Temperature Drop Characteristics of Crude Oils After Shutdown of a Pipeline for a Batchwise Transportation System
Authors:
- 15 October 2012
- journal article
- research article
- Published by Taylor & Francis in Heat Transfer Engineering
- Vol. 34 (4) , 385-397
Abstract
In recent years, it has been proposed to transport different crude oils in a batchwise operation in a pipeline. In this article, thermal models of the normal operation and shutdown processes are established and advanced numerical methods are employed. Thermal characteristics during normal operation and shutdown are analyzed in detail through numerical simulation. Shutdown occasion parameters are defined to describe the unique shutdown state during a batch. Conclusions can be drawn that the temperature distribution in a batchwise operation is greatly different from that of an ordinary hot oil pipeline. The temperature drop during the shutdown process is determined by shutdown occasion parameters and shutdown duration. Even if there is the same crude oil in the pipeline, the temperature distributions at different occasions have significant differences. When the front of high-pour-point (HPP) oil attains the pipeline outlet, the shutdown hazard is the greatest, with the longest HPP oil segment in the pipeline and the fastest temperature drop rate during shutdown. The results not only provide a reference for the real operation of the pipeline, but also lay a foundation for further study of the restart process of the pipeline in batchwise transportation.Keywords
This publication has 4 references indexed in Scilit:
- Numerical simulation of a buried hot crude oil pipeline under normal operationApplied Thermal Engineering, 2010
- Numerical simulation of a buried hot crude oil pipeline during shutdownPetroleum Science, 2010
- Numerical Simulation on the Thermal and Hydraulic Behaviors of Batch Pipelining Crude Oils with Different Inlet TemperaturesOil & Gas Science and Technology – Revue d’IFP Energies nouvelles, 2009
- Automatic generation of unstructured grids with Delaunay triangulation and its applicationHeat and Mass Transfer, 1999