Yang Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yang Zhou has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Bin Xu
State Key Laboratory of Coastal and Offshore Engineering, Dalian Univ. of Technology, Dalian 116024, China
5 shared publicationsRui Pang
School of Hydraulic Engineering, Faculty of Infrastructure Engineering, Dalian Univ. of Technology, Dalian 116024, China
4 shared publicationsDegao Zou
2 shared publicationsXianjing Kong
2 shared publications- Bin Xu
School of Infrastructure Engineering, Dalian University of Technology, Dalian, China
1 shared publication Gao Lin
1 shared publication
Latest Publications
- 1 May 2022
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 22 (5) , 04022038
Dynamic Reliability Analysis of the Stability of the 3D Slope of a Rockfill Dam Based on the Copula Function and Generalized Probability Density Evolution Method
Rockfill strength parameters are important indicators of the stability of a rockfill dam slope. Therefore, a rational representation of the distribution characteristics of these parameters is extremely important to accurately assess the stability of the dynamic response and reliability of the three-dimensional (3D) slope of a rockfill dam. A joint distribution model of the rockfill strength parameters is constructed in this study using the copula function. In addition, a dynamic reliability analysis method for slope stability is proposed using a number-theoretical method and the generalized probability density evolution method (GPDEM). First, the method is validated by comparing the results for a numerical example with those obtained by Monte Carlo simulation (MCS). Second, the traditional and proposed joint distribution models are comparatively analyzed in terms of the dynamic response and reliability. Finally, the effect of the type of copula function on the dynamic reliability of the slope is investigated. The results show that the copula theory, the number-theoretical method, and the GPDEM provide an effective approach to analyze the dynamic response and reliability of slope stability. The randomness of rockfill strength parameters is sensitive to the safety factor of the slope stability of rockfill dams. The reliability analysis method can reasonably characterize the influence of strength parameter uncertainty on dam slope stability, which makes up for the deficiency of using a single safety measurement standard in the deterministic analysis method. The copula function can reasonably characterize the nonnormal distribution characteristics of rockfill strength parameters, improve the calculation accuracy of the slope stability reliability of rockfill dams, and provide an important scientific basis for the accurate safety assessment of dam slope stability. The type of copula function has an important impact on the dynamic reliability results for slope stability. Thus, it is extremely important to build a joint distribution model of rockfill strength parameters based on a rational selection of the optimal copula function.
- 1 May 2022
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 22 (5) , 04022038
Dynamic Reliability Analysis of the Stability of the 3D Slope of a Rockfill Dam Based on the Copula Function and Generalized Probability Density Evolution Method
Rockfill strength parameters are important indicators of the stability of a rockfill dam slope. Therefore, a rational representation of the distribution characteristics of these parameters is extremely important to accurately assess the stability of the dynamic response and reliability of the three-dimensional (3D) slope of a rockfill dam. A joint distribution model of the rockfill strength parameters is constructed in this study using the copula function. In addition, a dynamic reliability analysis method for slope stability is proposed using a number-theoretical method and the generalized probability density evolution method (GPDEM). First, the method is validated by comparing the results for a numerical example with those obtained by Monte Carlo simulation (MCS). Second, the traditional and proposed joint distribution models are comparatively analyzed in terms of the dynamic response and reliability. Finally, the effect of the type of copula function on the dynamic reliability of the slope is investigated. The results show that the copula theory, the number-theoretical method, and the GPDEM provide an effective approach to analyze the dynamic response and reliability of slope stability. The randomness of rockfill strength parameters is sensitive to the safety factor of the slope stability of rockfill dams. The reliability analysis method can reasonably characterize the influence of strength parameter uncertainty on dam slope stability, which makes up for the deficiency of using a single safety measurement standard in the deterministic analysis method. The copula function can reasonably characterize the nonnormal distribution characteristics of rockfill strength parameters, improve the calculation accuracy of the slope stability reliability of rockfill dams, and provide an important scientific basis for the accurate safety assessment of dam slope stability. The type of copula function has an important impact on the dynamic reliability results for slope stability. Thus, it is extremely important to build a joint distribution model of rockfill strength parameters based on a rational selection of the optimal copula function.
