Abstract
The convective heat transfer in microchannels with the use of nanofluids has proved to be a potential candidate for cooling of micro-electromechanical system devices. The current research article presents the experimental study on fluid flow and heat transfer characteristics of Al2O3 /water nanofluid in a microchannel under thermally developing laminar flow at Reynolds number ranging from 300 to 1000. The experimental set-up of a circular microchannel test section with an inner diameter of 500μm and length of 100mm is fabricated to conduct the experimental study. The effect of nanoparticle concentration (1.0-3.0% ), Reynolds number (300≤Re≤1000 ) on fluid flow and heat transfer characteristics of Al2O3 /water nanofluid have been measured and compared with that of distilled water (DW). The results indicate that the maximum enhancement in local heat transfer coefficient is achieved up to 24.5 % , while friction factor is achieved up to 22.7 % for Al2O3 /water nanofluid with nanoparticle concentration of 3.0 % as compared to DW. The results showed that the performance evaluation criterion of Al2O3 /water nanofluid is greater than unity (η>1.0 ), implying the benefits of nanofluids as compared to DW. Moreover, the predicted data obtained by the present proposed correlations for friction factor and local Nusselt number using Al2O3 /water nanofluid show reasonably good agreement with the deviations of ±5 % and ±10 % , respectively, with the numerical data as compared to the predicted data obtained by the existing correlations available in the literature.

This publication has 73 references indexed in Scilit: