Characteristic of Remelting Ni60 Alloy Coating by High Temperature Resistance Electric Furnace
Authors:
- 1 June 2012
- journal article
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 531, 194-198
Abstract
This paper reports on a new clad technology that is protective coating cladding. The method is that the Ni60 alloy was prepared on 0.45%C steel and high temperature powder paste brushed on the outside. Then the sample after being dried was heated in the high temperature resistance electric furnace. The Ni60 alloy powder on the substrate steel was melted at the appropriate temperature, and a uniform, adherent and non-dilution clad coating was obtained after optimizing the cladding parameters. The coating microstructures, compositions and microhardness were analyzed by OPM, XRD, EPMA, and microhardness testing. The experimental results show that the protective coating cladding is an efficient and economic method in cladding technologiesKeywords
This publication has 2 references indexed in Scilit:
- Structure and erosion resistance of Ni60A/SiC coatting by laser claddingTransactions of Nonferrous Metals Society of China, 2006
- Laser-induced nickel silicide formationThin Solid Films, 1991