Effect of Nanoclay and Cross-Linking Degree on the Properties of Alginate-Based Nanocomposite Film
- 22 July 2013
- journal article
- research article
- Published by Hindawi Limited in Journal of Food Processing and Preservation
- Vol. 38 (4) , 1622-1631
Abstract
Montmorillonite nanoclay (MMT) and CaCl2-reinforced alginate-based nanocomposite film was prepared by solvent casting method. The combined effect of nanoclay addition and internal cross-linking degree on the mechanical and physical properties of the obtained nanocomposites was evaluated. The MMT concentration was 3% and CaCl2 content in the matrix was varied from 0.01 to 0.03 ([w/w] % dry matrix). Results showed that the water vapor permeability and water solubility of the nanocomposite films significantly (P < 0.05) decreased about 30% and 39%, respectively, with the addition of MMT and CaCl2. Incorporation of both nanofiller and cross-linking agent also improved the mechanical performance of the nanocomposites (increase in tensile strength up to 36%) compared to the neat alginate film. Nevertheless, hydrophilicity of the nanocomposite films increased with incorporating both nanoclay and CaCl2, resulted in decreased contact angle. Results on X-ray diffraction revealed well-developed exfoliated nanocomposite films at 3 wt % of nanoclay addition. Practical Applications The importance of packaging in the food supply chain is fully recognized. In the last two decades, due to increasing environmental concerns, great efforts have been expended to extend food shelf life and quality while reducing post-consumption disposal waste of packaging materials. These endeavors have led to the development of new bio-packaging materials called biodegradable films, produced using biopolymers. These polymers are considered environmentally friendly and attractive materials with interesting properties and functionalities that can improve food preservation in the film form.Keywords
This publication has 48 references indexed in Scilit:
- A novel active bionanocomposite film incorporating rosemary essential oil and nanoclay into chitosanJournal of Food Engineering, 2012
- Physical, mechanical and antibacterial properties of alginate film: Effect of the crosslinking degree and oregano essential oil concentrationJournal of Food Engineering, 2012
- HPMC reinforced with different cellulose nano-particlesCarbohydrate Polymers, 2011
- Rheological, electrokinetic, and morphological characterization of alginate–bentonite biocompositesJournal of Applied Polymer Science, 2011
- Physicochemical properties of starch–CMC–nanoclay biodegradable filmsInternational Journal of Biological Macromolecules, 2010
- Chitosan/clay films' properties as affected by biopolymer and clay micro/nanoparticles' concentrationsFood Hydrocolloids, 2009
- Preparation and properties of rice starch–chitosan blend biodegradable filmLWT, 2008
- Green composites reinforced with hemp nanocrystals in plasticized starchJournal of Applied Polymer Science, 2008
- Mechanisms of external and internal gelation and their impact on the functions of alginate as a coat and delivery systemCarbohydrate Polymers, 2006
- Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materialsMaterials Science and Engineering: R: Reports, 2000