Jie Dai
Research Subjects
Research Interests
Jie Dai has a total of 187 co-authors. Here are the top co-authors by number of shared publications:
- Qin-Yu Zhu
College of Chemistry, Chemical Engineering and Materials Science
80 shared publications Yong Zhang
Department of Chemistry and Key Laboratory of Organic Synthesis of Jiangsu Province, Soochow University, Suzhou 215123, P.R. China
19 shared publicationsGuo-Qing Bian
College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, People’s Republic of China
18 shared publicationsJin-Le Hou
Shandong Provincial Key Laboratory of Chemical Energy Storage and Novel Cell Technology, and School of Chemistry and Chemical Engineering, Liaocheng University, Liaocheng 252000, P.R. China
18 shared publicationsQin-Yu Zhu
College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, P. R. China
17 shared publicationsPeng Huo
Department of Aeronautics and Astronautics, Fudan University, Shanghai 200433, P. R. China
16 shared publications
Latest Publications
- 20 March 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (12) , 6023-6031
Robust Redox-Active Tetrathiafulvalene–Cobalt Metal–Organic Frameworks for Supercapatteries with Promoting Electrochemical Performances
Integrating abundant electroactive sites and redox reactions into stable metal-organic framework (MOF) electrodes is an effective and relatively unexplored approach to improve the performance of emerging supercapatteries. In this study, electroactive Co(II) was chosen to coordinate with a redox-active tetrathiafulvalene (TTF) ligand to construct a new MOF, formulated as [Co(TTF(py)4)(BDC)] (1) (TTF(py)4 is tetra(4-pyridyl)-TTF and H2BDC is terephthalic acid). Crystallographic characterization indicated that 1 possesses a three-dimensional 6-fold interpenetrating diamond-like topology with high crystal density. Isostructural [Zn(TTF(py)4)(BDC)] (2) was also synthesized to explore the effect of metal ions on the performance of supercapatteries. When directly used as an electrode material in a 3-electrode system, the iodine-treated MOFs 1 and 2 (namely 1-ox and 2-ox, respectively) electrodes exhibit battery-type performance and high capacities. The specific capacities are 1072.2 and 857.8 C g-1 at 1 A g-1 for 1-ox and 2-ox, respectively. The AC||1-ox supercapattery device presents a specific energy of 100.8 Wh kg-1 at a specific power of 0.975 kW kg-1. Ex situ characterizations and theoretical calculations revealed that the excellent performance of 1-ox originates from the synergistic effect of the robust topology, Co(II) metal centers, and ligand dominant mechanism.
- 20 March 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (12) , 6023-6031
Robust Redox-Active Tetrathiafulvalene–Cobalt Metal–Organic Frameworks for Supercapatteries with Promoting Electrochemical Performances
Integrating abundant electroactive sites and redox reactions into stable metal-organic framework (MOF) electrodes is an effective and relatively unexplored approach to improve the performance of emerging supercapatteries. In this study, electroactive Co(II) was chosen to coordinate with a redox-active tetrathiafulvalene (TTF) ligand to construct a new MOF, formulated as [Co(TTF(py)4)(BDC)] (1) (TTF(py)4 is tetra(4-pyridyl)-TTF and H2BDC is terephthalic acid). Crystallographic characterization indicated that 1 possesses a three-dimensional 6-fold interpenetrating diamond-like topology with high crystal density. Isostructural [Zn(TTF(py)4)(BDC)] (2) was also synthesized to explore the effect of metal ions on the performance of supercapatteries. When directly used as an electrode material in a 3-electrode system, the iodine-treated MOFs 1 and 2 (namely 1-ox and 2-ox, respectively) electrodes exhibit battery-type performance and high capacities. The specific capacities are 1072.2 and 857.8 C g-1 at 1 A g-1 for 1-ox and 2-ox, respectively. The AC||1-ox supercapattery device presents a specific energy of 100.8 Wh kg-1 at a specific power of 0.975 kW kg-1. Ex situ characterizations and theoretical calculations revealed that the excellent performance of 1-ox originates from the synergistic effect of the robust topology, Co(II) metal centers, and ligand dominant mechanism.
