Formation and characterization of Pt-Cu-IPMC with high specific surface area and dendritic electrode
Authors:
- 17 February 2022
- journal article
- research article
- Published by Taylor & Francis in Composite Interfaces
- Vol. 29 (11) , 1203-1215
Abstract
Ionic polymer–metal composite (IPMC) is a kind of electroactive intelligent material. The dendritically interfacial electrodes (DIEs) is very important to the performance of IPMC. Herein, the copper–platinum composite electrode (Pt-Cu-IPMC) with a high specific area DIEs was prepared by combining impregnation-reduction plating platinum (IRP-Pt), autocatalytic plating platinum (ACP-Pt) and chemical reduction plating copper (CRP-Cu). The effects of DIEs and the cycles of ACP-Pt have been systematically investigated on the electrode’s thickness, micro-morphology and electromechanical response characteristics of all samples. Importantly, when the cycles of ACP-Pt increases, the platinum and copper particles in the ionomer membrane are highly dispersed. For example, when the cycles of ACP-Pt is 4, the penetration depth of the DIEs reaches 31.98 µm. Thus, copper and platinum dendrites were clearly observed in the samples. Combined with the analysis of the strain energy density, it showed that the presence of DIEs has some impact on the driving performance of the IPMC, the tip displacement, and blocking force of 67.27 mm and 27.21 mN have been achieved in the Pt-Cu-IPMC after three cycles of ACP-Pt. Graphical abstractKeywords
Funding Information
- the Key Laboratory Project of Expressway Construction Machinery of Shaanxi Province, China (300102259510)
- the SBU-BNL (1168726-9-63845)
- Provincial Joint Fund of Shaanxi (2021JLM-28)
- The National Natural Science Foundation of China (52172099)
- the National Science Foundation (2129673)
This publication has 30 references indexed in Scilit:
- Microassembly by an IPMC-based flexible 4-bar mechanismSmart Materials and Structures, 2012
- Carbon nanotube–graphene composite for ionic polymer actuatorsSmart Materials and Structures, 2012
- Hydrodynamics of underwater propulsors based on ionic polymer–metal composites: a numerical studySmart Materials and Structures, 2009
- Electrode reactions in Cu–Pt coated ionic polymer actuatorsSensors and Actuators B: Chemical, 2008
- Manufacture and performance of ionic polymer-metal compositesJournal of Bionic Engineering, 2007
- Multi-fields responsive ionic polymer–metal compositeSensors and Actuators A: Physical, 2007
- Ionic polymer–metal composites: III. Modeling and simulation as biomimetic sensors, actuators, transducers, and artificial musclesSmart Materials and Structures, 2004
- Investigations on actuation characteristics of IPMC artificial muscle actuatorSensors and Actuators A: Physical, 2003
- Ionic polymer metal composites: II. Manufacturing techniquesSmart Materials and Structures, 2003
- Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators and artificial muscles - a reviewSmart Materials and Structures, 1998