Hand–Eye Calibration in Visually-Guided Robot Grinding
Authors:
- 26 October 2015
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Cybernetics
- Vol. 46 (11) , 2634-2642
Abstract
Visually-guided robot grinding is a novel and promising automation technique for blade manufacturing. One common problem encountered in robot grinding is hand-eye calibration, which establishes the pose relationship between the end effector (hand) and the scanning sensor (eye). This paper proposes a new calibration approach for robot belt grinding. The main contribution of this paper is its consideration of both joint parameter errors and pose parameter errors in a hand-eye calibration equation. The objective function of the hand-eye calibration is built and solved, from which 30 compensated values (corresponding to 24 joint parameters and six pose parameters) are easily calculated in a closed solution. The proposed approach is economic and simple because only a criterion sphere is used to calculate the calibration parameters, avoiding the need for an expensive and complicated tracking process using a laser tracker. The effectiveness of this method is verified using a calibration experiment and a blade grinding experiment. The code used in this approach is attached in the Appendix.Keywords
Funding Information
- National Basic Research Program of China (2015CB057304)
- National Natural Science Foundation of China (51475187, 51421062)
- Fundamental Research Funds for the Central Universities (HUST2015TS063)
This publication has 15 references indexed in Scilit:
- 3-D Rigid Body Tracking Using Vision and Depth SensorsIEEE Transactions on Cybernetics, 2013
- Solving the Robot-World/Hand-Eye Calibration Problem Using the Kronecker ProductJournal of Mechanisms and Robotics, 2013
- Absolute calibration of an ABB IRB 1600 robot using a laser trackerRobotics and Computer-Integrated Manufacturing, 2013
- Hand–eye calibration and positioning for a robot drilling systemThe International Journal of Advanced Manufacturing Technology, 2011
- Accurate robotic belt grinding of workpieces with complex geometries using relative calibration techniquesRobotics and Computer-Integrated Manufacturing, 2009
- MEMS Optical Switches and Systems2008
- New Pose-Detection Method for Self-Calibrated Cameras Based on Parallel Lines and Its Application in Visual Control SystemIEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics), 2006
- Nongeometric error identification and compensation for robotic system by inverse calibrationInternational Journal of Machine Tools and Manufacture, 2000
- Simultaneous robot-world and hand-eye calibrationIEEE Transactions on Robotics and Automation, 1998
- Extrinsic calibration of a vision sensor mounted on a robotIEEE Transactions on Robotics and Automation, 1992