Stephen Francis Bush
Stephen Francis Bush has a total of 67 co-authors. Here are the top co-authors by number of shared publications:
- Sanjay Goel
University at Albany, SUNY
4 shared publications T.L. Johnson
GE Corporate R&D, Schenectady, NY, USA
4 shared publicationsA. Fijany
2 shared publicationsDmitri Botvich
Telecommunication Software and Systems Group
2 shared publicationsF. Fisher
2 shared publicationsFrank Walsh
Waterford Institute of Technology Carriganore Campus
2 shared publications
Latest Publications
- 1 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 42 (7) , 1861-1870
Design for High-Precision Time-Sensitive Networking: Synchronization for the Quantum Network Control Plane
Tight integration between classical and quantum networking requires strict synchronization of events between the classical and quantum portions of the network. Time-Sensitive Networking (TSN) as defined by IEEE 802.1Q is limited to accuracy on the order of microseconds due to limitations in time synchronization performance; TSN gate control is thus similarly limited. This work presents a new High-Precision TSN that enables greater accuracy and resolution toward sub-nanosecond TSN gate control and can directly support entanglement distribution, a key component in a software-designed quantum network architecture where classical control can reach deep into the quantum network and directly control time critical operations.
- 1 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 42 (7) , 1861-1870
Design for High-Precision Time-Sensitive Networking: Synchronization for the Quantum Network Control Plane
Tight integration between classical and quantum networking requires strict synchronization of events between the classical and quantum portions of the network. Time-Sensitive Networking (TSN) as defined by IEEE 802.1Q is limited to accuracy on the order of microseconds due to limitations in time synchronization performance; TSN gate control is thus similarly limited. This work presents a new High-Precision TSN that enables greater accuracy and resolution toward sub-nanosecond TSN gate control and can directly support entanglement distribution, a key component in a software-designed quantum network architecture where classical control can reach deep into the quantum network and directly control time critical operations.
- 31 August 2021
- Published by American Vacuum Society in AVS Quantum Science
- Vol. 3 (3) , 030501
A perspective on industrial quantum networks
The vision is a software-defined quantum network that enables a flexible experimental platform for developing quantum applications for industry. While components of the quantum Internet are under development, the control plane remains undefined. The quantum Internet, like the classical Internet, will be a network of networks. Operation of an industrial quantum network is viewed as a networked control problem, and a time-sensitive network control plane is proposed to enable a quantum software-defined network. Measurement-device-independent quantum key distribution is used as an example implementation since it provides a foundation for a quantum repeater and, by extension, the quantum Internet. Results indicate that a time-sensitive network control plane design is feasible, and its pros and cons are discussed.
- 31 August 2021
- Published by American Vacuum Society in AVS Quantum Science
- Vol. 3 (3) , 030501
A perspective on industrial quantum networks
The vision is a software-defined quantum network that enables a flexible experimental platform for developing quantum applications for industry. While components of the quantum Internet are under development, the control plane remains undefined. The quantum Internet, like the classical Internet, will be a network of networks. Operation of an industrial quantum network is viewed as a networked control problem, and a time-sensitive network control plane is proposed to enable a quantum software-defined network. Measurement-device-independent quantum key distribution is used as an example implementation since it provides a foundation for a quantum repeater and, by extension, the quantum Internet. Results indicate that a time-sensitive network control plane design is feasible, and its pros and cons are discussed.
- 15 August 2016
- Published by Morressier GmbH
DEPRESSION NEGATIVELY IMPACTS SURVIVAL IN UTERINE CARCINOSARCOMA
- 15 August 2016
- Published by Morressier GmbH
DEPRESSION NEGATIVELY IMPACTS SURVIVAL IN UTERINE CARCINOSARCOMA
- 6 August 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Molecular, Biological, and Multi-Scale Communications
- Vol. 1 (1) , 90-96
Defining Communication at the Bottom
Nanoscale communication is expected to offer unprecedented benefits. However, lack of a precise definition and general framework for nanoscale communication has resulted in limited impact and dissipated effort. The IEEE P1906.1/Draft 1.0 Recommended Practice for Nanoscale and Molecular Communication Framework provides the precise, common definition of nanoscale communication and a standard, general framework. The definition of nanoscale communication must carefully depict the field so that it captures the unique aspects of small-scale physics with respect to communication. Both the definition and framework must be broad enough to cover the scope of cross-disciplinary technologies that may be utilized while simultaneously be precise enough to allow for interoperable and reusable components.The implication for the field is significant. The IEEE P1906.1/ Draft 1.0 Recommended Practice for Nanoscale and Molecular Communication Framework will enable diverse disciplines to have a common language and reference for making lasting contributions. A lasting impact will be possible because others can now build upon these results through rational design and synthesis.