- 8 March 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (11) , 4672-4679
Redox-Active Two-Dimensional Tetrathiafulvalene-Copper Metal–Organic Framework with Boosted Electrochemical Performances for Supercapatteries
Metal-organic frameworks (MOFs) have attracted noticeable attention as promising candidates for electrochemical energy storage. However, the lack of electrical conductivity and the weak stability of most MOFs result in poor electrochemical performances. Here, a tetrathiafulvalene (TTF)-based complex, formulated as [(CuCN)2(TTF(py)4)] (1) (TTF-(py)4 = tetra(4-pyridyl)-TTF), is assembled by in situ generation of coordinated CN- from a nontoxic source. Single-crystal X-ray diffraction analysis reveals that compound 1 possesses a two-dimensional layered planar structure, which is further stacked in parallel to form a three-dimensional supramolecular framework. The planar coordination environment of 1 is the first example of a TTF-based MOF. Attributed to the unique structure and redox TTF ligand, the electrical conductivity of 1 is significantly increased by 5 orders of magnitude upon iodine treatment. The iodine-treated 1 (1-ox) electrode displays typical battery-type behavior through electrochemical characterizations. The supercapattery based on the 1-ox positrode and AC negatrode presents a high specific capacity of 266.5 C g-1 at a specific current of 1 A g-1 with a remarkable specific energy of 62.9 Wh kg-1 at a specific power of 1.1 kW kg-1. The excellent electrochemical performance of 1-ox is one of the best among those reported supercapatteries, demonstrating a new strategy for developing MOF-based electrode materials.
- 8 March 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (11) , 4672-4679
Redox-Active Two-Dimensional Tetrathiafulvalene-Copper Metal–Organic Framework with Boosted Electrochemical Performances for Supercapatteries
Metal-organic frameworks (MOFs) have attracted noticeable attention as promising candidates for electrochemical energy storage. However, the lack of electrical conductivity and the weak stability of most MOFs result in poor electrochemical performances. Here, a tetrathiafulvalene (TTF)-based complex, formulated as [(CuCN)2(TTF(py)4)] (1) (TTF-(py)4 = tetra(4-pyridyl)-TTF), is assembled by in situ generation of coordinated CN- from a nontoxic source. Single-crystal X-ray diffraction analysis reveals that compound 1 possesses a two-dimensional layered planar structure, which is further stacked in parallel to form a three-dimensional supramolecular framework. The planar coordination environment of 1 is the first example of a TTF-based MOF. Attributed to the unique structure and redox TTF ligand, the electrical conductivity of 1 is significantly increased by 5 orders of magnitude upon iodine treatment. The iodine-treated 1 (1-ox) electrode displays typical battery-type behavior through electrochemical characterizations. The supercapattery based on the 1-ox positrode and AC negatrode presents a high specific capacity of 266.5 C g-1 at a specific current of 1 A g-1 with a remarkable specific energy of 62.9 Wh kg-1 at a specific power of 1.1 kW kg-1. The excellent electrochemical performance of 1-ox is one of the best among those reported supercapatteries, demonstrating a new strategy for developing MOF-based electrode materials.
- 25 January 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (5) , 6621-6630
Oxidatively Doped Tetrathiafulvalene-Based Metal–Organic Frameworks for High Specific Energy of Supercapatteries
Poor electrical conductivity and instability of metal-organic frameworks (MOFs) have limited their energy storage and conversion efficiency. In this work, we report the application of oxidatively doped tetrathiafulvalene (TTF)-based MOFs for high-performance electrodes in supercapatteries. Two isostructural MOFs, formulated as [M(py-TTF-py)(BPDC)]·2H2O (M = NiII (1), ZnII (2); py-TTF-py = 2,6-bis(4'-pyridyl)TTF; H2BPDC = biphenyl-4,4'-dicarboxylic acid), are crystallographically characterized. The structural analyses show that the two MOFs possess a three-dimensional 8-fold interpenetrating diamond-like topology, which is the first example for TTF-based dual-ligand MOFs. Upon iodine treatment, MOFs 1 and 2 are converted into oxidatively doped 1-ox and 2-ox with high crystallinity. The electrical conductivity of 1-ox and 2-ox is significantly increased by six∼seven orders of magnitude. Benefiting from the unique structure and the pronounced development of electrical conductivity, the specific capacities reach 833.2 and 828.3 C g-1 at a specific current of 1 A g-1 for 1-ox and 2-ox, respectively. When used as a battery-type positrode to assemble a supercapattery, the AC∥1-ox and AC∥2-ox (AC = activated carbon) present an energy density of 90.3 and 83.0 Wh kg-1 at a power density of 1.18 kW kg-1 and great cycling stability with 82% of original capacity and 92% columbic efficiency retention after 10,000 cycles. Ex situ characterization illustrates the ligand-dominated mechanism in the charge/discharge processes. The excellent electrochemical performances of 1-ox and 2-ox are rarely reported for supercapatteries, illustrating that the construction of unique highly dense and robust structures of MOFs followed by postsynthetic oxidative doping is an effective approach to fabricate MOF-based electrode materials.
