Numerical Simulation of Solidification Structures of Ag–28Cu–1Ni Alloy through Continuous Casting Based on Three-Dimensional CAFE Method
Authors:
- 1 July 2020
- journal article
- research article
- Published by Japan Institute of Metals in MATERIALS TRANSACTIONS
- Vol. 61 (7) , 1230-1238
Abstract
Microstructure evolution of Ag–28Cu–1Ni alloy during the continuous casting process was simulated based on 3D-CAFE method, and the effect of the mean nucleation undercooling and the distance from the bottom of the ingot to the cross section on the solidification structure were studied. Furthermore, the effects of pouring temperature, heat transfer coefficient and pulling speed on solidification structure were also investigated. The results show that the simulated results are in agreement with the experimental results. The solidification structure consists of four parts, including region of surface fine grain, zone of columnar grain, transition zone of CET (columnar to equiaxed grain transition) and region of center equiaxed grain. The higher the mean undercooling, the larger the columnar dendrite zone. The ΔTv,max = 5 K is determined as an important simulation parameter to simulate the microstructure evolution. As the cross-section increases from the bottom of the ingot, the columnar crystal regions gradually expand. Moreover, lowering the pouring temperature, increasing the heat transfer coefficient or improving the pulling speed have the beneficial effect on grain refinement. Under the optimal process conditions, the largest proportion of equiaxed grains and the finer grain size is present in the solidified structure.Keywords
This publication has 24 references indexed in Scilit:
- 3D CAFE modeling of grain structures: application to primary dendritic and secondary eutectic solidificationModelling and Simulation in Materials Science and Engineering, 2011
- Effect of solubility on strengthening of Ag–Cu ultrafine eutectic compositesJournal of Alloys and Compounds, 2011
- Impact Properties of Lead-Free Sn-Ag-Cu-Ni-Ge Solder Joint with Cu ElectrodeMATERIALS TRANSACTIONS, 2008
- A New Semi-analytical Model for Prediction of the Strand Surface Temperature in the Continuous Casting of Steel in the Mold RegionISIJ International, 2008
- Columnar front tracking algorithm for prediction of the columnar-to-equiaxed transition in two-dimensional solidificationModelling and Simulation in Materials Science and Engineering, 2006
- Enthalpy, heat of fusion and specific electrical resistivity of pure silver, pure copper and the binary Ag–28Cu alloyThermochimica Acta, 2006
- A Modified Cellular Automaton Model for the Simulation of Dendritic Growth in Solidification of Alloys.ISIJ International, 2001
- Numerical modeling of solidification morphologies and segregation patterns in cast dendritic alloysActa Materialia, 1999
- A coupled finite element-cellular automaton model for the prediction of dendritic grain structures in solidification processesActa Metallurgica et Materialia, 1994
- Probabilistic modelling of microstructure formation in solidification processesActa Metallurgica et Materialia, 1993