Low‐temperature compounding of flax fibers with polyamide 6 via solid‐state shear pulverization: Towards viable natural fiber composites with engineering thermoplastics
- 24 December 2018
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 40 (8) , 3285-3295
Abstract
Low‐temperature compounding of natural fiber/thermoplastic composites via solid‐state shear pulverization (SSSP) is explored for the first time, with a goal of processing temperature‐sensitive natural fibers with high temperature‐melting engineering thermoplastics without fiber degradation. The model study was based on polyamide 6 (PA6) as the matrix material and short flax fibers as the filler materials; flax fiber type was varied to provide a range of comparison. Composite structural characterization was conducted using computer tomography, optical microscopy, and scanning electron microscopy, while mechanical property measurements were performed on injection molded specimens in both tension and bending. SSSP demonstrated robust and effective processing results in model PA6/flax composites, especially when compared with conventional extrusion. SSSP was able to isolate unmodified scutched fibers into individual elementary fibers with minimal scission, and effectively distribute them in the polymer matrix in situ. The dispersed and distributed filler morphology led to mechanical property enhancements, including 230% and 40% increases in Young's modulus and tensile strength, respectively, compared with neat PA6, at a 20 vol% fiber content. POLYM. COMPOS., 40:3285–3295, 2019. © 2018 Society of Plastics EngineersKeywords
Funding Information
- National Science Foundation (CMMI‐0820993)
This publication has 56 references indexed in Scilit:
- Green composites: A review of adequate materials for automotive applicationsComposites Part B: Engineering, 2013
- Polylactide-Based Renewable Green Composites from Agricultural Residues and Their HybridsBiomacromolecules, 2010
- Effect of Compounding and Injection Molding on the Mechanical Properties of Flax Fiber Polypropylene CompositesJournal of Reinforced Plastics and Composites, 2009
- The water vapor sorption behavior of natural fibersJournal of Applied Polymer Science, 2009
- Cellulose Fibrils for Polymer ReinforcementAdvanced Engineering Materials, 2004
- Surface characterization of flax, hemp and cellulose fibers; Surface properties and the water uptake behaviorPolymer Composites, 2002
- Novel Strategy for Polymer Blend Compatibilization: Solid-State Shear PulverizationMacromolecules, 1999
- Processing of reinforced plastics using multi‐screw compoundersPolymer Engineering & Science, 1985
- Influence of injection‐molding parameters on the morphology and mechanical properties of glass fiber‐reinforced polypropylene compositesPolymer Composites, 1982
- Techniques for compounding glass fiber‐reinforced thermoplasticsPolymer Engineering & Science, 1977