New-generation small animal positron emission tomography system for molecular imaging
Authors:
- 12 January 2017
- journal article
- Published by SPIE-Intl Soc Optical Eng in Journal of Medical Imaging
- Vol. 4 (01) , 011008-7
Abstract
The next generation of discoveries in molecular imaging requires positron emission tomography (PET) systems with high spatial resolution and high sensitivity to visualize and quantify low concentrations of molecular probes. The goal of this work is to assemble and explore such a system. We use cadmium zinc telluride (CZT) to achieve high spatial resolution, three-dimensional interaction positioning, and excellent energy resolution. The CZT crystals are arranged in an edge-on configuration with a minimum gap of 50 μm in a four-sided panel geometry to achieve superior photon sensitivity. The developed CZT detectors and readout electronics were scaled up to complete significant portions of the final PET system. The steering electrode bias and the amplitude of the analog signals for time measurement were optimized to improve performance. The energy resolution (at 511 keV) over 468 channels is 7.43±1.02% full-width-at-half-maximum (FWHM). The spatial resolution is 0.76±0.1 mm FWHM. The time resolution of six CZT crystals in coincidence with six other CZT crystals is 37 ns. With high energy and spatial resolution and the relatively low random rate for small animal imaging, this system shows promise to be very useful for molecular imaging studies.Keywords
Funding Information
- National Institutes of Health (R01 CA120474)
- Stanford Molecular Imaging Scholars Program (R25 CA118681)
This publication has 6 references indexed in Scilit:
- Study of electrode pattern design for a CZT-based PET detectorPhysics in Medicine & Biology, 2014
- Investigation of the limitations of the highly pixilated CdZnTe detector for PET applicationsPhysics in Medicine & Biology, 2012
- Study of a high-resolution, 3D positioning cadmium zinc telluride detector for PETPhysics in Medicine & Biology, 2011
- Convex Optimization of Coincidence Time Resolution for a High-Resolution PET SystemIEEE Transactions on Medical Imaging, 2010
- Fabrication and characterization of a 0.5-mm lutetium oxyorthosilicate detector array for high-resolution PET applications.2007
- The 2006 Henry N. Wagner Lecture: Of mice and men (and positrons)--advances in PET imaging technology.2006