Developments on Constitutive Material Model for Architectural Soda-Lime Silicate (SLS) Glass and Evaluation of Key Modelling Parameters
Open Access
Abstract
Architectural soda-lime silicate glass (SLS) is increasingly taking on complex shapes that require more detailed numerical analysis. Glass modeling is a thoroughly described topic with validated constitutive models. However, these models require a number of precise material parameters for SLS glass, and these are very sensitive to changes in glass composition. The currently available information is based on SLS glass tested in the late 1990s. As a result, most current publications are based on the above data. The object of this work was to analyze the available sources and update the information on selected key parameters for modeling. Using the currently utilized SLS glass in construction, the coefficient of thermal expansion (CTE), glass transition temperature, and the Young’s modulus have been experimentally investigated. The updated material parameters will allow for more accurate modeling of the SLS glass currently used in construction, and in consequence will make the prototyping process for glass with complex geometries possible to be transferred from the production stage to the design stage, resulting in shorter production times.Keywords
This publication has 53 references indexed in Scilit:
- Finite element implementation of a glass tempering model in three dimensionsComputers & Structures, 2010
- Viscosity of glass-forming liquidsProceedings of the National Academy of Sciences, 2009
- Mechanical response of an oxide glass to mechanical loading—shear and volume relaxation effects: physical analysisActa Materialia, 2000
- THERMAL TEMPERING SIMULATION OF GLASS PLATES: INNER AND EDGE RESIDUAL STRESSESJournal of Thermal Stresses, 1998
- Finite‐Element Calculation of Stresses in Glass Parts Undergoing Viscous RelaxationJournal of the American Ceramic Society, 1987
- Calculation of Residual Stresses in GlassJournal of the American Ceramic Society, 1969
- Solution of Viscoelastic Stress Analysis Problems Using Measured Creep or Relaxation FunctionsJournal of Applied Mechanics, 1963
- Stress Analysis for Linear Viscoelastic MaterialsTransactions of the Society of Rheology, 1959
- The Temperature Dependence of Relaxation Mechanisms in Amorphous Polymers and Other Glass-forming LiquidsJournal of the American Chemical Society, 1955
- THE ATOMIC ARRANGEMENT IN GLASSJournal of the American Chemical Society, 1932