SFSara Freund

Sara Freund

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sara Freund has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Shape sensing of optical fiber Bragg gratings based on deep learning

    by Samaneh Manavi Roodsari, Antal Huck-Horvath, Sara Freund, Azhar Zam, Georg Rauter, Wolfgang Schade, Philippe C Cattin

    Continuum robots in robot-assisted minimally invasive surgeries provide adequate access to target anatomies that are not directly reachable through small incisions. Achieving precise and reliable shape estimation of such snake-like manipulators necessitates an accurate navigation system, that requires no line-of-sight and is immune to electromagnetic noise. Fiber Bragg grating (FBG) shape sensing, particularly eccentric FBG (eFBG), is a promising and cost-effective solution for this task. However, in eFBG sensors, the spectral intensity of the Bragg wavelengths that carries the strain information can be affected by undesired bending-induced phenomena, making standard characterization techniques less suitable for these sensors. We showed in our previous work that a deep learning model has the potential to extract the strain information from the eFBG sensor’s spectrum and accurately predict its shape. In this paper, we conducted a more thorough investigation to find a suitable architectural design of the deep learning model to further increase shape prediction accuracy. We used the Hyperband algorithm to search for optimal hyperparameters in two steps. First, we limited the search space to layer settings of the network, from which, the best-performing configuration was selected. Then, we modified the search space for tuning the training and loss calculation hyperparameters. We also analyzed various data transformations on the network’s input and output variables, as data rescaling can directly influence the model’s performance. Additionally, we performed discriminative training using the Siamese network architecture that employs two convolutional neural networks (CNN) with identical parameters to learn similarity metrics between the spectra of similar target values. The best-performing network architecture among all evaluated configurations can predict the shape of a 30 cm long sensor with a median tip error of 3.11 mm in a curvature range of 1.4 m−1 to 35.3 m−1.


  • Open Access

    Fabrication and Characterization of a Flexible FBG-Based Shape Sensor Using Single-Mode Fibers

    by Samaneh Manavi Roodsari, Sara Freund, Azhar Zam, Georg Rauter, Philippe C. Cattin

    Minimally invasive surgical procedures have become the preferable option, as the recovery period and the risk of infections are significantly lower than traditional surgeries. However, the main challenge in using flexible tools for minimal surgical interventions is the lack of precise feedback on their shape and tip position inside the patient's body. Shape sensors based on fiber Bragg gratings (FBGs) can provide accurate shape information depending on their design. One of the most common configurations in FBG-based shape sensors is to attach three single-mode optical fibers with arrays of FBGs in a triangular fashion around a substrate. Usually, the selected substrates dominate the bending stiffness of the sensor probe, as they have a larger diameter and show less flexibility compared to the optical fibers. Although sensors with this configuration can accurately estimate the shape, they cannot be implemented in flexible endoscopes where large deflections are expected. This paper investigates the shape sensor's performance when using a superelastic substrate with a small diameter instead of a substrate with dominating bending stiffness. A generalized model is also designed for characterizing this type of flexible FBG-based shape sensor. Moreover, we evaluated the sensor in single and multi-bend deformations using two shape reconstruction methods.


  • Open Access

    Giant thermal expansion of a two-dimensional supramolecular network triggered by alkyl chain motion

    by Sebastian Scherb, Antoine Hinaut, Rémy Pawlak, J. G. Vilhena, Yi Liu, Sara Freund, Zhao Liu, Xinliang Feng, Klaus Müllen, Thilo Glatzel, et al.

    Thermal expansion, the response in shape, area or volume of a solid with heat, is usually large in molecular materials compared to their inorganic counterparts. Resulting from the intrinsic molecule flexibility, conformational changes or variable intermolecular interactions, the exact interplay between these mechanisms is however poorly understood down to the molecular level. Here, we investigate the structural variations of a two-dimensional supramolecular network on Au(111) consisting of shape persistent polyphenylene molecules equipped with peripheral dodecyl chains. By comparing high-resolution scanning probe microscopy and molecular dynamics simulations obtained at 5 and 300 K, we determine the thermal expansion coefficient of the assembly of 980 ± 110 × 10−6 K−1, twice larger than other molecular systems hitherto reported in the literature, and two orders of magnitude larger than conventional materials. This giant positive expansion originates from the increased mobility of the dodecyl chains with temperature that determine the intermolecular interactions and the network spacing.


  • Open Access

    Comparing a porphyrin- and a coumarin-based dye adsorbed on NiO(001)

    by Sara Freund, Antoine Hinaut, Nathalie Marinakis, Edwin C. Constable, Ernst Meyer, Catherine E Housecroft, Thilo Glatzel

    Properties of metal oxides, such as optical absorption, can be influenced through the sensitization with molecular species that absorb visible light. Molecular/solid interfaces of this kind are particularly suited for the development and design of emerging hybrid technologies such as dye-sensitized solar cells. A key optimization parameter for such devices is the choice of the compounds in order to control the direction and the intensity of charge transfer across the interface. Here, the deposition of two different molecular dyes, porphyrin and coumarin, as single-layered islands on a NiO(001) single crystal surface have been studied by means of non-contact atomic force microscopy at room temperature. Comparison of both island types reveals different adsorption and packing of each dye, as well as an opposite charge-transfer direction, which has been quantified by Kelvin probe force microscopy measurements.


  • Open Access

    Anchoring of a dye precursor on NiO(001) studied by non-contact atomic force microscopy

    by Sara Freund, Antoine Hinaut, Nathalie Marinakis, Edwin C. Constable, Ernst Meyer, Catherine E Housecroft, Thilo Glatzel

    The properties of metal oxides, such as charge-transport mechanisms or optoelectronic characteristics, can be modified by functionalization with organic molecules. This kind of organic/inorganic surface is nowadays highly regarded, in particular, for the design of hybrid devices such as dye-sensitized solar cells. However, a key parameter for optimized interfaces is not only the choice of the compounds but also the properties of adsorption. Here, we investigated the deposition of an organic dye precursor molecule on a NiO(001) single crystal surface by means of non-contact atomic force microscopy at room temperature. Depending on the coverage, single molecules, groups of adsorbates with random or recognizable shapes, or islands of closely packed molecules were identified. Single molecules and self assemblies are resolved with submolecular resolution showing that they are lying flat on the surface in a trans-conformation. Within the limits of our Kelvin probe microscopy setup a charge transfer from NiO to the molecular layer of 0.3 electrons per molecules was observed only in the areas where the molecules are closed packed.