- 6 August 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Molecular, Biological, and Multi-Scale Communications
- Vol. 1 (1) , 90-96
Defining Communication at the Bottom
Nanoscale communication is expected to offer unprecedented benefits. However, lack of a precise definition and general framework for nanoscale communication has resulted in limited impact and dissipated effort. The IEEE P1906.1/Draft 1.0 Recommended Practice for Nanoscale and Molecular Communication Framework provides the precise, common definition of nanoscale communication and a standard, general framework. The definition of nanoscale communication must carefully depict the field so that it captures the unique aspects of small-scale physics with respect to communication. Both the definition and framework must be broad enough to cover the scope of cross-disciplinary technologies that may be utilized while simultaneously be precise enough to allow for interoperable and reusable components.The implication for the field is significant. The IEEE P1906.1/ Draft 1.0 Recommended Practice for Nanoscale and Molecular Communication Framework will enable diverse disciplines to have a common language and reference for making lasting contributions. A lasting impact will be possible because others can now build upon these results through rational design and synthesis.
- 1 December 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 31 (12) , 815-824
Persistence Length as a Metric for Modeling and Simulation of Nanoscale Communication Networks
This paper explores the significance of persistence length in modeling and simulation of nanoscale networks. Persistence length, used by chemists and biologists, pertains to a wide range of high-aspect ratio, small-scale materials, and has a significant impact on communication at the nanoscale. For example, it applies to carbon nanotubes, microtubules, DNA, and nanowires as well as many other potential nanoscale network structures. Consider the similarities between microtubules in living cells and carbon nanotubes (CNTs). Both microtubules and carbon nanotubes have similar geometric structures and share similar properties; both are capable of transporting information at the nanoscale. Microtubules and carbon nanotubes can also self-organize to create random graph structures, which can be used as communication networks. At the same time, networks of CNTs may be used for molecular-level transport in the human body supporting treatment of diseases. This paper examines fundamental properties of network topologies created by filamentous structures and their relationship to the performance of nanoscale communication networks. This behavior depends strongly on the alignment of bond segments and filaments, which in turn depends on the persistence length of the tubes. We use graph spectral analysis for analyzing a simulated generic network of filamentous structures. A network graph is extracted from the layout of such a structure and graph properties of the resultant graph are examined. The paper presents the results of the simulation with tubes of different persistence lengths and makes the case for including persistence length as a parameter in standards for nanoscale communications. Our simulation results show that at different persistence lengths the network structure and the resultant properties of the graph structure that impact nanoscale communications can be predicted and analyzed. Such standard parameters help in calibrating an analytical model to a physical network allowing for synchronization between analytical and experimental results.
- 1 December 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 31 (12) , 815-824
Persistence Length as a Metric for Modeling and Simulation of Nanoscale Communication Networks
This paper explores the significance of persistence length in modeling and simulation of nanoscale networks. Persistence length, used by chemists and biologists, pertains to a wide range of high-aspect ratio, small-scale materials, and has a significant impact on communication at the nanoscale. For example, it applies to carbon nanotubes, microtubules, DNA, and nanowires as well as many other potential nanoscale network structures. Consider the similarities between microtubules in living cells and carbon nanotubes (CNTs). Both microtubules and carbon nanotubes have similar geometric structures and share similar properties; both are capable of transporting information at the nanoscale. Microtubules and carbon nanotubes can also self-organize to create random graph structures, which can be used as communication networks. At the same time, networks of CNTs may be used for molecular-level transport in the human body supporting treatment of diseases. This paper examines fundamental properties of network topologies created by filamentous structures and their relationship to the performance of nanoscale communication networks. This behavior depends strongly on the alignment of bond segments and filaments, which in turn depends on the persistence length of the tubes. We use graph spectral analysis for analyzing a simulated generic network of filamentous structures. A network graph is extracted from the layout of such a structure and graph properties of the resultant graph are examined. The paper presents the results of the simulation with tubes of different persistence lengths and makes the case for including persistence length as a parameter in standards for nanoscale communications. Our simulation results show that at different persistence lengths the network structure and the resultant properties of the graph structure that impact nanoscale communications can be predicted and analyzed. Such standard parameters help in calibrating an analytical model to a physical network allowing for synchronization between analytical and experimental results.
