Data-Driven Kinematic Modeling and Control of a Cable-Driven Parallel Mechanism Allowing Cables to Wrap on Rigid Bodies
- 2 November 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Automation Science and Engineering
- Vol. 21 (4) , 6587-6601
Abstract
Cable-Driven Parallel Mechanisms (CDPMs) are subject to collision-free constraints from birth to the present. The collision-free constraints confine the workspace of CDPMs. To expand the workspace, scholars suggested allowing cables to wrap on rigid bodies (e.g., the end-effector) in recent years, opening new perspectives for CDPMs. However, the modeling and control of a CDPM with cables wrapped on general rigid bodies remain challenging. To this end, this study investigates the necessary conditions for a path of a cable of a CDPM wrapped on a smooth and frictionless rigid body. The solvability of the necessary conditions and the kinematics of the CDPM is explored then. It is shown that the kinematics of CDPMs with cables wrapped on rigid bodies, except for certain simple rigid bodies such as cylinders and spheres, is usually analytically unsolvable. To address the analytically unsolvable kinematics, the study develops a data-driven kinematic modeling and control strategy. The study applies the strategy to control the orientation of spatial rotational CDPM prototypes with wrapped cables and compares the strategy to a classical Jacobian-based kinematic control strategy. Experimental results indicate that for a CDPM allowing cables to wrap on a cylinder, the data-driven kinematic modeling and control strategy outperforms the Jacobian-based kinematic control strategy. For a CDPM allowing cables to wrap on a deformed cylinder, the data-driven kinematic modeling and control strategy can effectively control the CDPM. Note to Practitioners —This paper was motivated by the collision-free constraints of Cable-Driven Parallel Mechanisms (CDPMs) used in wearable devices. The collision-free constraints confine the workspace of the devices and make the devices bloated. This study systematizes a data-driven kinematic modeling and control strategy to allow the cables of a CDPM to wrap on complex rigid bodies and control the pose of the CDPM, for the first time. The necessity and implementation of the data-driven kinematic modeling and control strategy are presented. With the data-driven kinematic modeling and control strategy, the design of a CDPM for a wearable device or a device used in an environment with obstacles is more flexible. The data-driven kinematic modeling and control strategy is tested to demonstrate performance using CDPMs with cables wrapped on different rigid bodies.Keywords
Funding Information
- Guangdong Basic and Applied Basic Research Foundation (2021A1515110021, 2023A1515011010)
- Shenzhen Science and Technology Program (JSGG20210420091602008, RCBS20210609103819024)
- Research Foundation for Advanced Talents, Harbin Institute of Technology Shenzhen (CA11409019)
This publication has 51 references indexed in Scilit:
- Inverse and Forward Kineto-Static Solution of a Large-Scale Cable-Driven Parallel Robot using Neural NetworksMechanism and Machine Theory, 2022
- On the optimal energy efficiency of the multi-rotor UAVs of an aerial work platform based on an aerial cable towed robotMechanism and Machine Theory, 2022
- Modeling and Control of a Cable-Driven Parallel Robot Allowing Cable-edge Collisions2022
- Design of spatial adaptive cable-driven parallel robots with an unlimited rotation axis using the cable wrapping phenomenonMechanism and Machine Theory, 2022
- Design and optimization of three-degree-of-freedom planar adaptive cable-driven parallel robots using the cable wrapping phenomenonMechanism and Machine Theory, 2021
- A sample selection method specific to unknown test samples for calibration and validation sets based on spectra similaritySpectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 2021
- Experimental study on the kinematic control of a cable suspended parallel robot for object tracking purposeMechatronics, 2018
- Geometric Determination of the Cable-Cylinder Interference Regions in the Workspace of a Cable-Driven Parallel Robot2017
- A fast multi-obstacle muscle wrapping method using natural geodesic variationsMultibody System Dynamics, 2015
- Vibration analysis of cable-driven parallel manipulatorsMultibody System Dynamics, 2009