- 25 January 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (5) , 6621-6630
Oxidatively Doped Tetrathiafulvalene-Based Metal–Organic Frameworks for High Specific Energy of Supercapatteries
Poor electrical conductivity and instability of metal-organic frameworks (MOFs) have limited their energy storage and conversion efficiency. In this work, we report the application of oxidatively doped tetrathiafulvalene (TTF)-based MOFs for high-performance electrodes in supercapatteries. Two isostructural MOFs, formulated as [M(py-TTF-py)(BPDC)]·2H2O (M = NiII (1), ZnII (2); py-TTF-py = 2,6-bis(4'-pyridyl)TTF; H2BPDC = biphenyl-4,4'-dicarboxylic acid), are crystallographically characterized. The structural analyses show that the two MOFs possess a three-dimensional 8-fold interpenetrating diamond-like topology, which is the first example for TTF-based dual-ligand MOFs. Upon iodine treatment, MOFs 1 and 2 are converted into oxidatively doped 1-ox and 2-ox with high crystallinity. The electrical conductivity of 1-ox and 2-ox is significantly increased by six∼seven orders of magnitude. Benefiting from the unique structure and the pronounced development of electrical conductivity, the specific capacities reach 833.2 and 828.3 C g-1 at a specific current of 1 A g-1 for 1-ox and 2-ox, respectively. When used as a battery-type positrode to assemble a supercapattery, the AC∥1-ox and AC∥2-ox (AC = activated carbon) present an energy density of 90.3 and 83.0 Wh kg-1 at a power density of 1.18 kW kg-1 and great cycling stability with 82% of original capacity and 92% columbic efficiency retention after 10,000 cycles. Ex situ characterization illustrates the ligand-dominated mechanism in the charge/discharge processes. The excellent electrochemical performances of 1-ox and 2-ox are rarely reported for supercapatteries, illustrating that the construction of unique highly dense and robust structures of MOFs followed by postsynthetic oxidative doping is an effective approach to fabricate MOF-based electrode materials.
- 9 August 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (33) , 13191-13198
Photocurrent and Gelation Properties of Polyphenol-Modified Titanium-Oxo Compounds
Organic-inorganic hybrid metal-polyphenols as stable structural modules have gained extensive interest due to their diverse applications. However, titanium-oxo compounds (TOCs) with large molecular polyphenols have been less explored, and they were expected to be different from small polyphenols with isolated metal ions. Herein, 4-methyl-esculetin (Mesc), a catechol derivative, was selected to construct three TOCs, namely, [Ti17O24(Mesc)(4)((OPr)-Pr-i)(16)] (1), [Ti12O14((OPr)-Pr-i)(18)][Ti16O14(Mesc)(12)((OPr)-Pr-i)(14)] (2), and [Ti3O(Mesc)(2)(OAc)(2)((OPr)-Pr-i)(4)] (3). These compounds were structurally characterized. Photocurrent responses were evaluated using the compound-sensitized TiO2 electrodes. It was found that the current densities of 1-3 electrodes are in the order of 1 >> 3 > 2, which relates to the ligand-to-TiO core and ligand-to-ligand charge transfers (LMCT and LLCT, respectively). Density functional theory calculations showed that the lowest band gap of 1 originates from its LLCT. Compound 1 reacted with polyphenol tannin (TA) to form a fully transparent and robust gel (1-TA), and the gelation properties were investigated. Using the gel as a nano-TiO2 fixing agent, solar cell electrodes were prepared by a low-temperature wet method. The photocurrent responsive behavior of the 1-TA/TiO2 electrode was compared with that of the 1-sensitized traditional hightemperature-treated TiO2 electrode. Although the current density of the former is somewhat lower than that of the traditional electrode, the low-temperature wet preparation of the 1-TA/TiO2 electrode is more energy-efficient and sustainable.
