Xihong Ding
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xihong Ding has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
Demeng Qian
Jointly Constructed Key Laboratory of Power and Storage Batteries of Anhui Province
2 shared publicationsHui Chen
Jointly Constructed Key Laboratory of Power and Storage Batteries of Anhui Province
2 shared publicationsHui Wang
Jointly Constructed Key Laboratory of Power and Storage Batteries of Anhui Province
2 shared publications- Songyuan Dai
Beijing Key Laboratory of Novel Thin‐Film Solar Cells North China Electric Power University Beijing 102206 China
2 shared publications Tengda Xu
Jointly Constructed Key Laboratory of Power and Storage Batteries of Anhui Province
2 shared publicationsWei Hong
Jointly Constructed Key Laboratory of Power and Storage Batteries of Anhui Province
2 shared publications
Latest Publications
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
Flat-lying adsorption of a zwitterionic dipeptide reshapes the water-in-salt/carbon interface
Interfacial adsorption of a zwitterionic dipeptide lies flat on graphitic carbon and co-organizes acetate and K⁺ into a mixed patch, promoting K⁺ desolvation and slowing interfacial water exchange without perturbing the bulk electrolyte.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
Flat-lying adsorption of a zwitterionic dipeptide reshapes the water-in-salt/carbon interface
Interfacial adsorption of a zwitterionic dipeptide lies flat on graphitic carbon and co-organizes acetate and K⁺ into a mixed patch, promoting K⁺ desolvation and slowing interfacial water exchange without perturbing the bulk electrolyte.
- 28 August 2025
- Published by American Chemical Society (ACS) in Langmuir
Amidinium versus Ammonium Ligands for Thermal Stability and Efficiency Boost in CsPbI3 Perovskite Solar Cells
Inorganic CsPbI3 perovskite solar cells (PSCs) hold notable promise but suffer from instability in maintaining the photoactive black phase under ambient and thermal conditions; this work systematically investigates the impacts of p-phenylenediamine dihydrochloride (PPD·2HCl, containing ammonium groups) and terephthalimidamide dihydrochloride (TPID·2HCl, featuring amidinium groups) ligands on device performance and stability, with a focus on dissecting TPID's thermal stabilization mechanisms. While both ligands enhance room-temperature phase stability via surface defect passivation, TPID·2HCl-treated devices exhibit superior thermal resilience: its amidinium group features delocalized electron density across the N-C-N skeleton, strengthening coordination with undercoordinated sites and mitigating lattice distortion under heat; thermogravimetric analysis (TGA) shows TPID·2HCl decomposes at ∼350 °C with gradual mass loss, surpassing PPD·2HCl's rapid degradation at ∼300 °C; density functional theory (DFT) calculations reveal TPID2+ binds more strongly to the CsPbI3 surface (adsorption energy: -1.51 eV vs -1.18 eV for PPD2+), ensuring stable surface interaction; X-ray photoelectron spectroscopy (XPS) confirms TPID·2HCl retains its chemical environment even after 100 °C aging for 150 min, whereas PPD·2HCl dissociates. These mechanisms collectively boost device performance, with TPID·2HCl-treated cells achieving a power conversion efficiency (PCE) of 18.59% (vs 17.23% for PPD·2HCl and 16.22% for untreated) and delaying efficiency decay at 85 °C, highlighting amidinium ligands as a viable approach to enhance CsPbI3 stability under thermal stress.
- 28 August 2025
- Published by American Chemical Society (ACS) in Langmuir
Amidinium versus Ammonium Ligands for Thermal Stability and Efficiency Boost in CsPbI3 Perovskite Solar Cells
Inorganic CsPbI3 perovskite solar cells (PSCs) hold notable promise but suffer from instability in maintaining the photoactive black phase under ambient and thermal conditions; this work systematically investigates the impacts of p-phenylenediamine dihydrochloride (PPD·2HCl, containing ammonium groups) and terephthalimidamide dihydrochloride (TPID·2HCl, featuring amidinium groups) ligands on device performance and stability, with a focus on dissecting TPID's thermal stabilization mechanisms. While both ligands enhance room-temperature phase stability via surface defect passivation, TPID·2HCl-treated devices exhibit superior thermal resilience: its amidinium group features delocalized electron density across the N-C-N skeleton, strengthening coordination with undercoordinated sites and mitigating lattice distortion under heat; thermogravimetric analysis (TGA) shows TPID·2HCl decomposes at ∼350 °C with gradual mass loss, surpassing PPD·2HCl's rapid degradation at ∼300 °C; density functional theory (DFT) calculations reveal TPID2+ binds more strongly to the CsPbI3 surface (adsorption energy: -1.51 eV vs -1.18 eV for PPD2+), ensuring stable surface interaction; X-ray photoelectron spectroscopy (XPS) confirms TPID·2HCl retains its chemical environment even after 100 °C aging for 150 min, whereas PPD·2HCl dissociates. These mechanisms collectively boost device performance, with TPID·2HCl-treated cells achieving a power conversion efficiency (PCE) of 18.59% (vs 17.23% for PPD·2HCl and 16.22% for untreated) and delaying efficiency decay at 85 °C, highlighting amidinium ligands as a viable approach to enhance CsPbI3 stability under thermal stress.
- 4 March 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (10) , 7111-7117
2-Aminoethanethiol Hydroiodate Additives Induced Phase Stability Improvement of CsPbI3 Films for Use in Inorganic Perovskite Solar Cells
This study investigates the role of 2-aminoethanethiol hydroiodate (2-AET·HI) additives in enhancing the phase stability and photovoltaic performance of CsPbI3 films for inorganic perovskite solar cells. The incorporation of 2-AET·HI into the precursor solution results in a more uniform and compact film morphology. X-ray diffraction (XRD) analysis reveals that the 2-AET·HI-treated CsPbI3 films retain their black α-phase, even after 300 h at 25% RH and ∼25 °C, whereas the control samples show a rapid transition to the nonphotoactive δ-phase. This improvement in phase stability is reflected in the enhanced photovoltaic performance, with the 2-AET·HI-modified devices exhibiting a power conversion efficiency (PCE) of 16.7%, compared to 15.4% for the control devices. Furthermore, the 2-AET·HI-modified devices display superior long-term stability, retaining 83% of their initial PCE after 192 h in ambient conditions, in stark contrast to the unmodified devices, which degrade rapidly.
- 4 March 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (10) , 7111-7117
2-Aminoethanethiol Hydroiodate Additives Induced Phase Stability Improvement of CsPbI3 Films for Use in Inorganic Perovskite Solar Cells
This study investigates the role of 2-aminoethanethiol hydroiodate (2-AET·HI) additives in enhancing the phase stability and photovoltaic performance of CsPbI3 films for inorganic perovskite solar cells. The incorporation of 2-AET·HI into the precursor solution results in a more uniform and compact film morphology. X-ray diffraction (XRD) analysis reveals that the 2-AET·HI-treated CsPbI3 films retain their black α-phase, even after 300 h at 25% RH and ∼25 °C, whereas the control samples show a rapid transition to the nonphotoactive δ-phase. This improvement in phase stability is reflected in the enhanced photovoltaic performance, with the 2-AET·HI-modified devices exhibiting a power conversion efficiency (PCE) of 16.7%, compared to 15.4% for the control devices. Furthermore, the 2-AET·HI-modified devices display superior long-term stability, retaining 83% of their initial PCE after 192 h in ambient conditions, in stark contrast to the unmodified devices, which degrade rapidly.
- 15 October 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (47) , 12912-12918
A star-shaped carbazole-based hole-transporting material with triphenylamine side arms for perovskite solar cells
Herein, we employ a simple star-shaped hole-transporting material (HTM) consisting of a carbazole core and triphenylamine side arms, termed LD29, in mesoscopic perovskite solar cells (PSCs). LD29 exhibits a deep HOMO level of −5.24 eV, a high hole mobility of 1.72 × 10−5 cm2 V−1 s−1, and a relatively high glass-transition temperature of 121 °C, as well as good film-forming ability. PSCs using dopant-free LD29 as the HTM layer exhibit a maximum efficiency of 14.29%. Promisingly, when LD29 is doped, a champion efficiency over 18% has been achieved, which is even comparable with that of the conventional doped spiro-OMeTAD. Moreover, the laboratory synthesis cost for LD29 is significantly lower than that for spiro-OMeTAD. Importantly, the PSC performance does not change greatly with the concentration of LD29 regardless of whether the dopants are used, which has the potential to further reduce material usage. The device employing LD29 also shows comparable stability to that employing spiro-OMeTAD. Consequently, our results provide an important step forward for the commercialized application of PSCs.
- 15 October 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 6 (47) , 12912-12918
A star-shaped carbazole-based hole-transporting material with triphenylamine side arms for perovskite solar cells
Herein, we employ a simple star-shaped hole-transporting material (HTM) consisting of a carbazole core and triphenylamine side arms, termed LD29, in mesoscopic perovskite solar cells (PSCs). LD29 exhibits a deep HOMO level of −5.24 eV, a high hole mobility of 1.72 × 10−5 cm2 V−1 s−1, and a relatively high glass-transition temperature of 121 °C, as well as good film-forming ability. PSCs using dopant-free LD29 as the HTM layer exhibit a maximum efficiency of 14.29%. Promisingly, when LD29 is doped, a champion efficiency over 18% has been achieved, which is even comparable with that of the conventional doped spiro-OMeTAD. Moreover, the laboratory synthesis cost for LD29 is significantly lower than that for spiro-OMeTAD. Importantly, the PSC performance does not change greatly with the concentration of LD29 regardless of whether the dopants are used, which has the potential to further reduce material usage. The device employing LD29 also shows comparable stability to that employing spiro-OMeTAD. Consequently, our results provide an important step forward for the commercialized application of PSCs.
- 13 September 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (37) , 18258-18266
Triple cation additive NH3+C2H4NH2+C2H4NH3+-induced phase-stable inorganic α-CsPbI3 perovskite films for use in solar cells
We demonstrate that employing a small quantity of triple cation NH3+C2H4NH2+C2H4NH3+ (denoted as DETA3+) could effectively stabilize mutable α-CsPbI3 for 60 d via a facile one-step deposition method without any encapsulation.
- 13 September 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (37) , 18258-18266
Triple cation additive NH3+C2H4NH2+C2H4NH3+-induced phase-stable inorganic α-CsPbI3 perovskite films for use in solar cells
We demonstrate that employing a small quantity of triple cation NH3+C2H4NH2+C2H4NH3+ (denoted as DETA3+) could effectively stabilize mutable α-CsPbI3 for 60 d via a facile one-step deposition method without any encapsulation.