- 20 May 2011
- Published by Springer Nature in Frontiers of Computer Science in China
- Vol. 5 (3) , 316-326
Toward in vivo nanoscale communication networks: utilizing an active network architecture
- 20 May 2011
- Published by Springer Nature in Frontiers of Computer Science in China
- Vol. 5 (3) , 316-326
Toward in vivo nanoscale communication networks: utilizing an active network architecture
- 23 April 2010
- Published by SPIE-Intl Soc Optical Eng
- p. 76680M-76680M-12
A comparative study of four change detection methods for aerial photography applications
We present four new change detection methods that create an automated change map from a probability map. In this case, the probability map was derived from a 3D model. The primary application of interest is aerial photographic applications, where the appearance, disappearance or change in position of small objects of a selectable class (e.g., cars) must be detected at a high success rate in spite of variations in magnification, lighting and background across the image. The methods rely on an earlier derivation of a probability map. We describe the theory of the four methods, namely Bernoulli variables, Markov Random Fields, connected change, and relaxation-based segmentation, evaluate and compare their performance experimentally on a set probability maps derived from aerial photographs.
- 23 April 2010
- Published by SPIE-Intl Soc Optical Eng
- p. 76680M-76680M-12
A comparative study of four change detection methods for aerial photography applications
We present four new change detection methods that create an automated change map from a probability map. In this case, the probability map was derived from a 3D model. The primary application of interest is aerial photographic applications, where the appearance, disappearance or change in position of small objects of a selectable class (e.g., cars) must be detected at a high success rate in spite of variations in magnification, lighting and background across the image. The methods rely on an earlier derivation of a probability map. We describe the theory of the four methods, namely Bernoulli variables, Markov Random Fields, connected change, and relaxation-based segmentation, evaluate and compare their performance experimentally on a set probability maps derived from aerial photographs.
- 3 November 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications
- Vol. 16 (5) , 6-7
Wireless ad hoc nanoscale networking
Wireless ad hoc communication on the nanoscale will require thinking outside of the traditional radio spectrum. New applications will utilize new forms of wireless communication channels. For example, nanoscale communication will enable precise mechanisms for directly interacting with cells in vivo. Information may be sent to and from specific cells within the body, allowing detection and healing of diseases on the cellular scale. From a medical standpoint, the use of current wireless techniques to communicate with implants is unacceptable for many reasons, including bulky size, inability to use magnetic resonance imaging after implantation, potential radiation damage, surgical invasiveness, need to recharge/replace power, post-operative pain and long recovery times, and reduced quality of life for the patient. Better, more human in vivo implant communication is needed. Development of both biological and engineered nanomachines is progressing; such machines will need to communicate. Unfortunately, networking vast collections of nanoscale sensors and robots using current techniques, including wireless techniques, is not possible without communication mechanisms that exceed nanoscale volumes.
- 3 November 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Wireless Communications
- Vol. 16 (5) , 6-7
Wireless ad hoc nanoscale networking
Wireless ad hoc communication on the nanoscale will require thinking outside of the traditional radio spectrum. New applications will utilize new forms of wireless communication channels. For example, nanoscale communication will enable precise mechanisms for directly interacting with cells in vivo. Information may be sent to and from specific cells within the body, allowing detection and healing of diseases on the cellular scale. From a medical standpoint, the use of current wireless techniques to communicate with implants is unacceptable for many reasons, including bulky size, inability to use magnetic resonance imaging after implantation, potential radiation damage, surgical invasiveness, need to recharge/replace power, post-operative pain and long recovery times, and reduced quality of life for the patient. Better, more human in vivo implant communication is needed. Development of both biological and engineered nanomachines is progressing; such machines will need to communicate. Unfortunately, networking vast collections of nanoscale sensors and robots using current techniques, including wireless techniques, is not possible without communication mechanisms that exceed nanoscale volumes.
- 1 June 2009
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 42 (5) , 293-298
Active Probing for Diagnosis of Emergent Faults
- 1 June 2009
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 42 (5) , 293-298
Active Probing for Diagnosis of Emergent Faults