- 5 October 2020
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 143 (2)
On Investigation of Liquid Sloshing in Cylindrical Tanks With Single and Multiply Connected Domains Using Isogeometric Boundary Element Method
This paper explores an isogeometric boundary element method (IGA-BEM) for sloshing problems in cylindrical tanks with single and multiply connected domains. Instead of the Lagrange basis functions used in the standard BEM, the nonuniform rational B-splines (NURBS) basis functions are introduced to approximate the geometries of the problem boundaries and the unknown variables. Compared with the Lagrange basis functions, NURBS basis functions can accurately reconstruct the geometric boundary of analysis domain with almost no error, and all the data information for NURBS basis functions can be directly obtained from the computer-aided design (cad) or computer-aided engineering (cae) commercial software, which implies the modeling process of IGA-BEM is more simple than that of the standard BEM. NURBS makes it possible for the IGA-BEM to realize the seamless connection between cad and cae software with relative higher calculation accuracy than the standard BEM. Based on the weighted residual method as well as the divergence theorem, the IGA-BEM is developed for the single and multiply connected domains, whose boundaries are separately defined in the parameter space by different knot vectors. The natural sloshing frequencies of the liquid sloshing in a circular cylindrical tank with a coaxial or an off-center circular pipe, an elliptical cylindrical tank with an elliptical pipe, a circular cylindrical tank with multiple pipes are estimated with the introduced method by assuming an ideal (inviscid and incompressible) liquid, irrotational small-amplitude sloshing, and the linear free-surface condition. The comparison between the results obtained by the proposed method and those in the existing literatures shows very good agreements, which verifies the proposed model well. Meanwhile, the effects of radius ratio, liquid depth, number, and location of internal pipe (pipes) on the natural sloshing frequency and sloshing mode are analyzed carefully, and some conclusions are outlined finally.
- 5 October 2020
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 143 (2)
On Investigation of Liquid Sloshing in Cylindrical Tanks With Single and Multiply Connected Domains Using Isogeometric Boundary Element Method
This paper explores an isogeometric boundary element method (IGA-BEM) for sloshing problems in cylindrical tanks with single and multiply connected domains. Instead of the Lagrange basis functions used in the standard BEM, the nonuniform rational B-splines (NURBS) basis functions are introduced to approximate the geometries of the problem boundaries and the unknown variables. Compared with the Lagrange basis functions, NURBS basis functions can accurately reconstruct the geometric boundary of analysis domain with almost no error, and all the data information for NURBS basis functions can be directly obtained from the computer-aided design (cad) or computer-aided engineering (cae) commercial software, which implies the modeling process of IGA-BEM is more simple than that of the standard BEM. NURBS makes it possible for the IGA-BEM to realize the seamless connection between cad and cae software with relative higher calculation accuracy than the standard BEM. Based on the weighted residual method as well as the divergence theorem, the IGA-BEM is developed for the single and multiply connected domains, whose boundaries are separately defined in the parameter space by different knot vectors. The natural sloshing frequencies of the liquid sloshing in a circular cylindrical tank with a coaxial or an off-center circular pipe, an elliptical cylindrical tank with an elliptical pipe, a circular cylindrical tank with multiple pipes are estimated with the introduced method by assuming an ideal (inviscid and incompressible) liquid, irrotational small-amplitude sloshing, and the linear free-surface condition. The comparison between the results obtained by the proposed method and those in the existing literatures shows very good agreements, which verifies the proposed model well. Meanwhile, the effects of radius ratio, liquid depth, number, and location of internal pipe (pipes) on the natural sloshing frequency and sloshing mode are analyzed carefully, and some conclusions are outlined finally.
- 1 January 2019
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 116, 82-85
Seismic performance investigation of high CFRDs subjected to mainshock-aftershock sequences
- 1 January 2019
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 116, 82-85
Seismic performance investigation of high CFRDs subjected to mainshock-aftershock sequences
- 1 December 2018
- Published by Elsevier in Applied Ocean Research
- Vol. 81, 47-71
High performance analysis of lateral sloshing response in vertical cylinders with dual circular or arc-shaped porous structures
- 1 December 2018
- Published by Elsevier in Applied Ocean Research
- Vol. 81, 47-71
High performance analysis of lateral sloshing response in vertical cylinders with dual circular or arc-shaped porous structures
- 1 November 2018
- Published by Elsevier in Engineering Geology
- Vol. 246, 391-401
Seismic performance evaluation of high CFRD slopes subjected to near-fault ground motions based on generalized probability density evolution method
- 1 November 2018
- Published by Elsevier in Engineering Geology
- Vol. 246, 391-401
Seismic performance evaluation of high CFRD slopes subjected to near-fault ground motions based on generalized probability density evolution method
- 1 November 2018
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 114, 438-447
Influence of strong motion duration on the seismic performance of high CFRDs based on elastoplastic analysis
- 1 November 2018
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 114, 438-447
Influence of strong motion duration on the seismic performance of high CFRDs based on elastoplastic analysis
- Open Access
- 10 August 2018
- Published by SAGE Publications in International Journal of Distributed Sensor Networks
- Vol. 14 (8)
A three-dimensional elasto-plastic dynamic response procedure for concrete-faced rockfill dams
Equivalent linear dynamic analysis is the primary method of analysis for concrete-faced rockfill dams during earthquake. However, this method cannot be directly used to estimate permanent deformation during earthquake, which is important to evaluate the dynamic safety of concrete-faced rockfill dams. To bridge this gap, an elasto-plastic dynamic response procedure based on finite element method is presented to estimate the construction, impoundment, and dynamic characteristics of concrete-faced rockfill dams. This procedure involves a generalized plasticity model for rockfill materials and an ideal elasto-plastic model for interface between concrete face slab and rockfill material. The construction, impounding process, and seismic behavior of a 150-m-tall concrete-faced rockfill dam were simulated using seismic motion based on Chinese code for seismic design of hydraulic structures of hydropower project with the peak ground acceleration of 0.3g as an excitation to validate the procedure. On the basis of the numerical simulation results of the step-by-step construction, reservoir impoundment and seismic response of a concrete-faced rockfill dam, dam settlement, joint deformation, stress, and deformation of slab were analyzed. The results indicate that the dam settlement and deformation of joint can be directly obtained by the procedure during earthquake. The construction, impoundment, and seismic analysis could be considered in one procedure.
