Fatigue and quasi‐static mechanical behavior of bio‐degradable porous biomaterials based on magnesium alloys
Open Access
- 8 March 2018
- journal article
- research article
- Published by Wiley in Journal of Biomedical Materials Research Part A
- Vol. 106 (7) , 1798-1811
Abstract
Magnesium and its alloys have the intrinsic capability of degrading over timein vivowithout leaving toxic degradation products. They are therefore suitable for use as biodegradable scaffolds that are replaced by the regenerated tissues. One of the main concerns for such applications, particularly in load‐bearing areas, is the sufficient mechanical integrity of the scaffold before sufficient volumes ofde novotissue is generated. In the majority of the previous studies on the effects of biodegradation on the mechanical properties of porous biomaterials, the change in the elastic modulus has been studied. In this study, variations in the static and fatigue mechanical behavior of porous structures made of two different Mg alloys (AZ63 and M2) over different dissolution times (,, and) have been investigated. The results showed an increase in the mechanical properties obtained from stress–strain curve (elastic modulus, yield stress, plateau stress, and energy absorption) afterand a sharp decrease after. The initial increase in the mechanical properties may be attributed to the accumulation of corrosion products in the pores of the porous structure before degradation has considerably proceeded. The effects of mineral deposition was more pronounced for the elastic modulus as compared to other mechanical properties. That may be due to insufficient integration of the deposited particles in the structure of the magnesium alloys. While the bonding of the parts being combined in a composite‐like material is of great importance in determining its yield stress, the effects of bonding strength of both parts is much lower in determining the elastic modulus. The results of the current study also showed that the dissolution rates of the studied Mg alloys were too high for direct use in human body. © 2018 Authors Journal of Biomedical Materials Research Part A Published by Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 1798–1811, 2018.Keywords
This publication has 46 references indexed in Scilit:
- Porous Biodegradable Metals for Hard Tissue Scaffolds: A ReviewInternational Journal of Biomaterials, 2012
- Effects of Zn on the microstructure, mechanical property and bio-corrosion property of Mg–3Ca alloys for biomedical applicationMaterials Chemistry and Physics, 2011
- Synthesis of topologically-ordered open-cell porous magnesiumMaterials Letters, 2010
- Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids☆Acta Biomaterialia, 2010
- Influence of halides on the dissolution and passivation behavior of AZ91D magnesium alloy in aqueous solutionsElectrochimica Acta, 2009
- Influence of Ca on the corrosion properties of magnesium for biomaterialsMaterials Letters, 2008
- Biomaterials in orthopaedicsJournal of The Royal Society Interface, 2008
- How Many Steps/Day Are Enough?Sports Medicine, 2004
- Compressibility of porous magnesium foam: dependency on porosity and pore sizeMaterials Letters, 2004
- Understanding Magnesium Corrosion—A Framework for Improved Alloy PerformanceAdvanced Engineering Materials, 2003