Solution‐Processed Zinc Oxide as High‐Performance Air‐Stable Electron Injector in Organic Ambipolar Light‐Emitting Field‐Effect Transistors
- 23 August 2010
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 20 (20) , 3457-3465
Abstract
Electron injection from the source–drain electrodes limits the performance of many n‐type organic field‐effect transistors (OFETs), particularly those based on organic semiconductors with electron affinities less than 3.5 eV. Here, it is shown that modification of gold source–drain electrodes with an overlying solution‐deposited, patterned layer of an n‐type metal oxide such as zinc oxide (ZnO) provides an efficient electron‐injecting contact, which avoids the use of unstable low‐work‐function metals and is compatible with high‐resolution patterning techniques such as photolithography. Ambipolar light‐emitting field‐effect transistors (LEFETs) based on green‐light‐emitting poly(9,9‐dioctylfluorene‐alt‐benzothiadiazole) (F8BT) and blue‐light‐emitting poly(9,9‐dioctylfluorene) (F8) with electron‐injecting gold/ZnO and hole‐injecting gold electrodes show significantly lower electron threshold voltages and several orders of magnitude higher ambipolar currents, and hence light emission intensities, than devices with bare gold electrodes. Moreover, different solution‐deposited metal oxide injection layers are compared. By spin‐coating ZnO from a low‐temperature precursor, processing temperatures could be reduced to 150 °C. Ultraviolet photoemission spectroscopy (UPS) shows that the improvement in transistor performance is due to reduction of the electron injection barrier at the interface between the organic semiconductor and ZnO/Au compared to bare gold electrodes.Keywords
This publication has 35 references indexed in Scilit:
- Organic light-emitting transistors with an efficiency that outperforms the equivalent light-emitting diodesNature Materials, 2010
- Simultaneous Optimization of Light Gain and Charge Transport in Ambipolar Light-Emitting Polymer Field-Effect TransistorsChemistry of Materials, 2009
- Controlling Electron and Hole Charge Injection in Ambipolar Organic Field‐Effect Transistors by Self‐Assembled MonolayersAdvanced Functional Materials, 2009
- High‐Performance Organic Field‐Effect TransistorsAdvanced Materials, 2009
- Electron–Hole Recombination in Uniaxially Aligned Semiconducting PolymersAdvanced Functional Materials, 2008
- Improving charge injection in organic thin-film transistors with thiol-based self-assembled monolayersOrganic Electronics, 2008
- Electron and Ambipolar Transport in Organic Field-Effect TransistorsChemical Reviews, 2007
- Manipulation of charge carrier injection into organic field-effect transistors by self-assembled monolayers of alkanethiolsJournal of Materials Chemistry, 2007
- Spatial control of the recombination zone in an ambipolar light-emitting organic transistorNature Materials, 2005
- Mobility enhancement in conjugated polymer field-effect transistors through chain alignment in a liquid-crystalline phaseApplied Physics Letters, 2000