adjustable capacitance of the device. Due to the non-volatility of ferroelectricity, the programmed capacitance is stable without the constant DC bias. We also proposed some potential applications of the capacitor in the data storage and circuit design.
- Open Access
- 6 August 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (35) , 9482-9493
Thermoelectric stability of Eu- and Na-substituted PbTe
The out-of-equilibrium samples show highest values of figure-of-merit, ZTmax, up to 2.1.
- 6 August 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (35) , 9482-9493
Open AccessThermoelectric stability of Eu- and Na-substituted PbTe
The out-of-equilibrium samples show highest values of figure-of-merit, ZTmax, up to 2.1.
- 15 February 2018
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 30 (4) , 1362-1372
Sodium Substitution in Lead Telluride
- 15 February 2018
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 30 (4) , 1362-1372
Sodium Substitution in Lead Telluride
- 20 October 2016
- Published by Wiley in ChemInform
- Vol. 47 (45)
ChemInform Abstract: Solid Solution Pb1‐xEuxTe: Constitution and Thermoelectric Behavior.
Polycrystalline Pb1‐xEuxTe samples (x = 0—0.5) are prepared by melting stoichiometric amounts of the elements (graphite‐coated evacuated silica tubes, 1273 K, 6 h) followed by spark plasma sintering of the pelletized product (673 K, 60 MPa, 7 min).
- 20 October 2016
- Published by Wiley in ChemInform
- Vol. 47 (45)
ChemInform Abstract: Solid Solution Pb1‐xEuxTe: Constitution and Thermoelectric Behavior.
Polycrystalline Pb1‐xEuxTe samples (x = 0—0.5) are prepared by melting stoichiometric amounts of the elements (graphite‐coated evacuated silica tubes, 1273 K, 6 h) followed by spark plasma sintering of the pelletized product (673 K, 60 MPa, 7 min).
- 19 July 2016
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 3 (9) , 1152-1159
Solid solution Pb 1−x Eu x Te: constitution and thermoelectric behavior
The thermoelectric properties of polycrystalline materials on the basis of the solid solution Pb 1−x Eu x Te prepared by spark-plasma-sintering are characterized. The solid solution undergoes a metal–semiconductor transition in parallel to the p–n transition around 500 K.
- 19 July 2016
- Published by Royal Society of Chemistry (RSC) in Inorganic Chemistry Frontiers
- Vol. 3 (9) , 1152-1159
Solid solution Pb 1−x Eu x Te: constitution and thermoelectric behavior
The thermoelectric properties of polycrystalline materials on the basis of the solid solution Pb 1−x Eu x Te prepared by spark-plasma-sintering are characterized. The solid solution undergoes a metal–semiconductor transition in parallel to the p–n transition around 500 K.
- 1 November 2015
- Published by Elsevier in Journal of Rare Earths
- Vol. 33 (11) , 1175-1181
Thermoelectric properties of Eu- and Na-substituted SnTe
- 1 November 2015
- Published by Elsevier in Journal of Rare Earths
- Vol. 33 (11) , 1175-1181
Thermoelectric properties of Eu- and Na-substituted SnTe