Hydrophobic Cellulose-based Materials Obtained by Uniaxial High Pressure Compression: In-situ Esterification with Fatty Acids and Fatty Anhydrides
Open Access
- 4 May 2015
- journal article
- Published by BioResources in BioResources
- Vol. 10 (3) , 4626-4640
Abstract
High-pressure molding at an elevated temperature was investigated as a potential technique for performing the esterification of octanoïc acid and octanoïc anhydride on cellulose and miscanthus. Emulsion, solvent exchange, and high-pressure homogenizer pretreatments were performed on the reactants in order to improve liquid-solid contacts. After pretreatment, cellulose or miscanthus and octanoïc acid or octanoïc anhydride were molded at 220 MPa and an elevated temperature. The mechanical properties of the resulting compressed materials were measured, and the material was then ground and washed; the water drop angle was measured, and IR analysis was performed, as well as an accurate measure of the degree of substitution. The esterification reaction was confirmed, the water properties of the grafted cellulose were modified, and the mechanical properties of the modified materials were altered. From this pioneering work, a better understanding of the effect of the molding process on the reaction and production of water-resistant compressed cellulose materials was developed.Keywords
This publication has 22 references indexed in Scilit:
- Bi-acylation of cellulose: determining the relative reactivities of the acetyl and fatty-acyl moietiesCellulose, 2011
- Optically Transparent Nanofiber PaperAdvanced Materials, 2009
- Accurate determination of the degree of substitution of long chain cellulose estersCellulose, 2008
- Surface modification of cellulose with plant triglycerides for hydrophobicityCellulose, 2007
- Oxygen and water vapor permeability of fully substituted long chain cellulose esters (LCCE)Cellulose, 2007
- Controlled heterogeneous modification of cellulose fibers with fatty acids: Effect of reaction conditions on the extent of esterification and fiber propertiesJournal of Applied Polymer Science, 2006
- Thermal Modification of Wood2006
- Long chain cellulose esters with very low DS obtained with non-acidic catalystsCellulose, 2005
- 3. Acetate manufacturing, process and technology 3.1 Chemistry of cellulose acetylationMacromolecular Symposia, 2004
- A review on interface modification and characterization of natural fiber reinforced plastic compositesPolymer Engineering & Science, 2001