F and N Rich Solid Electrolyte for Stable All‐Solid‐State Battery
Authors:
- 26 December 2021
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 32 (15) , 2110876
Abstract
The instability of sulfide solid electrolytes to Li anode and high‐voltage LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes limits the cyclic performance of all‐solid‐state lithium battery (ASSLB). Herein, the stability of Li6PS5Cl against Li anode is enhanced by mixing a small amount (0.32 wt%) of CuF2‐LiNO3 (CL) into Li6PS5Cl electrolyte layer to in‐situ form a mixed‐conductive‐lithiophobic and self‐healing LiF‐Li3N‐Cu solid electrolyte interphase (SEI) at Li6PS5Cl‐CL/Li interface. The critical current density (CCD) of Li6PS5Cl‐CuF2‐LiNO3 increases to 1.4 mA cm–2/1.4 mAh cm–2 at room temperature, which is much higher than that of pristine Li6PS5Cl (0.4 mA cm–2/0.4 mAh cm–2) even though mixing 0.32 wt% CL into Li6PS5Cl slightly reduces the ionic conductivity from 2.9 × 10–3 to 1.5 × 10–3 S cm–1. The compatibility of Li6PS5Cl‐CL electrolyte to single‐crystalline NMC811 (S‐NMC811) is further enhanced by adding a small amount (0.02 wt%) of AlF3 into Li6PS5Cl‐CL forming Li6PS5Cl‐CuF2‐LiNO3‐AlF3 (Li6PS5Cl‐CLA) as a cathode electrolyte and by doing Cl– on S‐NMC811 (Cl@S‐NMC811) surface. The Cl@S‐NMC811‐Li6PS5Cl‐CLA|Li6PS5Cl‐CL|Li cells with areal capacity of 2.55 mAh cm‐2 achieve a capacity retention of 69.4% after 100 cycles at 1C (1C = 200 mAh g‐1). Adding a small amount of SEI and cathode/electrolyte interphase (CEI) former into the sulfide electrolytes with minimal reduction (48.3%) of ionic conductivity is an effective method to enhance the performance of ASSLB.Keywords
Funding Information
- U.S. Department of Energy (DEEE0008856)
- Advanced Research Projects Agency (DE‐AR0000781)
This publication has 26 references indexed in Scilit:
- High electronic conductivity as the origin of lithium dendrite formation within solid electrolytesNature Energy, 2019
- Inducing Favorable Cation Antisite by Doping Halogen in Ni‐Rich Layered Cathode with Ultrahigh StabilityAdvanced Science, 2018
- Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal batteryScience Advances, 2018
- An Electron/Ion Dual‐Conductive Alloy Framework for High‐Rate and High‐Capacity Solid‐State Lithium‐Metal BatteriesAdvanced Materials, 2018
- Robust AlF3 Atomic Layer Deposition Protective Coating on LiMn1.5Ni0.5O4 Particles: An Advanced Li-Ion Battery Cathode Material PowderACS Applied Energy Materials, 2018
- Interface engineering of sulfide electrolytes for all-solid-state lithium batteriesNano Energy, 2018
- LaF3 nanolayer surface modified spinel LiNi0.5Mn1.5O4 cathode material for advanced lithium-ion batteriesCeramics International, 2018
- Enhanced electrochemical performances and thermal stability of LiNi 1/3 Co 1/3 Mn 1/3 O 2 by surface modification with YF 3Journal of Alloys and Compounds, 2017
- Functioning Mechanism of AlF3 Coating on the Li- and Mn-Rich Cathode MaterialsChemistry of Materials, 2014
- Improvement of long-term cycling performance of Li[Ni0.8Co0.15Al0.05]O2 by AlF3 coatingJournal of Power Sources, 2013