- 9 August 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (33) , 13191-13198
Photocurrent and Gelation Properties of Polyphenol-Modified Titanium-Oxo Compounds
Organic-inorganic hybrid metal-polyphenols as stable structural modules have gained extensive interest due to their diverse applications. However, titanium-oxo compounds (TOCs) with large molecular polyphenols have been less explored, and they were expected to be different from small polyphenols with isolated metal ions. Herein, 4-methyl-esculetin (Mesc), a catechol derivative, was selected to construct three TOCs, namely, [Ti17O24(Mesc)(4)((OPr)-Pr-i)(16)] (1), [Ti12O14((OPr)-Pr-i)(18)][Ti16O14(Mesc)(12)((OPr)-Pr-i)(14)] (2), and [Ti3O(Mesc)(2)(OAc)(2)((OPr)-Pr-i)(4)] (3). These compounds were structurally characterized. Photocurrent responses were evaluated using the compound-sensitized TiO2 electrodes. It was found that the current densities of 1-3 electrodes are in the order of 1 >> 3 > 2, which relates to the ligand-to-TiO core and ligand-to-ligand charge transfers (LMCT and LLCT, respectively). Density functional theory calculations showed that the lowest band gap of 1 originates from its LLCT. Compound 1 reacted with polyphenol tannin (TA) to form a fully transparent and robust gel (1-TA), and the gelation properties were investigated. Using the gel as a nano-TiO2 fixing agent, solar cell electrodes were prepared by a low-temperature wet method. The photocurrent responsive behavior of the 1-TA/TiO2 electrode was compared with that of the 1-sensitized traditional hightemperature-treated TiO2 electrode. Although the current density of the former is somewhat lower than that of the traditional electrode, the low-temperature wet preparation of the 1-TA/TiO2 electrode is more energy-efficient and sustainable.
- 18 February 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (9) , 4024-4032
A Convenient Procedure for Preparing BiOX–TiO2 Photoelectrocatalytic Electrodes from a Titanium–Oxo Compound-Modified Carbon Fiber Cloth
Photoelectrocatalysis (PEC) has shown great advantages in sustainable organic synthesis and wastewater treatment because the PEC process can minimize electron–hole recombination, thereby improving the photocatalytic performance. Here, we report a convenient procedure for preparing immobilized BiOX–TiO2 photoelectrocatalytic electrodes from a titanium–oxo compound (TOC)-modified carbon fiber cloth (CFC). Crystalline TOCs composed of Ti12 cations and bismuth halide anions, [Ti12O14(OiPr)18][Bi3Br11(THF)2] (1) and [Ti12O14(OiPr)18][Bi4I14(THF)2] (2), were grown on CFC. Taking advantage of the easy hydrolysis of the titanium–oxo cation and bismuth halide anion, we could easily transform these CFC-immobilized crystals into BiOX–TiO2/CFC (X = Br or I) photocatalysts, which facilitates recycling of the catalysts. The photocatalytic dye degradation test showed that the efficiency did not decrease obviously after 10 photocatalytic cycles. Using BiOX–TiO2-modified CFC as electrodes, electrocatalysis (EC), photocatalysis (PC), and PEC were examined. PEC showed an attractive synergistic effect of EC and PC. These TOC-modified CFCs would be potential candidates for catalytic electrodes for sustainable wastewater purification.
- 18 February 2022
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (9) , 4024-4032
A Convenient Procedure for Preparing BiOX–TiO2 Photoelectrocatalytic Electrodes from a Titanium–Oxo Compound-Modified Carbon Fiber Cloth
Photoelectrocatalysis (PEC) has shown great advantages in sustainable organic synthesis and wastewater treatment because the PEC process can minimize electron–hole recombination, thereby improving the photocatalytic performance. Here, we report a convenient procedure for preparing immobilized BiOX–TiO2 photoelectrocatalytic electrodes from a titanium–oxo compound (TOC)-modified carbon fiber cloth (CFC). Crystalline TOCs composed of Ti12 cations and bismuth halide anions, [Ti12O14(OiPr)18][Bi3Br11(THF)2] (1) and [Ti12O14(OiPr)18][Bi4I14(THF)2] (2), were grown on CFC. Taking advantage of the easy hydrolysis of the titanium–oxo cation and bismuth halide anion, we could easily transform these CFC-immobilized crystals into BiOX–TiO2/CFC (X = Br or I) photocatalysts, which facilitates recycling of the catalysts. The photocatalytic dye degradation test showed that the efficiency did not decrease obviously after 10 photocatalytic cycles. Using BiOX–TiO2-modified CFC as electrodes, electrocatalysis (EC), photocatalysis (PC), and PEC were examined. PEC showed an attractive synergistic effect of EC and PC. These TOC-modified CFCs would be potential candidates for catalytic electrodes for sustainable wastewater purification.
- 20 December 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (1) , 486-495
A Cyclic Titanium-Oxo Cluster with a Tetrathiafulvalene Connector as a Precursor for Highly Efficient Adsorbent of Cationic Dyes
Titanium-oxo clusters (TOCs) have been studied for applications in catalysis, energy storage and transfer, light emission, and so on; however, use of TOCs for the selective adsorption of dyes has not yet been reported. Herein, a TOC compound formulated as [Ti6O3(OiPr)14(TTFTC)]4 (1, TTFTC = tetrathiafulvalene-tetracarboxylate) was successfully prepared and crystallographically characterized. Compound 1 has a cyclic structure assembled by four Ti6 clusters and four rodlike TTFTC connectors. Red compound 1 self-condenses to form a black polymeric organic–inorganic hybrid material (denoted as B-1), which was characterized by various techniques. B-1 is an amorphous TiO material that is formed by the irregular condensation of 1 by the removal of alkoxyl groups. B-1 exhibits high dye adsorption efficiency toward cationic dyes with a qe value of 651.3 mg/g at 298 K for methylene blue (MB). Moreover, B-1 can be used to selectively remove MB not only from mixed cationic–anionic dye solutions but also from some mixed cationic dyes, which is related to their structures. Kinetic, isotherm, and thermodynamic studies demonstrated that the pseudo-second-order kinetic model and Freundlich model show a good fit to the experimental data. The adsorption process involves an exothermic and entropy decreasing process. In addition, dye-adsorbed B-1 can be further used as a photocurrent-responsive material. The work opens up a new field for the application of TOCs in the selective adsorption and removal of dyes.
- 20 December 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 61 (1) , 486-495
A Cyclic Titanium-Oxo Cluster with a Tetrathiafulvalene Connector as a Precursor for Highly Efficient Adsorbent of Cationic Dyes
Titanium-oxo clusters (TOCs) have been studied for applications in catalysis, energy storage and transfer, light emission, and so on; however, use of TOCs for the selective adsorption of dyes has not yet been reported. Herein, a TOC compound formulated as [Ti6O3(OiPr)14(TTFTC)]4 (1, TTFTC = tetrathiafulvalene-tetracarboxylate) was successfully prepared and crystallographically characterized. Compound 1 has a cyclic structure assembled by four Ti6 clusters and four rodlike TTFTC connectors. Red compound 1 self-condenses to form a black polymeric organic–inorganic hybrid material (denoted as B-1), which was characterized by various techniques. B-1 is an amorphous TiO material that is formed by the irregular condensation of 1 by the removal of alkoxyl groups. B-1 exhibits high dye adsorption efficiency toward cationic dyes with a qe value of 651.3 mg/g at 298 K for methylene blue (MB). Moreover, B-1 can be used to selectively remove MB not only from mixed cationic–anionic dye solutions but also from some mixed cationic dyes, which is related to their structures. Kinetic, isotherm, and thermodynamic studies demonstrated that the pseudo-second-order kinetic model and Freundlich model show a good fit to the experimental data. The adsorption process involves an exothermic and entropy decreasing process. In addition, dye-adsorbed B-1 can be further used as a photocurrent-responsive material. The work opens up a new field for the application of TOCs in the selective adsorption and removal of dyes.
- 26 October 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (22) , 17074-17082
Tetrathiafulvalene–Cobalt Metal–Organic Frameworks for Lithium-Ion Batteries with Superb Rate Capability
Although pristine metal–organic framework (MOF) anodes for lithium-ion batteries (LIBs) show moderate activities and relatively stable cycling, the poor rate capability of the MOF anodes limited their applications in the development of a new generation of energy storage. Herein, the electric active CoII ion is selected to coordinate with redox-active S-rich tetrathiafulvalene (TTF) derivatives to create two TTF-Co-MOFs, formulated as [Co2(py-TTF-py)2(BDC)2]·2DMF·H2O (TTF-Co-MOF 1) and [Co2(py-TTF-py)2(BPDC)2]·3DMF·3H2O (TTF-Co-MOF 2), where py-TTF-py = 2,6-bis(4′-pyridyl)tetrathiafulvalene, H2BDC = terephthalic acid, H2BPDC = biphenyl-4,4′-dicarboxylic acid, and DMF = N,N-dimethylformamide. Crystallographic characterization indicated that the two MOFs possess similar 2-fold-interpenetrating 3D frameworks but with two different pore sizes. The pore-size-dependent performances of the TTF-Co-MOFs were explored to optimize the MOFs as the anode materials for LIBs. TTF-Co-MOF 1 presents a high reversible specific capacity of 1186.6 mAh g–1 at 200 mA g–1 after 287 cycles. The rate capability is greatly enhanced by the introduction of CoII into TTF-based MOFs with specific capacities of 1028.6 mAh g–1 at 5 A g–1 and 966.5 mAh g–1 at 10 A g–1. On the basis of the series analysis of theoretical calculations, electrochemical impedance spectroscopy, and crystal structures, it is found that the CoII metal centers play a bridging role in charge transport within the MOF framework, which is beneficial for the transportation of Li ions. The competitive performances of TTF-Co-MOF 1 are attributed to the synergistic effect of the CoII metal centers and S-rich TTF ligand as well as suitable porosity. The study shed some light for the fabrication of advanced energy storage devices through the rational design of MOF-based anode materials.
- 26 October 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (22) , 17074-17082
Tetrathiafulvalene–Cobalt Metal–Organic Frameworks for Lithium-Ion Batteries with Superb Rate Capability
Although pristine metal–organic framework (MOF) anodes for lithium-ion batteries (LIBs) show moderate activities and relatively stable cycling, the poor rate capability of the MOF anodes limited their applications in the development of a new generation of energy storage. Herein, the electric active CoII ion is selected to coordinate with redox-active S-rich tetrathiafulvalene (TTF) derivatives to create two TTF-Co-MOFs, formulated as [Co2(py-TTF-py)2(BDC)2]·2DMF·H2O (TTF-Co-MOF 1) and [Co2(py-TTF-py)2(BPDC)2]·3DMF·3H2O (TTF-Co-MOF 2), where py-TTF-py = 2,6-bis(4′-pyridyl)tetrathiafulvalene, H2BDC = terephthalic acid, H2BPDC = biphenyl-4,4′-dicarboxylic acid, and DMF = N,N-dimethylformamide. Crystallographic characterization indicated that the two MOFs possess similar 2-fold-interpenetrating 3D frameworks but with two different pore sizes. The pore-size-dependent performances of the TTF-Co-MOFs were explored to optimize the MOFs as the anode materials for LIBs. TTF-Co-MOF 1 presents a high reversible specific capacity of 1186.6 mAh g–1 at 200 mA g–1 after 287 cycles. The rate capability is greatly enhanced by the introduction of CoII into TTF-based MOFs with specific capacities of 1028.6 mAh g–1 at 5 A g–1 and 966.5 mAh g–1 at 10 A g–1. On the basis of the series analysis of theoretical calculations, electrochemical impedance spectroscopy, and crystal structures, it is found that the CoII metal centers play a bridging role in charge transport within the MOF framework, which is beneficial for the transportation of Li ions. The competitive performances of TTF-Co-MOF 1 are attributed to the synergistic effect of the CoII metal centers and S-rich TTF ligand as well as suitable porosity. The study shed some light for the fabrication of advanced energy storage devices through the rational design of MOF-based anode materials.