- 10 August 2018
- Published by SAGE Publications in International Journal of Distributed Sensor Networks
- Vol. 14 (8)
Open AccessA three-dimensional elasto-plastic dynamic response procedure for concrete-faced rockfill dams
Equivalent linear dynamic analysis is the primary method of analysis for concrete-faced rockfill dams during earthquake. However, this method cannot be directly used to estimate permanent deformation during earthquake, which is important to evaluate the dynamic safety of concrete-faced rockfill dams. To bridge this gap, an elasto-plastic dynamic response procedure based on finite element method is presented to estimate the construction, impoundment, and dynamic characteristics of concrete-faced rockfill dams. This procedure involves a generalized plasticity model for rockfill materials and an ideal elasto-plastic model for interface between concrete face slab and rockfill material. The construction, impounding process, and seismic behavior of a 150-m-tall concrete-faced rockfill dam were simulated using seismic motion based on Chinese code for seismic design of hydraulic structures of hydropower project with the peak ground acceleration of 0.3g as an excitation to validate the procedure. On the basis of the numerical simulation results of the step-by-step construction, reservoir impoundment and seismic response of a concrete-faced rockfill dam, dam settlement, joint deformation, stress, and deformation of slab were analyzed. The results indicate that the dam settlement and deformation of joint can be directly obtained by the procedure during earthquake. The construction, impoundment, and seismic analysis could be considered in one procedure.
- Open Access
- 1 January 2014
- Published by Wiley in The Scientific World Journal
- Vol. 2014, 1-5
Numerical Simulation on Slabs Dislocation of Zipingpu Concrete Faced Rockfill Dam during the Wenchuan Earthquake Based on a Generalized Plasticity Model
After the Wenchuan earthquake in 2008, the Zipingpu concrete faced rockfill dam (CFRD) was found slabs dislocation between different stages slabs and the maximum value reached 17 cm. This is a new damage pattern and did not occur in previous seismic damage investigation. Slabs dislocation will affect the seepage control system of the CFRD gravely and even the safety of the dam. Therefore, investigations of the slabs dislocation’s mechanism and development might be meaningful to the engineering design of the CFRD. In this study, based on the previous studies by the authors, the slabs dislocation phenomenon of the Zipingpu CFRD was investigated. The procedure and constitutive model of materials used for finite element analysis are consistent. The water elevation, the angel, and the strength of the construction joints were among major variables of investigation. The results indicated that the finite element procedure based on a modified generalized plasticity model and a perfect elastoplastic interface model can be used to evaluate the dislocation damage of face slabs of concrete faced rockfill dam during earthquake. The effects of the water elevation, the angel, and the strength of the construction joints are issues of major design concern under seismic loading.
- 1 January 2014
- Published by Wiley in The Scientific World Journal
- Vol. 2014, 1-5
Open AccessNumerical Simulation on Slabs Dislocation of Zipingpu Concrete Faced Rockfill Dam during the Wenchuan Earthquake Based on a Generalized Plasticity Model
After the Wenchuan earthquake in 2008, the Zipingpu concrete faced rockfill dam (CFRD) was found slabs dislocation between different stages slabs and the maximum value reached 17 cm. This is a new damage pattern and did not occur in previous seismic damage investigation. Slabs dislocation will affect the seepage control system of the CFRD gravely and even the safety of the dam. Therefore, investigations of the slabs dislocation’s mechanism and development might be meaningful to the engineering design of the CFRD. In this study, based on the previous studies by the authors, the slabs dislocation phenomenon of the Zipingpu CFRD was investigated. The procedure and constitutive model of materials used for finite element analysis are consistent. The water elevation, the angel, and the strength of the construction joints were among major variables of investigation. The results indicated that the finite element procedure based on a modified generalized plasticity model and a perfect elastoplastic interface model can be used to evaluate the dislocation damage of face slabs of concrete faced rockfill dam during earthquake. The effects of the water elevation, the angel, and the strength of the construction joints are issues of major design concern under seismic loading.