Optimization of Rate Capability and Cyclability Performance in Li3VO4 Anode Material through Ca Doping
Authors:
- 29 August 2017
- journal article
- research article
- Published by Wiley in Chemistry – A European Journal
- Vol. 23 (64) , 16338-16345
Abstract
A series of Ca‐doped lithium vanadates Li3−xCaxVO4 (x=0, 0.01, 0.03, and 0.05) are synthesized successfully through a simple sol‐gel method. XRD patterns and energy‐dispersive X‐ray spectroscopy (EDS) mappings reveal that the doped Ca2+ ions enter into the lattice successfully and are distributed uniformly throughout the Li3VO4 (LVO) grains. XRD spectra and SEM images show that Ca doping can lead to an enlarged lattice and refined Li3VO4 particles. A small quantity of V ions will transfer from V5+ to V4+ in the Ca‐doped samples, as demonstrated by the X‐ray photoelectron spectroscopy (XPS) analysis, which leads to an increase of an order of magnitude in the electronic conductivity. Improved rate capability and cycling stability are observed for the Ca‐doped samples, and Li2.97Ca0.03VO4 exhibits the best electrochemical performance among the studied materials. The initial charge/discharge capacities at 0.1 C increase from 480/645 to 527/702 mA h g−1 as x varies from 0 to 0.03. The charge capacity of Li2.97Ca0.03VO4 at 1 C retains 95.3 % of its initial value after 180 cycles, whereas the capacity retention is only 40 % for the pristine sample. Moreover, Li2.97Ca0.03VO4 maintains a high discharge capacity of 301.7 mA h g−1 at a high discharge rate (4 C), whereas the corresponding value is only 95.2 mA h g−1 for the pristine LVO sample. The enhanced cycling and rate performances are ascribed to the increased lithium ion diffusivity and electrical conductivity induced by Ca doping.Keywords
This publication has 39 references indexed in Scilit:
- Porous micrometer-sized MnO cubes as anode of lithium ion batteryElectrochimica Acta, 2016
- Approaching the Theoretical Capacity of Li3VO4 via Electrochemical ReconstructionAdvanced Materials Interfaces, 2015
- Combining Fast Li-Ion Battery Cycling with Large Volumetric Energy Density: Grain Boundary Induced High Electronic and Ionic Conductivity in Li4Ti5O12 Spheres of Densely Packed NanocrystallitesChemistry of Materials, 2015
- Enhancing the performance of Li 3 VO 4 by combining nanotechnology and surface carbon coating for lithium ion batteriesJournal of Materials Chemistry A, 2015
- Electrochemical characteristics of lithium vanadate, Li3VO4 as a new sort of anode material for Li-ion batteriesJournal of Power Sources, 2014
- Hollow Structured Li3VO4 Wrapped with Graphene Nanosheets in Situ Prepared by a One-Pot Template-Free Method as an Anode for Lithium-Ion BatteriesNano Letters, 2013
- High rate cycling performance of lanthanum-modified Li4Ti5O12 anode materials for lithium-ion batteriesJournal of Power Sources, 2012
- The effect of the charging protocol on the cycle life of a Li-ion batteryJournal of Power Sources, 2006
- Issues and challenges facing rechargeable lithium batteriesNature, 2001
- Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium CellsJournal of the Electrochemical Society, 1995