- 5 August 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (16) , 12255-12262
Mono- and Bismetalphenanthroline-Substituted Ti12 Clusters: Structural Variance and the Effect on Electronic State and Photocurrent Property
Despite the numerous titanium-oxo clusters (TOCs) which have been reported, the nature of small clusters (nuclearity < 10) as model compounds showed large deviation from that of nanoscale TiO materials. Therefore, theoretical and experimental studies for large TOCs merit more attention. We recently prepared and crystallographically characterized a series of large TOCs: Ti11O15(OiPr)16(Cophen) (1), Ti11O15(OiPr)16(Mnphen) (2), Ti10O14(OEt)16(Mnphen)2 (3), and Ti10O14(OEt)16(Mnphphen)2 (4) (phen = 1,10-phenanthroline, phphen = 4,7-biphenyl-phen). These compounds are derivatives of a Ti12 parent cluster by replacing one or two of the five-coordinated titanium atoms of the Ti12 cluster with a transition metal M, Co(II) and Mn(II), that is chelated by a phen group. The effects of mono- and bis-substituted Mphen on the charge and structure of the clusters are discussed. Theoretical evaluation of the frontier orbitals of the clusters is carried out on the basis of the precisely defined crystal structures. Different from the dye molecule to TiO core charge transfer for the dye-modified TOCs, charge transfer in these clusters is from TiO/TiOM to phen/Mphen. The effects of different metal ions and the number of substituted Mphen moieties on the photocurrent properties are evaluated. The results will be of interest to research on cluster chemistry, especially on the TOC chemistry.
- 5 August 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (16) , 12255-12262
Mono- and Bismetalphenanthroline-Substituted Ti12 Clusters: Structural Variance and the Effect on Electronic State and Photocurrent Property
Despite the numerous titanium-oxo clusters (TOCs) which have been reported, the nature of small clusters (nuclearity < 10) as model compounds showed large deviation from that of nanoscale TiO materials. Therefore, theoretical and experimental studies for large TOCs merit more attention. We recently prepared and crystallographically characterized a series of large TOCs: Ti11O15(OiPr)16(Cophen) (1), Ti11O15(OiPr)16(Mnphen) (2), Ti10O14(OEt)16(Mnphen)2 (3), and Ti10O14(OEt)16(Mnphphen)2 (4) (phen = 1,10-phenanthroline, phphen = 4,7-biphenyl-phen). These compounds are derivatives of a Ti12 parent cluster by replacing one or two of the five-coordinated titanium atoms of the Ti12 cluster with a transition metal M, Co(II) and Mn(II), that is chelated by a phen group. The effects of mono- and bis-substituted Mphen on the charge and structure of the clusters are discussed. Theoretical evaluation of the frontier orbitals of the clusters is carried out on the basis of the precisely defined crystal structures. Different from the dye molecule to TiO core charge transfer for the dye-modified TOCs, charge transfer in these clusters is from TiO/TiOM to phen/Mphen. The effects of different metal ions and the number of substituted Mphen moieties on the photocurrent properties are evaluated. The results will be of interest to research on cluster chemistry, especially on the TOC chemistry.
- 8 July 2021
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 50 (32) , 11091-11098
Copper-bipyridine grid frameworks incorporating redox-active tetrathiafulvalene: structures and supercapacitance
Redox active tetrathiafulvalene (TTF) and its derivatives when used as electrode additives have exhibited improved energy efficiency and sustainability in batteries. However, the structure–property relationship has not been investigated in detail until very recently. In this work, three redox-active TTF compounds were synthesized, and formulated as [Cu(HL)2(bpa)2]n (1), [Cu(bpe)2(H2O)2]n·2n(HL)·nMeOH·nH2O (2), and [Cu(bpp)2(H2O)2]n·2n(HL) (3) (L = dimethylthio-tetrathiafulvalene-bicarboxylate) for this work. The effects of conjugated state and spacer length of the linkers on structural assembly and band gap as well as the interactions of TTF–TTF/TTF-bpy are discussed. Compound 1 is a bpa and HL co-coordinated 1D Cu(II) polymer. Compounds 2 and 3 are 2D Cu(II)-bipyridine (4,4) MOFs incorporating HL (1−) as free anion columns. The photocurrent density of 2 is larger than those of 1 and 3 due to a strong charge transfer from TTF to bpe in compound 2. The supercapacitance performances of these compounds were evaluated by cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) techniques. The results revealed that the 2D MOF structures of 2 and 3 are beneficial for good specific capacitance values (Csp). This work revealed the structure–property relationships of TTF derivatives for use as electrode active materials in energy transfer and storage.
