Relations between high‐temperature mastication and Mooney viscosity relaxation in natural rubber
Authors:
- 1 May 2009
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 113 (5) , 2785-2790
Abstract
Mastication of natural rubber (NR) is undertaken as a preliminary step towards the preparation of NR‐based vulcanizates, a process during which the elastomer is broken down to a homogeneous matrix of lower viscosity. Several tests and indicators are in use for characterizing the behavior of elastomers but these have mostly been adopted for the nonmasticated product. This study uses coefficients generated from modeled Mooney relaxation data, as indicators of elasticity, to examine the effect of high‐temperature mastication on the processability of the masticated rubber. Some derived coefficients such as the terminal relaxation time (τ) from Maxwell's triexponential model, the elastic component (a) from Wu‐Abbott model [Y = 1 + a* ln(t) − bt/(c + t)], and the constant (b) from the Power law model (Y = at−b), adequately characterized the effect of mastication on NR. Although the NR grades studied were quite different with respect to their initial molar mass distributions, they followed a similar response to the mechanical models before and after mastication, indicating therefore that mastication decomposes to a similar extent, the various components (long isoprene chains, densely crosslinked solvent‐insoluble gel, etc.) that account for the viscoelastic behavior of the raw elastomer. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009Keywords
This publication has 15 references indexed in Scilit:
- High‐temperature mastication of raw natural rubber: Changes in macrostructure and mesostructurePolymer Engineering & Science, 2005
- Firmness and force relaxation characteristics of tomatoes stored intact or as slicesPostharvest Biology and Technology, 2002
- Relationships Between Mixing Method, Microstructure and Strength of Nr:Br BlendsRubber Chemistry and Technology, 2001
- Flow analysis of natural rubber in a capillary rheometer. 1: Rheological behavior and flow visualization in the barrelPolymer Engineering & Science, 1997
- Influence of gel and molecular weight on the properties of natural rubberPolymer, 1986
- Processability TestingRubber Chemistry and Technology, 1981
- Correlating mooney viscosity to average molecular weightJournal of Applied Polymer Science, 1972
- Degradation of natural rubber during mill masticationJournal of Applied Polymer Science, 1966
- Inhibition of Hardening in Natural RubberRubber Chemistry and Technology, 1962
- Mastication of rubber, I. Mechanism of plasticizing by cold masticationJournal of Polymer Science, 1952