Flat R ‐Curve from Stable Propagation of Indentation Cracks in Coarse‐Grained Alumina
Authors:
- 1 February 1994
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 77 (2) , 315-322
Abstract
The fracture toughness of coarse‐grained A1 2 O 3 , known for pronounced “Iong”‐crack R‐curve behavior, was studied in the “short”‐crack regime utilizing the stable propagation of indentation cracks in bending. A combination of in situ microscopic crack growth observations and mechanical testing enabled measurement of crack extension curves. They reflect the contributions of residual indentation stress intensity and applied bending stress intensity on the total crack driving stress intensity and allow determination of the residual stress factor χ and the toughness K R . The results indicate that χ depends on indentation load and A R is surprisingly constant rather than increasing. To resolve the latter contradiction with long‐crack R‐curve behavior, combined short/long‐crack fracture tests were performed with the same specimens. Starting with stable indentation crack growth and continuing with stable long‐crack extension, the previous toughness results were confirmed, i.e., constant toughness from indentation cracks and increasing toughness from long cracks. The influence of crack‐opening behavior on bridging‐controlled R‐curve toughening can qualitatively explain the observed discrepancies.Keywords
This publication has 24 references indexed in Scilit:
- R ‐Curve Behavior and Flaw Insensitivity of Ce‐TZP/Al 2 O 3 CompositeJournal of the American Ceramic Society, 1993
- Objective Evaluation of Short‐Crack Toughness Curves Using Indentation Flaws: Case Study on Alumina‐Based CeramicsJournal of the American Ceramic Society, 1992
- Role of Grain Size in the Strength and R‐Curve Properties of AluminaJournal of the American Ceramic Society, 1990
- R‐Curve Behavior of Long Cracks in AluminaJournal of the American Ceramic Society, 1990
- R-curve behaviour of Al2O3 ceramicsActa Metallurgica et Materialia, 1990
- Perspective on the Development of High‐Toughness CeramicsJournal of the American Ceramic Society, 1990
- Crack‐Resistance Curves of Surface Cracks in AluminaJournal of the American Ceramic Society, 1988
- R-curve behaviour in a polycrystalline alumina materialJournal of Materials Science Letters, 1986
- A Modified Indentation Toughness TechniqueJournal of the American Ceramic Society, 1983
- A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness: I, Direct Crack MeasurementsJournal of the American Ceramic Society, 1981