- 8 July 2021
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 50 (32) , 11091-11098
Copper-bipyridine grid frameworks incorporating redox-active tetrathiafulvalene: structures and supercapacitance
Redox active tetrathiafulvalene (TTF) and its derivatives when used as electrode additives have exhibited improved energy efficiency and sustainability in batteries. However, the structure–property relationship has not been investigated in detail until very recently. In this work, three redox-active TTF compounds were synthesized, and formulated as [Cu(HL)2(bpa)2]n (1), [Cu(bpe)2(H2O)2]n·2n(HL)·nMeOH·nH2O (2), and [Cu(bpp)2(H2O)2]n·2n(HL) (3) (L = dimethylthio-tetrathiafulvalene-bicarboxylate) for this work. The effects of conjugated state and spacer length of the linkers on structural assembly and band gap as well as the interactions of TTF–TTF/TTF-bpy are discussed. Compound 1 is a bpa and HL co-coordinated 1D Cu(II) polymer. Compounds 2 and 3 are 2D Cu(II)-bipyridine (4,4) MOFs incorporating HL (1−) as free anion columns. The photocurrent density of 2 is larger than those of 1 and 3 due to a strong charge transfer from TTF to bpe in compound 2. The supercapacitance performances of these compounds were evaluated by cyclic voltammetry (CV) and galvanostatic charge–discharge (GCD) techniques. The results revealed that the 2D MOF structures of 2 and 3 are beneficial for good specific capacitance values (Csp). This work revealed the structure–property relationships of TTF derivatives for use as electrode active materials in energy transfer and storage.
- 18 June 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (13) , 9589-9597
Assembly of a Titanium-Oxo Cluster and a Bismuth Iodide Cluster, a Single-Source Precursor of a p–n-Type Photocatalyst
Titanium oxides and bismuth halides or oxyhalides have been known to be excellent semiconductors with both excellent photocatalytic and photoelectric properties. The design of supersalts assembled by titanium-oxo clusters (TOCs) and bismuth iodide clusters is a hopeful strategy for exploring the chemistry and application of new titanium-oxo clusters. We report herein a series of unusual ionic TOCs with Ti12 oxo cluster cations and bismuth iodide anions, [Ti12O15(OiPr)17]3[Bi3I12] (Bi3), [Ti12O14(OiPr)18][Bi4I14(THF)2] (Bi4), and [Ti12O14(OiPr)18][Ti11BiO14(OiPr)17][Bi6I22] (Bi6). Single-crystal X-ray analysis revealed that the type and charge of the Ti12 clusters varied with the charges of different bismuth iodide clusters. Taking advantage of the easy hydrolysis of the TOCs and BiI clusters in water, we used these supersalt crystals as single-source precursors to prepare a p–n-type BiOI-TiO photocatalyst. The heterojunction materials were carefully characterized by powder X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, etc. The synergistic effect of the two components of BiOI and TiO on the photocatalytic degradation of RhB in water is demonstrated. This is a very convenient method for obtaining a p–n-type BiOI-TiO heterojuction photocatalyst by just placing the ground TOC crystals into water.
- 18 June 2021
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 60 (13) , 9589-9597
Assembly of a Titanium-Oxo Cluster and a Bismuth Iodide Cluster, a Single-Source Precursor of a p–n-Type Photocatalyst
Titanium oxides and bismuth halides or oxyhalides have been known to be excellent semiconductors with both excellent photocatalytic and photoelectric properties. The design of supersalts assembled by titanium-oxo clusters (TOCs) and bismuth iodide clusters is a hopeful strategy for exploring the chemistry and application of new titanium-oxo clusters. We report herein a series of unusual ionic TOCs with Ti12 oxo cluster cations and bismuth iodide anions, [Ti12O15(OiPr)17]3[Bi3I12] (Bi3), [Ti12O14(OiPr)18][Bi4I14(THF)2] (Bi4), and [Ti12O14(OiPr)18][Ti11BiO14(OiPr)17][Bi6I22] (Bi6). Single-crystal X-ray analysis revealed that the type and charge of the Ti12 clusters varied with the charges of different bismuth iodide clusters. Taking advantage of the easy hydrolysis of the TOCs and BiI clusters in water, we used these supersalt crystals as single-source precursors to prepare a p–n-type BiOI-TiO photocatalyst. The heterojunction materials were carefully characterized by powder X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, etc. The synergistic effect of the two components of BiOI and TiO on the photocatalytic degradation of RhB in water is demonstrated. This is a very convenient method for obtaining a p–n-type BiOI-TiO heterojuction photocatalyst by just placing the ground TOC crystals into water.