Line patterning for flexible and laterally configured electrochromic devices

Authors:
Publisher website
Google Scholar
Abstract
We have applied the line patterning method, which involves printing of patterns on a plastic or paper substrate using a commercial printer followed by coating of the non-printed areas by a conductive polymer, or metal conductor, to build laterally configured polymer and metallic interdigitated electrodes (IDEs) for electrochromic devices (ECDs). Selective deposition of transparent poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonate) (PEDOT–PSS) or electroless gold films resulted in lateral electrode resolution values of ∼30 µm as determined by optical microscopy. These ECDs comprise complementary colored, dioxythiophene based electrochromic polymers deposited on alternating fingers of gold coated IDEs and a viscous electrolyte layer to enable ion transport between the polymers. The devices are switched by stepping the applied voltage between −1.2 V to +1.2 V and pass a maximum of 1.3 mA cm−2 and a switching charge of 1.2 mC cm−2 in ∼3 s to switch the device from a highly reflective gold state to an absorptive blue state. Three IDEs with different anode to cathode distances have been line patterned via electroless gold deposition. Electrochromic switching kinetics of 2-lane, 4-lane, and 6-lane ECDs have been studied by applying potential steps from −1.0 V to +0.8 V and monitoring the reflectance change as a function of time. The switching times to reach 85% of the full contrast are 4.3 s, 1.5 s, and 0.8 s for the 2-lane, 4-lane, and 6-lane devices, respectively. The extent of interdigitation noticeably improves the switching performance of lateral ECDs due to shorter diffusion distances for dopant ions and minimal electrolyte resistance.

This publication has 17 references indexed in Scilit: